thanks in advance
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
m8s blue light on but no signal at all
Collapse
X
-
m8s blue light on but no signal at all
hi there, i have an m8s which i tried updating to 5.1.1 lollipop. clearly i must've used the wrong file because now it just does nothing. i still have the blue light come on but no matter what tv i plug it into or what hdmi i use i'm getting nowhere. it will not even connect to my pc so i can use the usb burning tool to try recovery. any idea how i can breathe a bit of life back into this old girl or is she dead as a dodo?
thanks in advanceTags: None
-
Hello @bobfrapples08,
Welcome to Freaktab.
To bring your M8S back to the life you need the PC with USB Burning Tool and a USB A to A Cable.
Also a proper Firmware for it. But first thing first.
USB Burning Tool:
Firmware:
How-To:
FIRMWARE UPGRADE GUIDE FOR AMLOGIC DEVICESWhat you need:AML Burning ToolImage fileHost PCUSB OTG Cable1. You need to download the firmware archive. You should be sure, that using current firmware fits for your device otherwise it could cause harmful consequences.2. Unpack zip ar...
That´s all you need.
Neomode
-
Neomode,, I have `the same issue and have followed your instructions. M8S with blue light and no HDMI signal. I am able to connect to device with A to A cable using the USB burning tool. I am also able to burn the image you provided 100% successfully. I disconnect the device from USB, I insert the power and it does not boot up. I have two devices doing the exact same which has me concerned that I may be doing something wrong despite the successful burn. Can you help ?
Comment
What's Going On
Collapse
There are currently 933 users online. 2 members and 931 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Comment