[ROM] Beelink GT1 / Alfawise S92 Stock & Nano Nexus ROMs (Android 7.1)

[ClarkKent]

I have your August Nano build, that's all that would flash at the time. Other than a factory wipe is there anything else needed to move up to your most recent version?

Yes, a "rolling update". ;-) It's much easier for me, and it has the added benefits of scrubbing bad builds from the server and not breaking links.

[Philbra]

I received my new GT1 Ultimate from GearBest in the mail yesterday, and I've now tested it with this latest ROM. Unfortunately, I found a 1-byte error in the device tree for the 3GB DRAM configuration that will cause a hang after the boot logo. I've corrected the mistake and have done an in-place refresh of all the links from the last build, so now everyone should be downloading new copies with the fix.

This rolling update is only for the 3GB DRAM GT1 Ultimate configuration. All others should be unaffected.

Magendanz, did you already modify the files ?
it seems that there is not any new release.
silent release ?
philippe

I received my new GT1 Ultimate from GearBest in the mail yesterday, and I've now tested it with this latest ROM. Unfortunately, I found a 1-byte error in the device tree for the 3GB DRAM configuration that will cause a hang after the boot logo. I've corrected the mistake and have done an in-place refresh of all the links from the last build, so now everyone should be downloading new copies with the fix.

This rolling update is only for the 3GB DRAM GT1 Ultimate configuration. All others should be unaffected.

[Philbra]

Reboot v.2.1 or rom toolbox ( j.Rummy apps) works well for me. Try those and see?
Otherwise, unplug power use a paperclip to gently depress reset button inside v. small port hole on base panel.
You'll hear and feel a click, apply power hold depressed for ? a "5" count. Should do it.
It's tricky to stay on button and may be easier to poise wall plug just off making connection. Use two hands on box, then seat wallplug with ? elbow, etc.

You can also download “amlogic tv box tool”. It will give several tweaks as for exemple the possibility to reboot in Recovery mode ..... that’ s it !

[ClarkKent]

How do I boot into recovery? I tried using some apps from playstore to perform a reboot into recovery but they don't seem to work. I have installed the 251117 (latest nano version)
Thanks!!!

Reboot v.2.1 or rom toolbox ( j.Rummy apps) works well for me. Try those and see?
Otherwise, unplug power use a paperclip to gently depress reset button inside v. small port hole on base panel.
You'll hear and feel a click, apply power hold depressed for ? a "5" count. Should do it.
It's tricky to stay on button and may be easier to poise wall plug just off making connection. Use two hands on box, then seat wallplug with ? elbow, etc.

[[email protected]]

How do I boot into recovery? I tried using some apps from playstore to perform a reboot into recovery but they don't seem to work. I have installed the 251117 (latest nano version)
Thanks!!!

[Philbra]

Magendanz
yes it is a GT1 Ultimate AX25
and it works very well with your ROM
Philippe

By any chance do you have a GT1 Ultimate with 3GB DRAM?

[Philbra]

What do you mean by same issue? You also had problems downloading the ROMs?

PS: Link to ROMs is online again

No my issue was I bricked my GT1 using the OTA update with this Rom.
i never had any issue with the download of the file
philippe

[ClarkKent]

Guest thanks, I got it. Though I'm not really sure how. I'd like to PM you for clarity on this, and a couple other comments you made.
I'd rather not add any more clutter here, for my friends.

Yeah, I don't think it's a matter of having an account, since I was able to download anonymously using a guest account on a clean PC. It seems that OneDrive is just being flaky.

Remember that there's always the archive site available here: http://freaktab.org/3~f
(Unfortunately, it's much slower.)

[[email protected]]

i had the same issue ... GT1 bricked with boot load error. I could fix it with a new full download via USB with the last stock F/W 707 from beelink.
but instead of push the start after USB connection, I push start before and I made a full erase.
Then I could use the OTA with Magendaz F/W and restart from O

Good luck

Philippe

What do you mean by same issue? You also had problems downloading the ROMs?

PS: Link to ROMs is online again

[[email protected]]

Do you have an account? I believe you have to sign up for access

I have an outlook account. How do I sign up to have access to the ROMs? In the past, I was able to download these ROMs. However, they seem offline now.


PS: Link to ROMs is online again

[Philbra]

@Magendaz
Could you please update the links for the ROMs? They are all broken. Thank you!

i had the same issue ... GT1 bricked with boot load error. I could fix it with a new full download via USB with the last stock F/W 707 from beelink.
but instead of push the start after USB connection, I push start before and I made a full erase.
Then I could use the OTA with Magendaz F/W and restart from O

Good luck

Philippe