If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Cube U65GT in brick mode - Help needed for flashing
Cube U65GT in brick mode - Help needed for flashing
Good evening,
I have this (now good old) tablet which is in brick mode. So nothing is displayed on the screen but Windows still sees it in some way.
So I tried to flash it using SP Flashtools 3.1344. At the end of the process, I get the error message : BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054) and [EMI] Obtain DRAM Failed!
In the list of item to flash, Preloader is in red. That could be the problem but I don't know how to solve this and how I can go one step further.
I have this (now good old) tablet which is in brick mode. So nothing is displayed on the screen but Windows still sees it in some way.
So I tried to flash it using SP Flashtools 3.1344. At the end of the process, I get the error message : BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054) and [EMI] Obtain DRAM Failed!
In the list of item to flash, Preloader is in red. That could be the problem but I don't know how to solve this and how I can go one step further.
Any help is welcome.
Thanks,
wile_e
Hi ,
did you tried a higher Version of SPFT , did you flashed a wrong Preloader before ,
always uncheck Preloader before flash if not sure if it is the same , good luck
I tried boot 1.0 dated 28 May 2014 with SP Flash Tool 3.1344 and 5.1628. No success. Th latest error messages are S_DA_EMMC_FLASH_NOT_FOUND, _ BROM_ERROR : S_BROM_CMD_STARTCMD_FAIL & Cannot pass bootrom start via USB cable
I tried boot 1.0 dated 28 May 2014 with SP Flash Tool 3.1344 and 5.1628. No success. Th latest error messages are S_DA_EMMC_FLASH_NOT_FOUND, _ BROM_ERROR : S_BROM_CMD_STARTCMD_FAIL & Cannot pass bootrom start via USB cable
Hello,
no, no good news. I have tried all combinations of SP Flash Tool 3 & 5 with flash 1.0, 1.7 and 1.8 and I have not been able to start the tablet. I have no clue about any other possibilities and I am thinking of buying a new tablet. It won't be a Cube one.
Hello,
no, no good news. I have tried all combinations of SP Flash Tool 3 & 5 with flash 1.0, 1.7 and 1.8 and I have not been able to start the tablet. I have no clue about any other possibilities and I am thinking of buying a new tablet. It won't be a Cube one.
Hi ,
i am sure it can be unbricked , but have not the knowledge , if the "preloader" is red , it is
the wrong one , i think , u have flashed NO or wrong "preloader" , try to flash orginal Rom
with the "preloader" that comes with it , otherwise it can not go on with flashing the Rom .
did you use the "download Mode" of SPFT , for flashing Rom , is this correct ??? ,
i have a CubeT7 and they never made any Updates to a higher Version then 4.4 ,
a shame , the worst was , they not even used orginal Android they used YunOS ,
fake chinese Android , i shall never ever buy a Cube again , even if the Quality of
I don't have the knowledge either. I will give it another try when I have some time. But I really have a lack of free time at the moment. And I will sure buy another one (maybe a Huawei M3) next month.
I don't have the knowledge either. I will give it another try when I have some time. But I really have a lack of free time at the moment. And I will sure buy another one (maybe a Huawei M3) next month.
Hi ,
any results ??? , try to flash your Stockrom back with "Preloader" checked , was the
"Preloader" checked while first Time , maybe you flashed wrong "Preloader" , small
Hint for new MTK flashes , always uncheck Preloader , wrong = brick ,
somewhere here is a longer Thread about your Device , maybe you can find helpful
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment