[ROM] Android TV (7.1.2) Beelink GT1 (Multi 6255 & 9377 Standard+Ultimate)

[Novato]

Have you tried flashing the patch first?

Yes, it resulted in the first error I mentioned, simply bluetooth did not start, I realized that the file * libbt-vendor-qcom.so * has no utility on my device, on the contrary would make Wi-Fi turn off. What I did was erase this delete this file and just keep the "libbt-vendor.so", with that now the bluetooth and wi-fi are work at the same time, however the audio bluetooth is slow and lagging. I posted a question for Magendaz on the topic of M8S Pro, but it has been days since it did not respond there.

[tillaz87]

Hi, thanks for replying once more. Could you do it for me or is it too much work? If it is I'll understand.

Have you tried flashing the patch first?

[Novato]

Both use same firmware base but this uses the newer kernel from the latest build of Shiningworth which users suggested the BT was fixed thats why I removed the patch as it would brake BT if they did fix it via kernel.

I could just included the old boot.img with the BT patch which would guarantee it works like it used to.

Hi, thanks for replying once more. Could you do it for me or is it too much work? If it is I'll understand.

[tillaz87]

I believe that if I use the same libbt-vendor.so file that Magendaz used in its last build Shiningworth the audio is corrected. Too bad I'm going to need to change the system because I can not unpack this type of system. Unless you tell me what prohamap to use. xD

Both use same firmware base but this uses the newer kernel from the latest build of Shiningworth which users suggested the BT was fixed thats why I removed the patch as it would brake BT if they did fix it via kernel.

I could just included the old boot.img with the BT patch which would guarantee it works like it used to.

[Novato]

https://mega.nz/#!JAoQlCxb!2pMZhmjWY...5XpsLRxGenGJEw

Thanks, I'll test this too.

[Novato]

Hi, I've made a little progress, but I think I know how to solve it now. I did the following, returned the libbt-vendor.so file, did the permissions, removed the libbt-vendor-qcom.so file, and rebooted the device. Initially the bluetooth box plugged in but this triggered the wi-fi shut down. I turned on the Wi-Fi again and it worked, the two are connected but the audio got choked. I believe that if I use the same libbt-vendor.so file that Magendaz used in its last build Shiningworth the audio is corrected. Too bad I'm going to need to change the system because I can not unpack this type of system. Unless you tell me what prohamap to use. xD

[tillaz87]

Thanks, I'm testing here but the initial instructions (remove libbt-vendor.so and then rename libbt-vendor-qcom.so) just disabled Bluetooth. I tried to download your fixer but it is no longer available.

https://mega.nz/#!JAoQlCxb!2pMZhmjWYbyIYQSgEvdL4egGZx6XU5XpsLRxGenGJEw

[jotascotch]

How to update 10.6 to latest 10.7 version, without erasing data, apps, etc? I can only find img file.

Nice work @tillaz87!!

[Novato]

Android TV and its apps are mainly built for 320dpi you can change to 240dpi but will see some graphical abnormality.

I already made a BT patch based of that info but are kernel was updated. so not sure if it still needed as my box is AP6255
http://freaktab.com/forum/tv-player-...147#post717147

Thanks, I'm testing here but the initial instructions (remove libbt-vendor.so and then rename libbt-vendor-qcom.so) just disabled Bluetooth. I tried to download your fixer but it is no longer available.

[tillaz87]

Hi tillaz87, congratulations for your effort and hard work over this time with the GT1 and similar hardware devices! A few minutes ago I installed the 10.7 firmware on the device and loved it all. The only thing I want to change and the ratio of pixels per inch (dpi), since my monitor has a 22 "screen, it does not make sense to leave the aspect ratio high.

But I came up with a recurring problem, something I had previously faced with installing the ATV ROM for Vorke Z6. The error itself is related to bluetoothh, and makes Wi-Fi hang up when a Bluetooth device is connected to the Box TV. The Wi-Fi chip on my device is the LMT8830 which is very similar to Qualcom's QCA9377.

I'm not quite sure but maybe it's something similar to what Magendaz has fixed in a test with the Shiningworth All-in-One firmware for us from M8S Pro. My question is whether it's easy to run this or requires a little more habiliity and knowledge to perform the proper repairs. Link where Magendaz describes the error below:

http://freaktab.com/forum/tv-player-...384#post706384

Android TV and its apps are mainly built for 320dpi you can change to 240dpi but will see some graphical abnormality.

I already made a BT patch based of that info but are kernel was updated. so not sure if it still needed as my box is AP6255
http://freaktab.com/forum/tv-player-...147#post717147

[Novato]

Discontinued April 9th 2018, For me this is stable, but no longer have the time for his so moving on from here.


Recant Changes: v10.7 Final release (To be taken as is)

• built Magisk root method in to TWRP (Advanced/Magisk root)
• Fixed TWRP reporting 5.1.1 OS, some zip like xposed fail because of this
• Busybox updated / fixed
• reverted some lib stuff
• Fixed auto frame settings?
• USB Camera fixed?

I will most likely continue to reply in this thread for now.. but will be giving my GT1 to a new owner since I have the shield tv again
maybe I will be back when next gen amlogic boxs come about, if i'm sent one.

Hi tillaz87, congratulations for your effort and hard work over this time with the GT1 and similar hardware devices! A few minutes ago I installed the 10.7 firmware on the device and loved it all. The only thing I want to change and the ratio of pixels per inch (dpi), since my monitor has a 22 "screen, it does not make sense to leave the aspect ratio high.

But I came up with a recurring problem, something I had previously faced with installing the ATV ROM for Vorke Z6. The error itself is related to bluetoothh, and makes Wi-Fi hang up when a Bluetooth device is connected to the Box TV. The Wi-Fi chip on my device is the LMT8830 which is very similar to Qualcom's QCA9377.

I'm not quite sure but maybe it's something similar to what Magendaz has fixed in a test with the Shiningworth All-in-One firmware for us from M8S Pro. My question is whether it's easy to run this or requires a little more habiliity and knowledge to perform the proper repairs. Link where Magendaz describes the error below:

http://freaktab.com/forum/tv-player-...384#post706384

[tillaz87]

I can take a test: I try the 708NO firmware And will your V9 patch work?

No idea the patch rom is totally different to whats here as the patch is based on old buggy beelink firmware

[craser]

I can take a test: I try the 708NO firmware And will your V9 patch work?

[NoOneOth]

flash in twrp [ATTACH]n718761[/ATTACH]






All I can suggest http://freaktab.com/forum/tv-player-...-and-optimized give it a try.






This is deodexd stock apk are not so you might of missed the oat folders from stock

flash in twrp [ATTACH]n718762[/ATTACH]

Thank you!

and once again, thank you for all your hard work and this final release, I'm having a very good experience with it

[tillaz87]

tillaz87 Does this firmware work normally on the Beelink GT1 Ultimate ?? do I install on my beelink GT1 Ultimate?
Excuses, I'm Brazilian and the automatic translation leaves doubts

Yes it should