Tanix TX92 Amlogic S912 CPU Android 7.1 OS 2.4G / 5G WiFi 1000M LAN BT4.1

[gonzametal]

For which model are you talking about and what doesn't work right for you?

Sent from my ONEPLUS A3003 using Tapatalk

HI. I have 3/32. I have the box a few days ago. No problems so far. But I want to know if upgrading to another firmware will get a better experience..
At the moment can not upgrade Kodi to latest.

[RASTAVIPER]

So, is there any firmware for this box, that make it run as it should???? The official one is 20171230. Should I upgrade to this? May I use an alternative rom to get it work without problems?

For which model are you talking about and what doesn't work right for you?

Sent from my ONEPLUS A3003 using Tapatalk

[soldiaz]

Anyone knows wether I can crossflah Firmware to x92 ??

[gonzametal]

So, is there any firmware for this box, that make it run as it should???? The official one is 20171230. Should I upgrade to this? May I use an alternative rom to get it work without problems?

[larryman]

Thanks maga _man

[maga_man]

Hello Everyone,

I have patiently read all posts in this persistent 27-page thread, found two posts have never been answered. This is the first post and it's similar to my question. It will be greatly appreciated if you could kindly give me any advises about the build versions of Tanix TX92.

I've received today my Tanix TX92 3G/32G, which the vendor insisted it is a DDR4 version. So upon Inpection of the contents i noticed a label affixed underneath the tv box Says "TX92-LP". Do you have any Idea about the differences of build versions "TX92-A", "TX 92-B" & "TX92-LP" ?

And Tanix customer contact doesn't reply to my email inquiries, other than an auto reply email.

THANKS

Larry

TX92 2Gb DDR3 / 16Gb
TX92-LP 3Gb LPDDR3 / 32Gb
TX92-A 3Gb DDR4 / 32Gb
TX92-B 3Gb DDR4 / 64Gb

[larryman]

Ok, I received today this tv box, everything works fine, is there a way to block the ads' in youtube application?
And btw, is there any way to check if I really have DDR4 RAM?

This is the #2 post i found in this thread which could help me as well.

Thanks

Larry

[larryman]

I notice that Vorke has a sticker TX92 A on the pcb, while Tanix has the sticker TX92 B.

I assume the letter determines the grade of the components.

Anyway, any further news/experience on either the Vorke or the Tanix?

I was ready to place an order this morning for the Magicsee Iron+ when I stumbled on this box, and which looks interesting to me, if the quality and firmware is performing well.

Hello Everyone,

I have patiently read all posts in this persistent 27-page thread, found two posts have never been answered. This is the first post and it's similar to my question. It will be greatly appreciated if you could kindly give me any advises about the build versions of Tanix TX92.

I've received today my Tanix TX92 3G/32G, which the vendor insisted it is a DDR4 version. So upon Inpection of the contents i noticed a label affixed underneath the tv box Says "TX92-LP". Do you have any Idea about the differences of build versions "TX92-A", "TX 92-B" & "TX92-LP" ?

And Tanix customer contact doesn't reply to my email inquiries, other than an auto reply email.

THANKS

Larry

[VEGETA927]

Maga_man, IAM very happy that you were able to get your TV box working, that's great news, Tanix as a company isn't off the hook for there lack of professionalism. I would love to see a fix for the 2gb version.

[maga_man]

Please help!!! My TX92 is bricked. It doesn't start. No lcd display. Please help!!

UPDATE: SOLVED!! I MANAGED TO UNBRICK THE DEVICE. THANKS TO THE POST BELOW!

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/mecool/719769-vorke-z6-plus-sd-card-firmware-update-20180126-sd

Some minor things I did:
Since I run Windows 10, USB burning tool didn't work at first. Then I changed the compatibility to Windows 7 and finally it worked. Also, I used the same Vorke Z6 Plus Firmware linked in the post. I tried with Tanix TX92 firmware given by their official website but it didn't work.

My box had many problems with my box with the original firmware (20180410) that came with the box. After using the Vorke firmware it's runs flawlessly.
So many thanks to Sol-geek-newbie for saving my box/life!

[VEGETA927]

RASTAVIPER, I am happy that your TV box works sadly the majority of people buying any Tanix TV boxes have issues, Just go check on there Facebook page, every one of there TV boxes is shipped with errors and constant issues/Headaches. Go check gearbest and see how it has great reviews yet in the cons section people list the problems, problems that aren't being fixed at all YOUTUBE Tanix problems and you will see for yourself the company is 100% shipping defective products but again I am happy you have a perfectly working TV box I and the rest of the people in this thread with issues want one too. They built your TV box perfect, they just chose to not build the other million TV boxes perfect, get a new firmware that might fix a couple issues only to have new issues come up lol. Its not just Tanix its also the Vorke box that also has issues and again is built by Tanix

Tanix Box 4 months ago

Correction, Tanix is the original manufacturer. of the Vorke Z6 TV Box.

Tanix on youtube posted they are the original Manufacturer for the Vorke TV box.

In the end I truly hope Tanix fixes the issues, as I would love to have a working TV box like you RASTAVIPER.

[RASTAVIPER]

Same f###ing Problem. I have the 3GB/32GB version. And it works like a 1 gb quad core box. What a joke! Also, Everytime I shut down the box using air mouse it restarts. Everytime. I have to use the physical button to shut down the box and even that some times doesn't work.

I'm running the April 2018 firmware (firmware version 20180410) that came with the box. What firmware are you running? Did you update the firmware?

Never had any of the issues that you are mentioning with my 3/32gb.
And I never turn it off.
I have tried 2-3 air mouses with no issues.
December 2017 firmware

Sent from my ONEPLUS A3003 using Tapatalk

[maga_man]

looks like this firmware was for 2GB version

Now what should I do?

[JoseM]

Please help!!! My TX92 is bricked. It doesn't start. No lcd display. Please help!!

I updated with the firmware tanix facebook page gave me.

There was no power interruptions during the firmware update process!!

This is the firmware.
20180526 (BETA but stable): https://drive.google.com/file/d/1tQr...nvIfNoYId/view

I put the .zip file in USB drive and opened update&backup app then selected the .zip file and pressed update.

It then restarted and showed that it is updating. After it finished updating it restarted again and there was no display. The lcd display on the box is not showing anything and nothing is happening. Please help!!

looks like this firmware was for 2GB version

[maga_man]

Please help!!! My TX92 is bricked. It doesn't start. No lcd display. Please help!!

I updated with the firmware tanix facebook page gave me.

There was no power interruptions during the firmware update process!!

This is the firmware.
20180526 (BETA but stable): https://drive.google.com/file/d/1tQr...nvIfNoYId/view

I put the .zip file in USB drive and opened update&backup app then selected the .zip file and pressed update.

It then restarted and showed that it is updating. After it finished updating it restarted again and there was no display. The lcd display on the box is not showing anything and nothing is happening. Please help!!

UPDATE: SOLVED!! I MANAGED TO UNBRICK THE DEVICE. THANKS TO THE POST BELOW!

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/mecool/719769-vorke-z6-plus-sd-card-firmware-update-20180126-sd

Some minor things I did:
Since I run Windows 10, USB burning tool didn't work at first. Then I changed the compatibility to Windows 7 and finally it worked. Also, I used the same Vorke Z6 Plus Firmware linked in the post. I tried with Tanix TX92 firmware given by their official website but it didn't work.

My box had many problems with my box with the original firmware (20180410) that came with the box. After using the Vorke firmware it's runs flawlessly.
So many thanks to Sol-geek-newbie for saving my box/life!