[ROM] Android TV (7.1.2) Beelink GT1 (Multi 6255 & 9377 Standard+Ultimate)

[X92-2GB]

Exactly both, initially I edited the file "Vendor 2319 ... 0010.kl" but at some point stopped working, I looked for this alternative that is to change the key in the file "Generic.kl". I also used the terminal to make sure. My Air Mouse is a sikilar to the one of the forum below:

Just an oddity with editing... all you need is one space or invalid character, and you break a config file's function. Had that happen with wifi net config file. Had to use a backup, as everything looks good, but unable to see the error without comparing with a more robust editor.

[tillaz87]

Exactly both, initially I edited the file "Vendor 2319 ... 0010.kl" but at some point stopped working, I looked for this alternative that is to change the key in the file "Generic.kl". I also used the terminal to make sure. My Air Mouse is a sikilar to the one of the forum below:

Attach the .kl you made I will have a look and add it to any future patch

[Novato]

It's using the Generic.kl because it's not recognising the .kl you made for the remote that's what the generic.kl is for its it's a fall back file

Did you set correct permission for the .kl you made?
Did you use the command from terminal to make sure
Vendor_2319_Product_0010 is the correct ID for the remote?

Also what remote are you using?

Exactly both, initially I edited the file "Vendor 2319 ... 0010.kl" but at some point stopped working, I looked for this alternative that is to change the key in the file "Generic.kl". I also used the terminal to make sure. My Air Mouse is a sikilar to the one of the forum below:

[tillaz87]

Thanks for replying again, I've been seeing here and I realized that it was not a good option to change the file "generic.kl", however the seeing that the file "Vendor_2319_Product_0010.kl" "half ghost, even if I delete it, and then go to the "Gamepad Test" app and take the test, it will still be labeled "Vendor_2319_Product_0010.kl still runs there, but not in the" system / usr / layout "folder, so I did not know where to go to run Generic .kl "and it worked. I replaced the "65 F7" key to Print function on the blue Air Mouse button. Anyway I'm going to leave that aside.

It's using the Generic.kl because it's not recognising the .kl you made for the remote that's what the generic.kl is for its it's a fall back file

Did you set correct permission for the .kl you made?
Did you use the command from terminal to make sure
Vendor_2319_Product_0010 is the correct ID for the remote?

Also what remote are you using?

[Novato]

Your not supposed to use that generic.kl as that is what's used globally when the system can't find a .kl file for your device. If you change that other devices without .kl could be messed up

You should read the link on first post it talks all about making .kl for remote and gamepad and editing them.

If you look at the 0001.kl for the sock IR remote you will see some custom action I added at the bottom for launching app drawer, Kodi, youtube etc

These are hard coded in services.jar and framework-res so add more isn't that easy

Thanks for replying again, I've been seeing here and I realized that it was not a good option to change the file "generic.kl", however the seeing that the file "Vendor_2319_Product_0010.kl" "half ghost, even if I delete it, and then go to the "Gamepad Test" app and take the test, it will still be labeled "Vendor_2319_Product_0010.kl still runs there, but not in the" system / usr / layout "folder, so I did not know where to go to run Generic .kl "and it worked. I replaced the "65 F7" key to Print function on the blue Air Mouse button. Anyway I'm going to leave that aside.

[tillaz87]

Hey tillaz87 , about mapping the keys of my Air Mouse, yesterday was a success, but soon after I faced a series of errors and the remote control stopped working a few times.

I was editing the file "Vendor_2319_Product_0010.kl" responsible for the Air Mouse, but nothing made the screen capture work again.

After many attempts I understood that this file could not be what dictated the rules in my Air Mouse, there I tried with "Generic.kl" and it worked. Noob suffers. lol

Now that I know where to edit, I'd like to know if it's possible to map to APPs. For example, Key 62 NETFLIX_APP, Key 63 SIDELOAD_APPS. It is possible?

Your not supposed to use that generic.kl as that is what's used globally when the system can't find a .kl file for your device. If you change that other devices without .kl could be messed up

You should read the link on first post it talks all about making .kl for remote and gamepad and editing them.

If you look at the 0001.kl for the sock IR remote you will see some custom action I added at the bottom for launching app drawer, Kodi, youtube etc

These are hard coded in services.jar and framework-res so add more isn't that easy

[tillaz87]

I have the gt1 standard s/n g912, I would love to install this firmware but I am still on android 6 and he links to the official beelink firmware to update to android 7 are all down, Please help.

The first post does not say you have to update to beelinks android 7 firmware.. that's why I don't link to it what your refering to was a long time ago.

This a completely new rom you just download the rom an burn the image

[tillaz87]

Can not create folders or write files to pens and usb disks ... I think it was already mentioned here ... is there any solution to this?

This is done by Google, as of 5.1 lollipop. You need to root and use es file explorer to write to external storage.

[mft4]

tenta aqui...

https://chinagadgetsreviews.com/down...-ultimate.html

Thank you so much

[Novato]

Hey tillaz87 , about mapping the keys of my Air Mouse, yesterday was a success, but soon after I faced a series of errors and the remote control stopped working a few times.

I was editing the file "Vendor_2319_Product_0010.kl" responsible for the Air Mouse, but nothing made the screen capture work again.

After many attempts I understood that this file could not be what dictated the rules in my Air Mouse, there I tried with "Generic.kl" and it worked. Noob suffers. lol

Now that I know where to edit, I'd like to know if it's possible to map to APPs. For example, Key 62 NETFLIX_APP, Key 63 SIDELOAD_APPS. It is possible?

[Byjaps]

I have the gt1 standard s/n g912, I would love to install this firmware but I am still on android 6 and he links to the official beelink firmware to update to android 7 are all down, Please help.

tenta aqui...

https://chinagadgetsreviews.com/download-latest-android-7-1-2-firmware-for-beelink-gt1-classic-ultimate.html

[mft4]

I have the gt1 standard s/n g912, I would love to install this firmware but I am still on android 6 and he links to the official beelink firmware to update to android 7 are all down, Please help.

[Novato]

Beelink GT1 2G/16G

Well, to know, these gadgets are a mystery inside.

[josephmk]

I'm glad it was helpful. What is your device?

Beelink GT1 2G/16G

[Novato]

This patch fixed my Bluetooth issue on 9377. Thanks Novato and Tillaz87.

I'm glad it was helpful. What is your device?