Sx05 Retro Edition V1.2 with video prewviews!

[jackmate]

Hi ,i bought a cheap usb snes controller,but emulationstation is not detecting,may be config has no snes usb gamepad.
But when i launch retroarch controller works fine.its only emulationstation doesn't work.
Can u pls add this usb controller too.
Thanks
Controller i have is the fist picture shown in this page.

https://github.com/retropie/retropie-setup/wiki/RetroArch-Configuration

This is an example config for a USB SNES controller

input_device = "USB gamepad "
input_driver = "udev"
input_r_btn = "5"
input_save_state_btn = "5"
input_start_btn = "9"
input_exit_emulator_btn = "9"
input_l_btn = "4"
input_load_state_btn = "4"
input_up_axis = "-1"
input_a_btn = "1"
input_b_btn = "2"
input_reset_btn = "2"
input_down_axis = "+1"
input_right_axis = "+0"
input_state_slot_increase_axis = "+0"
input_x_btn = "0"
input_menu_toggle_btn = "0"
input_select_btn = "8"
input_enable_hotkey_btn = "8"
input_y_btn = "3"
input_left_axis = "-0"
input_state_slot_decrease_axis = "-0"


Sent from my iPhone using Tapatalk

[niabi]

Hi ,i bought a cheap usb snes controller,but emulationstation is not detecting,may be config has no snes usb gamepad.
But when i launch retroarch controller works fine.its only emulationstation doesn't work.
Can u pls add this usb controller too.
Thanks
Controller i have is the fist picture shown in this page.

https://github.com/retropie/retropie-setup/wiki/RetroArch-Configuration

This is an example config for a USB SNES controller

input_device = "USB gamepad "
input_driver = "udev"
input_r_btn = "5"
input_save_state_btn = "5"
input_start_btn = "9"
input_exit_emulator_btn = "9"
input_l_btn = "4"
input_load_state_btn = "4"
input_up_axis = "-1"
input_a_btn = "1"
input_b_btn = "2"
input_reset_btn = "2"
input_down_axis = "+1"
input_right_axis = "+0"
input_state_slot_increase_axis = "+0"
input_x_btn = "0"
input_menu_toggle_btn = "0"
input_select_btn = "8"
input_enable_hotkey_btn = "8"
input_y_btn = "3"
input_left_axis = "-0"
input_state_slot_decrease_axis = "-0"


Sent from my iPhone using Tapatalk

Press enter on the keyboard to bring up the emulationstation menu, then select configure input, then press and hold a button on your USB controller to configure it in emulationstation.

Sent from my Lenovo K50-t5 using Tapatalk

[fuckia]

Hello, thanks for your great work!!
I have a usb xbox one s controller but not recognised. I know that xpad.c file has been update in this project with a patch (https://github.com/afl1/LibreELEC.tv...nux/xbox.patch) and work fine in LibreElec. Could you update it in the next versions? Thanks and regards.

[jackmate]

Press enter on the keyboard to bring up the emulationstation menu, then select configure input, then press and hold a button on your USB controller to configure it in emulationstation.

Sent from my Lenovo K50-t5 using Tapatalk

I can't try that,as my box has 2 usb ports.One usb is used for booting ur build.other I plug in USB game pad,can't get to configure.
even i delete the es_input config file from SSH,defaut es_config automatically load there.I don't get configure controller option in screen.Are you able to add the config for USB snes controller .
thanks

[niabi]

I can't try that,as my box has 2 usb ports.One usb is used for booting ur build.other I plug in USB game pad,can't get to configure.
even i delete the es_input config file from SSH,defaut es_config automatically load there.I don't get configure controller option in screen.Are you able to add the config for USB snes controller .
thanks

Don't delete the es_input file, you need to empty it,

rm es_input.cfg
touch es_input.cfg

then restart.

[niabi]

Hello, thanks for your great work!!
I have a usb xbox one s controller but not recognised. I know that xpad.c file has been update in this project with a patch (https://github.com/afl1/LibreELEC.tv...nux/xbox.patch) and work fine in LibreElec. Could you update it in the next versions? Thanks and regards.

I will implement it

[niabi]

v1.2a released

[niabi]

v1.3 source code updated, read first message

[pinguy]

Noticed you said Libreto-PPSSPP wouldn't compile on 8. The version from AlexELEC works fine for me on 8. But as you mentioned not a lot of point having it if you are using the the stand-alone app. But if your ever wanted to included it, AlexELEC compiled version is an option.

EDIT:

By the way could you take a look at "parallel psx libretro" core.

[niabi]

Noticed you said Libreto-PPSSPP wouldn't compile on 8. The version from AlexELEC works fine for me on 8. But as you mentioned not a lot of point having it if you are using the the stand-alone app. But if your ever wanted to included it, AlexELEC compiled version is an option.

EDIT:

By the way could you take a look at "parallel psx libretro" core.

AlexELec I think is based on v7 of LE, it uses some older tools to compile that is why it compiles withouth a problem there.

[niabi]

I made a new post since I can't updated the title on this one

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905/others-ac/634904-sx05re-is-emulationstation-lakka-libreelec-with-kodi

[doriann]

Working in tv box with amlogic s912

[niabi]

Working in tv box with amlogic s912

No, only on S905

[sutty86]

Sounds right up my street for the kids.
i take it , just extract onto a sd and flash through recovery

[niabi]

Sounds right up my street for the kids.
i take it , just extract onto a sd and flash through recovery

not quite, you need to use Win32imgwriter or rufus or Etcher to write the img to an SD card, then boot up the machine while holding the reset pinhole, the system runs from an SD card, android is not touched.

and btw there is a new version here :

https://github.com/shantigilbert/LibreELEC.tv/releases/tag/1.4b