MECOOL KM9 Android TV Voice Remote Amlogic S905X2 A8.1 4/32 Dual Wifi Fast lan BT4.1

[clarkss12]

Progress!! finally after about 10 attempts, got it to install successfully, but the version that worked, isn't compatible with my remote (non voice remote) can't get past the scanning screen.

If you have an Android phone, use that to connect to the Bluetooth on your box, it may work. Also, try different IR remotes to see if it works. I have an IR remote for an older box that I have had for years, and it works like a charm.

[SJMoore]

Progress!! finally after about 10 attempts, got it to install successfully, but the version that worked, isn't compatible with my remote (non voice remote) can't get past the scanning screen.

[clarkss12]

Thanks Clark, still not working, now stops at 10% '[10:32:50 919][HUB1-3][Err]--[0x30403003]UBOOT/Partition logo/Download buffer/Data tranfer error'. ughh!

Strange, this is one of the easiest boxes that I have for burning new firmware's. I don't use the USB 2 port on my computer, because it does not supply enough power. I use a powered HUB, that is connected to a rear USB port on my computer.

I have swapped multiple firmware's, on this device, the only one that won't install for me is the GT1 mini port from Xannytech.

So, try a different USB port on your computer. Also try a different firmware.

[SJMoore]

Thanks Clark, still not working, now stops at 10% '[10:32:50 919][HUB1-3][Err]--[0x30403003]UBOOT/Partition logo/Download buffer/Data tranfer error'. ughh!

[clarkss12]

Tried that also, no change, stops at 3% everytime, tried 3 Rom's as well, 2 from Magendanz and then tried to put the stock back in, no luck!

You HAVE to use the USB Burning Tool version, 2.1.6.8, otherwise it will not install. I am talking from experience..........

[SJMoore]

Tried that also, no change, stops at 3% everytime, tried 3 Rom's as well, 2 from Magendanz and then tried to put the stock back in, no luck!

[trebor]

When you get error just unplug and replug usb, Don't stop the burn:

Also helps to have no other USB device plugged into your PC while Burning just the cable and box no keyboard mouse,

[SJMoore]

Tried again, have blue light when plugged into pc via usb, ran the Burner, now only gets to 3% and a 'Romcode/B12_Boot stage error.' tried different configurations, no joy!

[SJMoore]

Help!! Tried installing Magendanz's ATV ROM using USB Burning ROM 2.1.6, program stuck at 67%, tried 3 times, now won't power on, no light, nothing.

[Agronur]

this box rom have issues. try magendanz nexus roms. work well.. i asked to aliexpress seller, will a new rom come? they answer we dont know.

[SJMoore]

This box is total trash.
It's a pain in the ahs to install apps from USB.
And installing apps from file linked is darn too slow.

I didn't have any issues installing from usb or Filelinked, pretty fast!
getting them to run properly? that's another matter.

[panchovilla]

This box is total trash.
It's a pain in the ahs to install apps from USB.
And installing apps from file linked is darn too slow.

[SJMoore]

Have you tried Magendanz's ATV ROM??

No, not yet, I was looking at those.

[clarkss12]

Can't wake it up from sleep mode, have to unplug and reboot, remote doesn't function properly (can't highlight all the menu tabs, and have to use a mouse)
wifi randomly disconnects, and Smart iptv channel guide doesn't function. plus the launcher is ugly!

Have you tried Magendanz's ATV ROM??

[SJMoore]

What problems are you having?

Can't wake it up from sleep mode, have to unplug and reboot, remote doesn't function properly (can't highlight all the menu tabs, and have to use a mouse)
wifi randomly disconnects, and Smart iptv channel guide doesn't function. plus the launcher is ugly!