H96 Pro Plus short pin unbrick help

[pulesky]

Thank you for your help,
my actual power is 5v and 2500mah.
I will try to buy as you advice me.

Regards

I receive my new box from bangood. I update it to nougat it work fine.
I would like to put a armbian following balbes150 tutorial but I don't find the local update...
For the bricked one no news...

Envoyé de mon SM-T580 en utilisant Tapatalk

[pulesky]

Thank you for your help,
my actual power is 5v and 2500mah.
I will try to buy as you advice me.

Regards

[gefattern]

Hi pulesky ,

not really , but buy for sure one with more /mah/ 3000 shall be enough , why dont u use the big Bay .

Remember always the same Voltage , only more mah from 2000 to 3000mah .

I think it shall be better for your Box if u use a CustomRom . Later i can guide you to a Rom for your

Device . greetings / gefattern

[pulesky]

Hello geffatern,
Ah this Time nothing better... always blue led and black screen. I only trying to flash some Rom. do you have a link for a new Power supply?

[gefattern]

Hi pulesky ,

is it really DDR3 ??? did u saw it on Chip , never trust the Specs they gave ,what about a better Powersupply with more /mah/ , (3000)

no other Voltage . good luck / gefattern

[pulesky]

Hello all i ve a H96 pro plus DDR 3 and since i receive it i never can launch it. the only think i ve ever see is the yellow logo of h96 pro.
i try to flash some img but nothing new. still have black screen and nothing on HDMI... does it factory bricked or factory default?
sorry for my english
thank you for your help

[PazDAlma]

Thanks to many of you people, I brought my h96 pro+ ddr4 from the dead, I used a male to male cable connected to the pc, and pin short the Samsung chip, on the 5 and 6 pins on the left, while running the amolgic USB burn tool, till it was detected by de PC, I used this video https://youtu.be/KO0o7eWnCCA as a guide, but instead os hitting the reset I short the pins on the Samsung chip. It is brand new again. Thank you all for the help. Sorry my bad English

[Flash125]

I opened both of the H96 Pro Plus boxes I have today to try and help you out. One clearly says it's "MAIN(DDR4)" ram right on the board in plain sight and a sticker with "CZ 3G+32G+9377 JOB 20170218" printed on it. On the back side of the board it has these numbers "CZ-S32-V3(DDR4) 2016-12-15(A15)" printed on the board.
The other box had nothing but a sticker "3g+32G+9377 21070411" on the one side I could see but on the other side of the board I was surprised to find out that it also is DDR4 ram. It had "2017-02-10 H96-S912-TVBOX(DDR4)-VO.2" printed right on the board.
I assumed this box was DDR3 (it didn't say MAIN(DDR4) on the board like my other one) until I looked at the back side of the card. I guess I assumed wrong. Just a different version of DDR4. It pays to look at both sides of the card.
I hope this helps you out.

[hcardoso483]

Here is a case of pure enlightenment I've been reading this forum and some others and i have been asking me which ddr ver do my box has, some sites say ddr4 others ddr3 and sh*t I'm lost here, but then i read you got both versions of the same box running the same firmware, great all my questions are answered with your post thanks you really enlighted things to me, just one question tho, haw the f**k do i find which kind of memory is my box using i already opened it but all writing is unreadable, I'm going nuts here, please end my suffering

Sent from my SM-N9300 using Tapatalk

[Flash125]

I read somewhere a while ago that you can try unplugging the USB cable then plug it back in. Sometimes this restarts your USB connection. Nothing to lose if it doesn't work.

[Zee]

guys .. i keep on failing at 16% while flashing with usb burning tools... 0x30403003]UBOOT/Partition system/Download buffer/Data tranfer error
any idea whats the solution ?

[pitarrus]

I used aml_7.1_s912_q9377-H96PROPLUS_mac-20170422. Strangely, it reports itself as running Android 6.0.1. Everything mostly works, but it crashes once and a while. I'll try the 20170602 version that Flash125 linked to above.

I used the one I mentioned and it appears on TVBox as Android 7.1

[Rural]

Good to see you got the box flashed...which firmware did you use?

I used aml_7.1_s912_q9377-H96PROPLUS_mac-20170422. Strangely, it reports itself as running Android 6.0.1. Everything mostly works, but it crashes once and a while. I'll try the 20170602 version that Flash125 linked to above.

[Flash125]

I used aml_7.1_s912_q9377-H96PROPLUS_912_mac-20170602 that I found here:

http://www.mediafire.com/file/j56t4udjdw2ccyw/H96pro_Firmware.rar

it runs well either ddr3 or ddr4 (I have 1 of each and both work fine with this firmware)

[pitarrus]

Good to see you got the box flashed...which firmware did you use?

aml_7.1_s912_q9377-H96PROPLUS_mac-20170422