H96 MAX X2 Amlogic S905X2 Android 8.1 4/32GB Dual Band WiFi Fast LAN BT

[Shawncck]

Sorry for my mistake ...
The eMMC is the chip on the left bottom of the heat sink on your photo!
Regards

Hi are you able to point out on the pic to me?
I am not sure where.

[gatos814]

Hi here is the circuit pic.

Sorry for my mistake ...
The eMMC is the chip on the left bottom of the heat sink on your photo!
Regards

[gatos814]

U mean I need short another 2 pin? I did post the pic. U know which one is the eMMC?

Sorry.. no!
I say it might...!
Try to speak with the other guy to see if you're having the same eMMC or not and then you'll have your answer!
Good luck!

[Shawncck]

The other tv box has another ddr so it might have and another eMMC!
So i want to say that maybe needs other 2 pins to do the business!

U mean I need short another 2 pin? I did post the pic. U know which one is the eMMC?

[gatos814]

The other tv box has another ddr so it might have and another eMMC!
So i want to say that maybe needs other 2 pins to do the business!

[Shawncck]

he has been flashing successfully earlier. He decided to restore oreo backup over pie. His bootloader has got cleaned so its not being detected. Only nand pin shorting method might work for him which apparently loads an internal failsafe bootloader but the guy who has performed this has not responded till now. basically what i understand is, you plug the box to pc while keeping usb tool on, and with a screw driver, short the pins shown in the picture. that means connect them temporarily with metal and the box gets detected in 5 seconds. but his box light is also not working and that is a very bad sign. in all short pin videos, box light is working already.

I did what was supposed to do. Load burning tools on, plug usb to pc. Then short the pins. But my light not lighted and does not get detected. And you are right, no light at all could means a gone case. I just want to get clarification for someone who has bricked before. I want to see if even though bricked, is there light on their box. Mine is totally off.

[romcrazy]

If it's not then something's happening with your tv box!
If it's something yellow then the drivers is not properly installed!

he has been flashing successfully earlier. He decided to restore oreo backup over pie. His bootloader has got cleaned so its not being detected. Only nand pin shorting method might work for him which apparently loads an internal failsafe bootloader but the guy who has performed this has not responded till now. basically what i understand is, you plug the box to pc while keeping usb tool on, and with a screw driver, short the pins shown in the picture. that means connect them temporarily with metal and the box gets detected in 5 seconds. but his box light is also not working and that is a very bad sign. in all short pin videos, box light is working already.

[gatos814]

My device didnt show the android box. Means not detected right. The power led is not lighted.

If it's not then something's happening with your tv box!
If it's something yellow then the drivers is not properly installed!

[Shawncck]

Look on device manager!

My device didnt show the android box. Means not detected right. The power led is not lighted.

[gatos814]

I try to short that w a test pen, But still it does not light up. The power is working fine. What else could be the problem. Previously I plugged into PC and was able to detect in the burning tools. Now no response from burning tools. Any way to see if PC detect it?

Look on device manager!

[Shawncck]

Looks like someone in this very thread has already done it. Take his help. He has given pictures for shorting also.

https://forum.freaktab.com/forum/tv-...680#post774680

I try to short that w a test pen, But still it does not light up. The power is working fine. What else could be the problem. Previously I plugged into PC and was able to detect in the burning tools. Now no response from burning tools. Any way to see if PC detect it?

[Shawncck]

picked up this "H96 MAX X2" off of amazon recently and I've only been able to find one firmware that has worked on the device

I found the firmware here "aml_s905x2_H96Max_4g_mac_wifi_lpddr3_20190305" ; Other link to firmware for reference here

Silkscreen on the actual board say:

• s70-905x2-v3
• 2019-02-18

Images that havent worked:

• X96Max_V311_4G_190302_to_H96MaxX2
• X96Max_V311_4G_190302
• H96_Max_X2_s905x2_4g_20190114
• XTMOD_GT1MINI_1.0_PUBLIC_to_aml_s905x2_H96MaxX2_4g-Multi-port hellish mixture
• S905X2.HK1_PRO_AP6330_100M_8.1.2019.01.02.13.58
• aml_s905x2_X2_tubi_4g_mac_wifi_20181117
• u215.T10_PRO_4G_AP6330_100M_8.1.2019.02.20.17.02

At one point I bricked the device but I was able to short out the nand and flash it

Nand pins here

Pic's of board

https://imgur.com/a/x5tVQ0a

Does anyone know what other images I can use ?

Hi Can i check w u how do u unbricked your box? My box have no power light on after I restore orea on pie using twrp. After reboot then the power do not light up. I suspect i bricked the box. I follow your pic to short the board but still the light do not appear. How do u make your box work again. Thanks

[Lapis]

Is this Android 9 firmware working well also on 2/16 GB version?

[romcrazy]

Hi here is the circuit pic.

Looks like someone in this very thread has already done it. Take his help. He has given pictures for shorting also.

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905x2/750345-h96-max-x2-amlogic-s905x2-android-8-1-4-32gb-dual-band-wifi-fast-lan-bt?p=774680#post774680

[Shawncck]

Post the picture. But dont get your hopes up. I have no idea how you have found unlimited ways to destroy your box. I have been flashing stuff for 7 years, I have broken 2 phones in frustration but always I found a way.

Hi here is the circuit pic.