A95X Max TV Box - Amlogic S905X2 A8.1 4/64 ROM Dual WiFi Gig Lan BT4.2 + Support 2.5inch SSD / HDD

[bergamesk]

Tip;press "HELP" button and open the KODI!

[bergamesk]

Can I use on this box another launcher ? This stock is brutal.

Hi,mostly lot of Launchers does not work/support with this box!
I'v tried couple of them and all failed!
So I'v leave it default launcher right now

[bergamesk]

I asked:



The lack of response to this question perhaps indicates 1) everyone is on vacation, 2) the question doesn't make sense, or 3) it's a silly question.

But anyway, let me try again:

Has anyone tried to connect this box to a PC using a Type-A male-to-male USB cable?

__________________________________

I tried to flash TWRP (link found here: https://androidpctv.com/tutorial-ins...tvbox-amlogic/) with the stock recovery program, but stock recovery gave me an error with TWRP. So I found an app called Flashify which did flash this TWRP replacing stock recovery, but then I couldn't boot to recovery, finally I flashed the original stock recovery I'd backed up and I could boot to stock recovery again. Presumably, that means the TWRP doesn't work with the A95X MAX.

My simple answer;NO!
it wont connected,and I'v tried two times and failed,so this Box doesnt support PC connection!

I'v used many Boxes before and some of Boxes does connected successfully and some of them does not

Note;I'v connected USB3.0(Male-Male)cable to my Desktop PC(Windows7) and connected to my Monitor HDMI cable as well
so it does not work!

And this Box is not "BUG-Free" even SW+HW!!

[bergamesk]

feelulive

I always using/connected ext.HDD(USB3.0) Toshiba Canvio 1Tb

What brand your ext.HDD? and probably Disk stop it after device power-off(as you said that you wont hear any disk spin/voice)
LED indicator;doesnt matter,this happen from HDD HW/SW issue(or at least Disk doesnt react/work when power of and it get
power from device and in fact your device doesnt get it full OFF!!

++
Note;but my Toshiba HDD full power OFF(no any LED indicator so this LED goes to OFF)
BUT WD/Seagate do not goes LED OFF,always ON

[kanzi]

Long press menu button on remote to launch device test...

[kanzi]

As said "bergamesk" it is best to use "AirMouse". As I said go to "Settings, Advanced Settings, and Powerkey Definitions" and there you have the option "Sleep now, Shutdown and Restart".
I have marked the "Shutdown" option and when I press the red button on the remote from the box it goes out all over and even the display.
After that, I turn it on again with the red button.

Long press power button on remote to shut down or restart

[marijan]

Did you open the "Developer options" settings?
Go to "Settings", "About", and "Build". Click "OK" 7 times and go to "Developer options". Here's a video how to open it and set it up to speed up the Box.

https://www.youtube.com/watch?v=z-ySZGKJfBY

This description starts at 5:18 minutes.
Okay hi.

[doktorspon]

did u try external usb hdd too?
when i power off the box from remote the usb 2.5 hdd led is still on (but i hear no sound from hdd) my question why the led doesnt light off completely,

What happens when you pull the power cable from the box?

[doktorspon]

Can I use on this box another launcher ? This stock is brutal.

I've tried a lot of launchers, some don't work properly on this box, others are just as awful. I found a link to a pixel launcher here http://uploaded.net/file/e4by7fi2 (from a reply to this A95X MAX review https://androidpctv.com/review-a95x-max/). This is ok for me.

[doktorspon]

I asked:

Has anyone successfully connected the A95X MAX to a PC?

The lack of response to this question perhaps indicates 1) everyone is on vacation, 2) the question doesn't make sense, or 3) it's a silly question.

But anyway, let me try again:

Has anyone tried to connect this box to a PC using a Type-A male-to-male USB cable?

__________________________________

I tried to flash TWRP (link found here: https://androidpctv.com/tutorial-ins...tvbox-amlogic/) with the stock recovery program, but stock recovery gave me an error with TWRP. So I found an app called Flashify which did flash this TWRP replacing stock recovery, but then I couldn't boot to recovery, finally I flashed the original stock recovery I'd backed up and I could boot to stock recovery again. Presumably, that means the TWRP doesn't work with the A95X MAX.

[feelulive]

Hi guys

1-for the issues of BUGs;you should be contact with>>> [email protected]
because of Vendor firms doesnt give us the real manufacturer! so we have to contact with
the Vendor company! WTF

Before as I know that manufacturer is "WeChip" than I found another info that the manufacturer is "Vontar"!

For example,I bought this Box from Geekbuying and in the past when I contacted with them and tell them
some of issues(especially "Advanced Picture Settings" cause of all these settings never worked)
And Geekbuying offer me $ 20 for partial-refund for the lack of "Picture Settings" and we have dealed

They are very smart even genius

So guys pls contact your vendor and explain all those issues,might be it help/work!

2-Internal Bay 2.5" HDD using;if you contacted WesternDigital or Seagate,probably it never power-off(fully)!!!
or at least or might be Disk will stop to work but LED indicator always on(run)!!

>but if you use Toshiba Canvio;after device power-off than HDD stop it than LED indicator goes to Off after
couple if minutes!!(about 2/3minutes) but with WD/Seagate never goes off(LEDs)even if you check the HDD
then its still run.....

I guess Toshiba have some SW or HW supporter for the full power-off action!
I check Toshiba HDD with my TV or BluRay device or PC any other;its always turn off after power off device!
Just it do it within couple of minutes(after device off)

Another example my old 1Tb WD HDD always RUN!!!

3-With the latest FW;March4/2019;Picture Quality comes to more accurate/way better!!
before pinky/reddish tones but now more accuracy! Brightness get it less,so Blacks more accurate
but need more work for this!

Note;"Advanced Picture Settings"might be will not run(fix it) due to SDK factor!(I'v read this from somewhere
but I forgot know from where)

Need "ROM" too,so get the ROM take the BEER

did u try external usb hdd too?
when i power off the box from remote the usb 2.5 hdd led is still on (but i hear no sound from hdd) my question why the led doesnt light off completely,

[Luko69]

Can I use on this box another launcher ? This stock is brutal.

[bergamesk]

Hi guys

1-for the issues of BUGs;you should be contact with>>> [email protected]
because of Vendor firms doesnt give us the real manufacturer! so we have to contact with
the Vendor company! WTF

Before as I know that manufacturer is "WeChip" than I found another info that the manufacturer is "Vontar"!

For example,I bought this Box from Geekbuying and in the past when I contacted with them and tell them
some of issues(especially "Advanced Picture Settings" cause of all these settings never worked)
And Geekbuying offer me $ 20 for partial-refund for the lack of "Picture Settings" and we have dealed

They are very smart even genius

So guys pls contact your vendor and explain all those issues,might be it help/work!

2-Internal Bay 2.5" HDD using;if you contacted WesternDigital or Seagate,probably it never power-off(fully)!!!
or at least or might be Disk will stop to work but LED indicator always on(run)!!

>but if you use Toshiba Canvio;after device power-off than HDD stop it than LED indicator goes to Off after
couple if minutes!!(about 2/3minutes) but with WD/Seagate never goes off(LEDs)even if you check the HDD
then its still run.....

I guess Toshiba have some SW or HW supporter for the full power-off action!
I check Toshiba HDD with my TV or BluRay device or PC any other;its always turn off after power off device!
Just it do it within couple of minutes(after device off)

Another example my old 1Tb WD HDD always RUN!!!

3-With the latest FW;March4/2019;Picture Quality comes to more accurate/way better!!
before pinky/reddish tones but now more accuracy! Brightness get it less,so Blacks more accurate
but need more work for this!

Note;"Advanced Picture Settings"might be will not run(fix it) due to SDK factor!(I'v read this from somewhere
but I forgot know from where)

Need "ROM" too,so get the ROM take the BEER

[doktorspon]

Has anyone successfully connected the A95X MAX to a PC? When I plug the box into a PC using a male-to-male USB-A cable, I don't get any response, except for power.

(I couldn't understand why power was still on in the box when I unplugged the power cord, until I realised that it was still receiving current via usb, so I unplugged that as well and the power light went out.)

Is there anything special I need to know about to be able to send ADB commands from my PC to this box?

[feelulive]

i got this box, when i power off it from remote the usb 2.5 hdd led is still on (but i hear no sound from hdd) my question why the led doesnt light off completely,
on my csa93 and himedia q10 pro when they r powered off hdd led turns off too