If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
TX7 Android 7.1 Amlogic S905X Quad Core 2/32gb Dual Band WiFi 2.4GHz + 5GHz Bluetooth 4.0
TX7 Android 7.1 Amlogic S905X Quad Core 2/32gb Dual Band WiFi 2.4GHz + 5GHz Bluetooth 4.0
- Swift and stable system: outfitted with the highly customized Android 7.1 system, you get swift and stable system operations
- 2.4GHz + 5.0GHz dual band WiFi will simply connect to any network with any security type and stream your favorite content without the hassles of wires
- Amlogic S905X quad core CPU is rapid and stable which can give you a high-speed feedback and smooth response
Well a surprise of the good kind
Appears to be no surprises(Bad ones)
Looking better than OK
Tanix Startup wizard easy setup all good.
Connection to WiFi, Google setup and installed Apps smooth.
Upper Notification and Lower Task bar available.
Option to Root with access in setting enable/disable, Another story to hide safetynet...
UI Appears Zippy and No B/S
Remote OK for IR
BT Detects Headset, Speakers, TV about 5 meters distance.
Temps also Good...Idle 40~50c Streaming YT 50~55c no problems here as yet
Lets have a look see:
UI and Installed Apps
System Info
DRM Info: L3
Ram and Storage Truth
CPU-Z
Antutu, Noticed the sound is Weird or Dead of late with A7
Same Hardware as my older stock TX7 but with Android 7.1
Where on Earth is this Firmware Update ?
I emailed Tanix as it's not on their website Firmware Downloads.
Response NOTHING. 2 weeks ago.
Same Hardware as my older stock TX7 but with Android 7.1
Where on Earth is this Firmware Update ?
I emailed Tanix as it's not on their website Firmware Downloads.
Response NOTHING. 2 weeks ago.
Greatly Appreciated. I will give this a try and report back.
By the way is there a version of Amlogic Burning Tool you may have used with this ?
I'll give it a go with what i have or chase up Google for current version. Thank You again
Thx for sharing It is first FW what is work on my box (qbox s905x p212 or whatever it is LoL) try nexbox fw etc... Always something not work wifi, bluetooth remote power on.... After little modding get fully work rtl8723bs at last
Thx for sharing It is first FW what is work on my box (qbox s905x p212 or whatever it is LoL) try nexbox fw etc... Always something not work wifi, bluetooth remote power on.... After little modding get fully work rtl8723bs at last
jas7o can you elaborate on the modding to get WiFi module to work? Trying this android 7.1.2 on the Le Potato S905x-cc and would like to learn how you did it. Appreciate the help.
As I good remembered just delete some frimeware file and modules then use nexbox a95x FW Android 7.1 files. Download flashable zip what I make and have a look inside zip what files I deleted and what files replace /META-INF/com/google/android/updater-script
My zip is using NEXBOX-A95X_S905X_7.1_8723bs_8g2g_171120preview modules , try flash it mabe gonna work for you if not find frimeware for you box where Bt wifi work and replace files inside zip and try again I spent week to get it work. good luck
(Ignore lines commented with # inside update script)
As I good remembered just delete some frimeware file and modules then use nexbox a95x FW Android 7.1 files. Download flashable zip what I make and have a look inside zip what files I deleted and what files replace /META-INF/com/google/android/updater-script
My zip is using NEXBOX-A95X_S905X_7.1_8723bs_8g2g_171120preview modules , try flash it mabe gonna work for you if not find frimeware for you box where Bt wifi work and replace files inside zip and try again I spent week to get it work. good luck
(Ignore lines commented with # inside update script)
Many thanks jas7o I will try to follow your steps with Le Potato.
My TX7 won't start anymore, only red light after power up, no reaction to remote, seems bricked.
I tried to re-flash the firmware with version I found online - "HQYG-TX7-nikodi-20180104.img" via "USB_Burning_Tool_v2.1.6".
I only get to 9% progress and flashing always ends with following error:
[Err]--failed:Verify Failed with sha1sum, origin sum "78813f7b79d754181bbef75515124fa52fbc341a" != gen sum "404ed59b1635e7be0ece41a9dd326675feaa0550"
[HUB9-1][Err]--[0x30405004]UBOOT/Partition _aml_dtb/Verify patition/Error result
From the error message it seems that the firmware checksum is not correct for my device.
Could anyone please send me some other (maybe older) full size firmware for Tanix TX7 2/32GB S905X for flashing ?
I'm asking because the link posted in this thread by user bodrick is now dead.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment