SuperSU can kill your H96 Pro Plus

[mujeebas]

Here is recent progress with SCV4-Test1 image
waiting for expert advice

[ch3mn3y]

Try with pushing reset button for a whole time Burning Tool is writing image to Box's memory. Someone did it that way and it worked.

[mujeebas]

Already Tried that by the way am i choosing the right firmware ?

[ch3mn3y]

Do You use image for Green or Blue? If Blue than it's right one as You have Blue PCB.

[mujeebas]

I Use for Blue PCB. Then what can be the cause of no success did i erase everything badly?
What is TWRP?

[ch3mn3y]

TWRP is recovery with full touch support and nice GUI. It lets to You to flash roms and mods, make backups of chosen partitions and than restore it, and some more functions.
However it won't let You flash image with firmware for H96.

However if You want to try I have TWRP backup of clean stock for S32-V6. You can restore it on Your Box and it may work.

[mujeebas]

I will but need help how to do that

[ch3mn3y]

1. Download this: https://mega.nz/#!wrhyhSgR!LDLZSp2eM...zWTC7Y5yg7sPSA
2. Unpack it (it's 7 zip archive) and copy TWRP folder to You Box Internal Memory, SDcard or UBS flash drive.
3. Copy recovery.img to SDcard.
4. Boot to TWRP:
   1. Disconnect power cord.
   2. Start pushing reset button with pin.
   3. Connect power.
   4. Keep pushing reset for 5 more seconds or till You see TWRP logo.
5. In TWRP choose Resotre "tile (right one in 2nd row).
6. Than choose "Select sotrage" and choose where You put TWRP folder - Internam memory, DScard or USB drive.
   If You'd chosen right memory than there should be available backup named Stock 7.1.2 [2017-12-10--11-14-17].
7. Choose it and than select or available partitions (boot, cache, userdata, system, recovery and logo) and Swipe to the right.
8. After some time it will finish, so choose Reboot System option and wait for Box to boot (if it does).

Just read the other thread. Congratulations for fixing You Box

[5kong'svlog]

1. Download this: https://mega.nz/#!wrhyhSgR!LDLZSp2eM...zWTC7Y5yg7sPSA
2. Unpack it (it's 7 zip archive) and copy TWRP folder to You Box Internal Memory, SDcard or UBS flash drive.
3. Copy recovery.img to SDcard.
4. Boot to TWRP:
   1. Disconnect power cord.
   2. Start pushing reset button with pin.
   3. Connect power.
   4. Keep pushing reset for 5 more seconds or till You see TWRP logo.
5. In TWRP choose Resotre "tile (right one in 2nd row).
6. Than choose "Select sotrage" and choose where You put TWRP folder - Internam memory, DScard or USB drive.
   If You'd chosen right memory than there should be available backup named Stock 7.1.2 [2017-12-10--11-14-17].
7. Choose it and than select or available partitions (boot, cache, userdata, system, recovery and logo) and Swipe to the right.
8. After some time it will finish, so choose Reboot System option and wait for Box to boot (if it does).

Just read the other thread. Congratulations for fixing You Box

can you give me
an original rom link, my box is same to mujeebas , i have already white the SCV4-Test1 img successful. but that is not i whated.
i what to this rom ,please read this:http://freaktab.com/forum/tv-player-...n-original-rom

[mujeebas]

https://mega.nz/#F!8qhRRaYJ!2ZA3VLjv...TF27g!prxFnCRA Here it is.
Select the Top one.