H96 Pro Plus short pin unbrick help

[mn.ll.eo]

Thank you, Blinky, for welcoming me and for helping me with with your reply, I appreciate it.
I fixed the licence folder and the mac_ether.ini file. But when I run everything on usb-burning-tool, nothing happens. It does not recognize my box at all. My computer also doesn't recognize my box at all. I have a R-TV S10 android tv box, 3G DDR4, 32GB Amlogic S912 octa core. Last week it just stopped working. No signal on tv, and the blue light stays on all the time. The remote doesn't do anything, even doesn't turn the box off. I tried different usb 2.0 cables, different usb ports, using the new-usb-burning-tool.
Any suggestion would truly be appreciated,
Thank you!

[blinkone]

Hello.

Please help me!

I don't have any licence folder in the Amlogic USB_burning-tool folder. Also, I don't see any file mac_ether.ini? Can anyone please help me where are these files and folders? Am I installing Amlogic USB_burning-tool wrong?

Your help would really be appreciated.

Thank you.

Hi and welcome to freaktab.

There is a version of the burning tool on freaktab with the licence file already there but I cant find it right now

A licence folder can be found here & you will need to add it to the burning tool directory.If you don't have licence folder in the burning tool directory,Create one and unzip the licence zip into that folder

Download and install this file into your burning tool Licence directory before starting the burning tool.

c:/programfiles/amilogic/burning tool/licence

Blinky

[mn.ll.eo]

Hello.

Please help me!

I don't have any licence folder in the Amlogic USB_burning-tool folder. Also, I don't see any file mac_ether.ini? Can anyone please help me where are these files and folders? Am I installing Amlogic USB_burning-tool wrong?

Your help would really be appreciated.
Thank you.

[dangchui]

Hello
for the box h96 PRO+ Fully bricked model wisdom 2.2 model PCB GREEN :

no led blue no red light
no connexion on usb burning tools no red light on spdif

i have info for the shorpin circuit possible
i have found this

i try this immediatly

but i see the firmware wisdom post here have problem with mac adress that s write on right panel MAC 0

It s necessary to modify the file ether.ini in directory of usb burning tools /license/

to write this :

mac_ether.ini file:


[Group1]
start = 78:c2:c0:91:57:99
end = 78:c2:c0:91:97:ff
used = 89


[fragment]
fragment =




2 Photos

[neutester]

hey Guy's it seems like a common issue for this box to brake down...i have one that does not boot anymore stays at the H96 plus screen, so i downloaded the correct FW and flashed it successfully. when i plug it to the tv i boots to the Android No command screen? i tried 3 different FW and still the same??

This method:

Tutorial the flash
Use Windows 7
Instal USB Burning Tool
On your computer, go to C:\Program Files\Amlogic\USB_Burning_Tool\WorldCup_Device.
In that folder is an exe file named, "InstallDriver.exe", run that, if you get permission dialog popups, allow them.
For Burning Tool Download and install this file into your burning tool Licence directory before starting the burning tool.
c:/programfiles/amilogic/burning tool/licence

https://www.dropbox.com/s/8gwrcd6d43t6pqj/mac_ether.ini?dl=0

Restart computer

Disable Protection Virus
Start usb burning tool
Load the image Beelink GT1 Ultimate SCV1
Then connect your box its usb cable (it's USB near power supply )
Then connect your box its to the power supply
Push the reset button.
Press start
Enjoy

Have you tried a different power adapter? It sounds like you are able to load the firmware with the USB burning tool on the computer, but when you connect the power supply it does not completely boot up. The second thing I would try is another HDMI cable, but I suspect the power supply first.

[techker]

hey Guy's it seems like a common issue for this box to brake down...i have one that does not boot anymore stays at the H96 plus screen, so i downloaded the correct FW and flashed it successfully. when i plug it to the tv i boots to the Android No command screen? i tried 3 different FW and still the same??

This method:

Tutorial the flash
Use Windows 7
Instal USB Burning Tool
On your computer, go to C:\Program Files\Amlogic\USB_Burning_Tool\WorldCup_Device.
In that folder is an exe file named, "InstallDriver.exe", run that, if you get permission dialog popups, allow them.
For Burning Tool Download and install this file into your burning tool Licence directory before starting the burning tool.
c:/programfiles/amilogic/burning tool/licence

https://www.dropbox.com/s/8gwrcd6d43t6pqj/mac_ether.ini?dl=0

Restart computer

Disable Protection Virus
Start usb burning tool
Load the image Beelink GT1 Ultimate SCV1
Then connect your box its usb cable (it's USB near power supply )
Then connect your box its to the power supply
Push the reset button.
Press start
Enjoy

[Jackie101]

Hello, friends!
Can you help me with my bricked H96 Pro Plus?

