If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have downloaded so many roms but they keep giving an error as per the attached.
I have the following rom that works but it keeps getting stuck in bootloop should power be removed: rk3229_6.0_box_MX4V_RTL8723CS_RTL8703BS_SpecTek_fl ash-update_20170502.img
Does anyone know of a rom that works on the V88 Plus and doesn't get stuck in bootloop?
You may only view thumbnails in this gallery.
This gallery has 1 photos.
That firmware your using is the correct one, In Android tool you must erase first then upgrade firmware. If that firmware still failing try this slightly newer firmware https://mega.nz/#!j19WEDTA!XSCGw-El8...wBQX5-rzOPN8s4
Well if your not erasing flash it's probably conflicting with previous /data partition. Always best to erase before flashing. Your supposed to briefly see recovery screen erasing all these partitions before it shows the Android splash screen.
When the light goes from red to blue unplug the USB cable and plug it in with the usual power cord and hdmi you should see the recovery screen erasing the partitions and then it should show the Android splash screen for about 7-10 minutes. This box has slower nand memory so takes awhile the first time it boots.
When the light goes from red to blue unplug the USB cable and plug it in with the usual power cord and hdmi you should see the recovery screen erasing the partitions and then it should show the Android splash screen for about 7-10 minutes. This box has slower nand memory so takes awhile the first time it boots.
It will power off then correct? I read on another forum that you need to go into apps and change the default voice assist app to none to stop the bootloop.. They said that this needs to be done on the first boot.
When the flashing in complete (after the firmware check goes to %100) it will restart the box (blue led) unplug the USB cable when that happens. I'm not aware of that voice assist problem, the latest firmware is pretty stable on this box.
Well I re flashed this afternoon so let's see how long it lasts until it bootloop again then I will try the new image and use exactly the way you said.
That firmware your using is the correct one, In Android tool you must erase first then upgrade firmware. If that firmware still failing try this slightly newer firmware https://mega.nz/#!j19WEDTA!XSCGw-El8...wBQX5-rzOPN8s4
I used this tonight and it works great. Thank you. Amazing how poor wifi is on this box. 100mb ethernet and 3mb wifi. But keeping it wired and with android 6 it will do as a spare box. Your efforts are appreciated.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment