[ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV7A 7.1.2 (DDR3/DDR4 and 9377 Wifi Chipset)

[haydude]

When the box freezes like that, it is likely a power suplly problem. The PS supplied with this unit are cheap and nasty swtiched power supplies. The capacitors burn quite often giving unstable voltage ouput that causes these freezes. Find a quality replacement and all will be fine.

[djthomasgee]

Put the SCV4 image file on the main directory of your computer (C:/) and try to brush the box with USB BT again.

Hi again,

So I've got some news not no good ones.
Today was the first time that Android has started:
Ive used the USB burning tool and choosed force full erase.

The boot animation came and after some minutes the Welcome screen of Android was displayed. I connected with WLAN and began to type my e-mail address for the Google account login. During this the box made a restart and strucked at the android booting screen, but the animation was freezed. After a while I plug power off and then power on again.
Then the old problem is there: I only see the freaktab Bootlogo and the box strucks there again.

I flashed the box again with USB burning tool and choosed the same settings but always only the freaktab logo is displayed and does not change after minutes. No Android Bootanimation!

Slowly I think that the hardware of the box has a problem.

[Pratak]

Dear author, when do you plan to release firmware version 8?

[bakara]

Shit i really need to update this roms.... but when i see so many clones and clones of the clones out there... i get uninspired... :/

I'm sorry but you're wrong, your rom works on all these PCB, The problem is that people do not know how to flash ROMs and Instruction are not good

Today the new power supply arrived. .. no change. Ive installed scv4a agan but the box stucks again at the freaktab boot logo.
I can enter to TWRP but when I change language to german on "welcome screen" of TWRP then twrk doesnt start again and I get a black screen.

try this:
take a USB mobile phone charger (2A) and connect it to the box with a male-male USB cable (as when you're flashing rom) and connects the hdmi cable to the TV
Does it work?
Yes

connection success, but give error for erase bootloader.
please help

When you get this error, mark it "force erase all" and then reset with the reset button, if you back out the error, try several times.
should pass without error!

[georgesat20]

Thanks again my friend for your reply

[Scotdog]

georgesat20 - Last time I had some problems (errors) with USB burn tool. I burned an SD card with SCV4, popped it in the card slot. and waited. It could take 20 mins or more, but eventually the rom started up and all was well. After that, put SCV7A on the same card and do a local ota install.

[georgesat20]

This 7.1.2 rom runs well on my green board H96 Pro + (3/32). I believe the current rom your running is Android 6.0. That one ran fine on my box as well. Hope this helps.


Download SCV4 GREEN PCB IMG:

• DOWNLOAD HERE GREEN PCB SCV4 IMG 7.1.2
• MD5: E17A5C3B8AAE2E5053BC3077E14F874F

Download SCV7A OTA:

• DOWNLOAD HERE SCV7A OTA 7.1.2
• MD5: 920704AF654F78B8CC60A7A2821CE6D7

connection success, but give error for erase bootloader.
please help

[bloptra18]

Weird. 5G speed is much faster than LAN.

[georgesat20]

Thanks for your reply @Scotdog!
I will test it and I will inform.

[Scotdog]

Reply please

This 7.1.2 rom runs well on my green board H96 Pro + (3/32). I believe the current rom your running is Android 6.0. That one ran fine on my box as well. Hope this helps.


Download SCV4 GREEN PCB IMG:

• DOWNLOAD HERE GREEN PCB SCV4 IMG 7.1.2
• MD5: E17A5C3B8AAE2E5053BC3077E14F874F

Download SCV7A OTA:

• DOWNLOAD HERE SCV7A OTA 7.1.2
• MD5: 920704AF654F78B8CC60A7A2821CE6D7

[georgesat20]

I use this ROM

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/alfawise/firmware-roms-ac/624014-rom-alfawise-h96-pro-3-32-and-3-16-scv2-rom-ddr3-only

On my green H96 pro + with chip:
PE029-125F1638
Can I use this ROM: V7 Cumulative OTA

Reply please

[superceleron]

Shit i really need to update this roms.... but when i see so many clones and clones of the clones out there... i get uninspired... :/

[jcplu]

2) For me, the only way is to use AC3 passthru and SPDIF with KODI 17.6. All other combinations don't work (HDMI with KODI, or SPDIF/HDMi with another player).
It was the same before installing Magisk.
Actually, no module and/or Xposed.

[X92-2GB]

Maybe you should have erased boot loader, so custom kernel can load. Never had digital pass through issues with HDMI and SPDIF on any of the SC versions I tested with.

I suggest installing DROID Settings from stock firmware, it will allow further extended display settings.

Also I found issues with Magisk 7.1, ended up using older pre 7.0. You may not see any issues, unless using modules and or xposed.

[jcplu]

4) Magisk 17.1 installed > 3) resolved.
5) minor: there are also, in SCV7A, some translation errors (not present in SCV4) in Audio menu (ie digital sounds) or Display menu (screen position).