My t428 cooling and case mod

[neoal]

Re: My t428 cooling and case mod

neoal, after reading your problem, I think I know what the cause might be.
The chinese often use crappy USB slave control chips, in our case, it is the Active 8847QM (don't ask me, it is a completely noname brand, couldn't even find any reference to it online!). I think that on yours, this very chip might be damaged, at least I would think so.
If not, it might be an interruption in the circuitry, maybe a badly welded microUSB header. These can be tested, as, our device, fortunately is made in a way that both USB slots can act as either host, or slave. So if you have a Male-to-male A USB cable, you can try it out (while it *should* detect the device, I doubt this method will result in an actually working USB port. Blame Android for this ).

Alas, you can also update without USB. Simply put an update.img on an sd card root, pop it in, and it should be detected by the system, and ask you to reboot to apply the update. No repartitioning, unfortunately, but you can at least update to new releases.

i tried with the male to male A usb cable but it didnt connect at all so i think its not the same as the otg port so im really sad to say that this isnt the solution to this problem

Sent from my T428 using Tapatalk 4 Beta

[neoal]

Re: My t428 cooling and case mod

Well the stick is gone to trash now but i still have a few pics before the trash part, and with the external antenna the wifi was sa damn stable, hope u like the mod:


Sent from my GT-S7562 using Tapatalk 4 Beta

[leolas]

Re: My t428 cooling and case mod

Well the stick is gone to trash now but i still have a few pics before the trash part, and with the external antenna the wifi was sa damn stable, hope u like the mod:


Sent from my GT-S7562 using Tapatalk 4 Beta

Wait!!
Have you try ftom linux with the tool I said?

Or the shorting nand pins method to enter rom mask mode?

leolas

[neoal]

Re: My t428 cooling and case mod

Have you try ftom linux with the tool I said?


leolas

Sorry leolas but maybe i have lost it a little bit. Which tool was that. Thxxx

Sent from my GT-S7562 using Tapatalk 4 Beta

[neoal]

Re: My t428 cooling and case mod

Wait!!
Have you try ftom linux with the tool I said?

Or the shorting nand pins method to enter rom mask mode?

leolas

If i enter mask mode will it reset the usb too osr just the mempry with the data??

Sent from my GT-S7562 using Tapatalk 4 Beta

[leolas]

Re: My t428 cooling and case mod

If i enter mask mode will it reset the usb too osr just the mempry with the data??

Sent from my GT-S7562 using Tapatalk 4 Beta

I dont discard that it is a driver problem, please wait a second while i search, i sm from tapatalk and it is a nightmare to search a specific post

leolas

[leolas]

Re: My t428 cooling and case mod

http://www.FreakTab.com/showthread.php?t=5767

Try this, there is no need of any drivrr snd it must deyect your stick in loader mode.
Other option is short nand pins to mahe the device enter inask rom mode. But the it can't be flashed from linux.
leolas

[neoal]

http://www.FreakTab.com/showthread.php?t=5767

leolas

well here is 1:30am but im gonna check this imediately from my desktop leolas. really thxxxxxx

[leolas]

Re: My t428 cooling and case mod

well here is 1:30am but im gonna check this imediately from my desktop leolas. really thxxxxxx

Same time zone in Spain and I am exaust, but pleade befote launch it to thash, lets try more things, i love your mod and i dont want to see it in the dustbin.

leolas
Edit: OMG trying to write fast from the mobile and exhaust is hard. Don't throw it to trash and tomorrow I will try to help you.

[neoal]

http://www.FreakTab.com/showthread.php?t=5767

Try this, there is no need of any drivrr snd it must deyect your stick in loader mode.
Other option is short nand pins to mahe the device enter inask rom mode. But the it can't be flashed from linux.
leolas

now i just need to install this gui but dont know how and there are no instructions on linux. here where i live im like a guru of windows but with linux is another thing. i have a laptop with lubuntu installed. i know that it can install deb packaged or with the apt-get install command i can install other packages but how do i add the github as a repo or i dont know

[leolas]

Re: My t428 cooling and case mod

now i just need to install this gui but dont know how and there are no instructions on linux. here where i live im like a guru of windows but with linux is another thing. i have a laptop with lubuntu installed. i know that it can install deb packaged or with the apt-get install command i can install other packages but how do i add the github as a repo or i dont know

In the github there is a .deb package, install it with dkpkg.
Sorry but need to sleep, tomorrow we will follow this.

leolas

[neoal]

In the github there is a .deb package, install it with dkpkg.
Sorry but need to sleep, tomorrow we will follow this.

leolas

rkflashkit doesnt detect the device, the devices part and nand partitions are greyd out. no luck with that or is there any driver that i need to install to linux too

[leolas]

Re: My t428 cooling and case mod

rkflashkit doesnt detect the device, the devices part and nand partitions are greyd out. no luck with that or is there any driver that i need to install to linux too

Definitly no drivers needed in linux,

leolas

[neoal]

Definitly no drivers needed in linux,

leolas

i connected to the usb port and on the terminal type lsusb but it shows only the usb ports of the laptop but no device

[leolas]

Re: My t428 cooling and case mod

i connected to the usb port and on the terminal type lsusb but it shows only the usb ports of the laptop but no device

Sorry, then no more ideas

leolas