[ROM] Tanix TX9 Pro / Vorke Z6 Plus - based on Magendanz´s Vorke Z6 / Tanix TX92 Stock & Nano Nexus ROMs (Android 7.1)

[Jancales]

Yes, mine is Z6 Plus. Can't find the original link.. I re-upload the file. I only use it for couple of days and after that i switched back to my old box. Just because i felt that the wireless is not up to my standard. Any good news yet?

MULTI_VorkeZ6PlusBASED_ATV10.6_upd.img.7z
https://uptobox.com/niquty51c86c

Thanks for the fast reply.

Since you say that the display doesn't work, I take it this is not the latest Magendanz ATV as posted in this thread, because that one has the display working.

I had hoped that you would have used it a bit longer than a few days, as I'm trying to get some positive feedback on what rom works well on the Z6 plus, before i gonna flash it.

The display is not really important for me, but I don't see any sense in replacing stock firmware with a custom rom that also has issues.

Anyone who has some positive experience with one rom or the other, please let me know.

[kozekz]

Yes, mine is Z6 Plus. Can't find the original link.. I re-upload the file. I only use it for couple of days and after that i switched back to my old box. Just because i felt that the wireless is not up to my standard. Any good news yet?

MULTI_VorkeZ6PlusBASED_ATV10.6_upd.img.7z

https://uptobox.com/niquty51c86c

[Jancales]

I'm using latest firmware 6/6/2018, the videos still freeze occasionally. Accept from that i felt the 5Ghz wireless is bit slow, or it's signal is not strong compare to my Telos S95. I still need to use LAN to watch really big size movies. If they could fix the freeze, this box would be almost perfect to me. Most i read they mentioned about heated hardware. I don't know

Anyways, i decided to test this ROM last night. Though i lost some of the cool features, like the front screen panel. It's finally work again. I can watch my movie without freezing. So happy right now, i really thought it would go wasted this box.

Will update if i know more. Still not getting use to ATV, currently learning.

Much thanks to creator and TS.

Hi Kozekz, when you say you lost the display, I assume you have a Z6 Plus.

Which ROM exactly did you use, and after 2 months are you still happy with the result?

Any update on your experience will be much appreciated

[syked69]

latest Magendanz ATV roms based on:

Tanix TX9 Pro

https://uptobox.com/42nashn0d9wv

Vorke Z6 Plus

https://uptobox.com/pg681zj0iyz2

Hi,

Is there any chance you can create updated versions of these that use the latest Tanix TX9 firmware (2018-02-05) or explain how I can update the existing one to latest firmware.

[kozekz]

I'm using latest firmware 6/6/2018, the videos still freeze occasionally. Accept from that i felt the 5Ghz wireless is bit slow, or it's signal is not strong compare to my Telos S95. I still need to use LAN to watch really big size movies. If they could fix the freeze, this box would be almost perfect to me. Most i read they mentioned about heated hardware. I don't know

Anyways, i decided to test this ROM last night. Though i lost some of the cool features, like the front screen panel. It's finally work again. I can watch my movie without freezing. So happy right now, i really thought it would go wasted this box.

Will update if i know more. Still not getting use to ATV, currently learning.

Much thanks to creator and TS.

[syked69]

latest Magendanz non ATV roms based on:

Vorke Z6 Plus (nano)

https://uptobox.com/g1nej00gjblr

Vorke Z6 Plus (stock)

https://uptobox.com/yyx8jo83xtam

Tanix TX9 Pro (nano)

https://uptobox.com/9zh7p0sfwqo3

Tanix TX9 Pro (stock)

https://uptobox.com/9wp76etd2z7v

ATV versions will follow soon

This Nano version for the TX9 Pro is beautiful. Works really well and after trying so many others, this is the one I found to be most stable. Good job to all involved

[papla83]

Hi Alianato and thanks for the support about the tx9pro.

Can you repost ATV version or make a update of your nonATV version in ATV ?

Because i desepear to found an ATV rom for this device.

Thanks by advance.

[kain75]

sorry but I no longer have that version

Ok gracias no hay problema

Ok thank you not problem

[Alianato]

Podrias subir de nuevo esta version y de ser posible para OTA.

Muchas gracias por tu esfuerzo y trabajo.

You could upload this version again and if possible for OTA.

Thank you very much for your effort and work Alianato

sorry but I no longer have that version

[zelder]

I tried installing this with usb boot card maker with usb drive. it only boots into recovery. tried install from udisk, but couldn`t find it.

I`ve also installed windows 10 on my MacBook pro and used a usb/c to usb cable to use burning tool, but device wont show. What can I do... please help

[kain75]

After 1 week of use Magendanz rom in Vorke z6 plus a lot of crush begins and also freezing screens....I can use the device just after I take the AC plug from device! I believe something is not ok.....Other people have the same simptoms?

Tengo el mismo problema con la version de Stock al usarlo despues de conectar a la anergia, pero si dejo pasar un rato funciona correctamente es un error de hardware o software?


I have the same problem with the version of Stock when using it after connecting to the anergy, but if I let it happen for a while, is it a hardware or software error?

[kain75]

build from Vorke Z6 Plus stock and based on Magendanz ATV stock version

https://uptobox.com/z83pl10xye4o

Podrias subir de nuevo esta version y de ser posible para OTA.

Muchas gracias por tu esfuerzo y trabajo.

You could upload this version again and if possible for OTA.

Thank you very much for your effort and work Alianato

[avshmu]

Having read most of the posts related to the Tanix TX92, I'm yet to understand which is the latest ROM compatible with the device...
I am currently running the stock ROM from Tanix, designated as TX92-20171230.
Any help?

[Luca]

you must install zip via twrp, I believe I installed SuperSU v2.82 http://www.supersu.com/download

perhaps installing the zip via the "about" in "settings" may also work, from what I recall the result is a boot into recovery

Perfect, i try

[Luca]

when to make a box work we need to check motherboard voltage something must be fundamentally wrong

Of Course..