The version of my TV Box is: S32-V3 (DDR4)


I try to flash this firmware: aml_7.1_s912_q9377-H96PROPLUS_mac-20170422

In Burning Tool I stuck at 4% with this error:
[2017-12-25 00:48:29 587][HUB7-1][0x139f0902]Unknown

When I push Stop and Start Button for a couple times I have this error in 4%:
[2017-12-25 00:33:08 644][HUB7-1][0x10303004]Romcode/Switch status/Identify/Error result

Computer doesn't see my TV Box without shorting the pins.

OS: Windows 7
USB Burning Tool version 2.0.8

Here is my mac_ether.ini file:

---------------------------------------------------

[Group1]
start = 78:c2:c0:91:57:99
end = 78:c2:c0:91:97:ff
used = 89


[fragment]
fragment =

---------------------------------------------------

And here is the MAC of my device: MAC: 78:C2:C0:97:23:B7

Maybe I need some other firmware, or I need to change my mac_ether.ini settings?

Please, need some help.

[gefattern]

moved this post to here better to find for Users

[Jackie101]

Hello pitarrus

You have W7 or W10?

On your computer, go to C:\Program Files\Amlogic\USB_Burning_Tool\WorldCup_Device.
In that folder is an exe file named, "InstallDriver.exe", run that, if you get permission dialog popups, allow them.
For Burning Tool Download and install this file into your burning tool Licence directory before starting the burning tool.
c:/programfiles/amilogic/burning tool/licence
https://www.dropbox.com/s/8gwrcd6d43t6pqj/mac_ether.ini?dl=0

Good day! Can you reupload the mac_ether.ini file add give me a link please? Have a problems with my bricked H96 Pro+. Stucked on 2% in Burning Tool.
Thanks!

[marcoscreiodeus]

Gravei este video mostrando como dá o curto na h96 pro PLUS BRICKED. No video mostro passo a passo o curto e a troca da ROM. Também, seguem IMAGENS DO LOCAL DO CURTO na descrição do vídeo abaixo no youtube:

https://youtu.be/Hgw4S6RgRBE

[Mischel68]

Hello

After some time of tasting, the burning process now stops at 2%. I'm using version 2.12 now. But it does not help.
Error code:

[2017-12-05 20:57:22 989][HUB3-3][0x10105004]Romcode/Initialize DDR/Read initialize status/Error result
[2017-12-05 20:57:26 625][HUB3-3][0x10105004]Romcode/Initialize DDR/Read initialize status/Error result

LOG:

[21:51:34 396][HUB3-3][Inf]--------------ERASE BOOTLOADER------------
[21:51:34 905][HUB3-3][Inf]--2-2-0-0
[21:51:34 905][HUB3-3][Inf]-------------Download DDR.USB-----------
[21:51:34 906][HUB3-3][Inf]--2-2-0-0
[21:51:34 906][HUB3-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[21:51:35 412][HUB3-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[21:51:35 928][HUB3-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[21:51:36 443][HUB3-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[21:51:36 959][HUB3-3][Inf]--Write initial succeed
[21:51:36 959][HUB3-3][Inf]--Upload encrypt at 0xc8100228
[21:51:36 959][HUB3-3][Inf]--ulValue = 0xadfc318c
[21:51:36 959][HUB3-3][Inf]--Read encrypt value succeed
[21:51:36 959][HUB3-3][Inf]--Transfer complete
[21:51:36 959][HUB3-3][Inf]--Run at address 0xd9000000
[21:51:36 975][HUB3-3][Inf]--RunInRam succeed
[21:51:37 490][HUB3-3][Inf]--IOCTL_IDENTIFY_HOST_Handler ret=-5 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: Ein an das System angeschlossenes Gerät funktioniert nicht.

[ciechon]

Try this more http://4pda.ru/forum/index.php?showt...ost&p=66468620

[marcoscreiodeus]

Hello Guys
Im sorry but im a newbie on android box
and sorry for my bad english.

I have a very big problem with my AndroitBOX
I just can not find any working frimware for my box I can not flash the frimware/box
The Box is not Booting
i can not flashing with SD card becouse i see nothing on the my TV HDMI is not connecting with box ( Signal Fail )

Who can help me and give me Tipps ?


or do I have to order a new BoX?

Did you try this method?

https://youtu.be/Hgw4S6RgRBE

[marcoscreiodeus]

Hi i have a same problem my box H96 pro plus buying at aliexpress is brick can you help me i dont know where is a PIN in my motherboard.

Hello! You did it?

[Halibo]

Hello Guys
Im sorry but im a newbie on android box
and sorry for my bad english.

I have a very big problem with my AndroitBOX
I just can not find any working frimware for my box I can not flash the frimware/box
The Box is not Booting
i can not flashing with SD card becouse i see nothing on the my TV HDMI is not connecting with box ( Signal Fail )

Who can help me and give me Tipps ?


or do I have to order a new BoX?