A95X Max TV Box - Amlogic S905X2 A8.1 4/64 ROM Dual WiFi Gig Lan BT4.2 + Support 2.5inch SSD / HDD

[Leoben]

https://4pda.ru/forum/index.php?showtopic=937561&view=findpost&p=83092322

[marijan]

I do not know English very well, so I'm sorry you did not take pictures where you exactly solder the red wire and where it was black.
Is this the place exactly where it was supposed to be a fan connector?
Please help.
Thank you.

[bergamesk]

I also running on latest 14.13.54 install uninstall also had this issue

yesterday tested about 8hrs YT with my both versions and no any issue(re-start action)

[xbalance]

xbalance
I thought the fan would be mounted to the bottom of the box, especially if you have a connected internal hard drive (i have).
I wanted to install a fan, but I did not because my motherboard did not have the original connectors for it (I saw this forum, as it was in the first series).
I would have to solder it directly but I do not know what side the red is going to and which black wire.
On your footage I do not see how you solder them and where?
Otherwise my box does not heat up for now, although I'm pretty much watching YT.

my box also dont have the fan connector, i solder direct to power connect pin and i choose fan install on below hdd is to have colder pushing wind to SOC & pulling heat from hdd as both side also benefit it.

in the DC power connector it have 3 pin facing bottom of board.

[xbalance]

what is your recent(using) YT version??

mine is(default);1.3.11
and I'v also installed 14.13.54

I use 1.3.11 mostly

I also running on latest 14.13.54 install uninstall also had this issue

[marijan]

xbalance
I thought the fan would be mounted to the bottom of the box, especially if you have a connected internal hard drive (i have).
I wanted to install a fan, but I did not because my motherboard did not have the original connectors for it (I saw this forum, as it was in the first series).
I would have to solder it directly but I do not know what side the red is going to and which black wire.
On your footage I do not see how you solder them and where?
Otherwise my box does not heat up for now, although I'm pretty much watching YT.

[bergamesk]

what is your recent(using) YT version??

mine is(default);1.3.11
and I'v also installed 14.13.54

I use 1.3.11 mostly

[xbalance]

I suspect more like firmware not stable for YT when operate at high setting picture got distorted some time then YT hang or box restart by itself.

If I do random select movie in YT then select again and again.. it restart again even upgrade cooling system.

On other app don't have this issue.

[bergamesk]

Well my new "nominee" Box from "UGOOS" AM6 with new AML>> S922X

I'v been asked them;

1-release date?
2-Wifi OTA Upgrade?
3-Rooted?

and got the following msg,thx to Ugoos Co.

...

Hi, our trial production for our AM6 is carrying on now, as soon as it is available we will email you.
WiFi module is AP6398S with MiMO, will come with two external wifi antenna. For released version,
will be with Ugoos Feature, has one click to root function

+

Nancy Sales Manager

Chat history from website ugoos.com on April 5, 2019

15:27 You: Hi
for AM6;WiFi Upgrade? Rooted? Release Date?

10:36 Nancy, sales manager: Hi, our trial production for our AM6 is carrying on now,
as soon as it is available we will email you. WiFi module is AP6398S with MiMO,
will come with two external wifi antenna. For released version, will be with Ugoos
Feature, has one click to root function

...

[bergamesk]

OK let me check when YT App.using as whats happening such a Temp rising

Note;I never seen any re-starting issue then!

I'v been used before 3 RK3399 devices within last year! never happened Temp issue!
But as I know that AML devices more over-heat Boxes,but this Box(A95X)really cool

[xbalance]

well I'v never facing any overheat&re-start;my box cool/might be after very long period in ON then a litle warm
as seen this Box enough cool!

Note;my Box about 12/15hrs open/daily! watching mostly Movies/using IPTV etc., but No Gaming!

mine was mainly happen on youtube app, other streaming app no issue but then looking this i see temp is rising on high side. really not sure why it restart by itself only on youtube.

now problem solved SOC running cooler.

[bergamesk]

well I'v never facing any overheat&re-start;my box cool/might be after very long period in ON then a litle warm
as seen this Box enough cool!

Note;my Box about 12/15hrs open/daily! watching mostly Movies/using IPTV etc., but No Gaming!

[xbalance]

Hi everyone,

i been facing auto restart few time, suspect my tv box too hot. I had upgrade my box on SOC & DDR ram + additional Fan for cooling.

using Solid copper heatsink replacing with aluminum heatsink. before upgrade Temp was 64deg c ... now max is 55deg c.

Fan 40mm x 40mm x 7mm = 5vdc direct solder to direct to power connector.


and also running optical fiber HDMI cable quality is wonderful.

[doktorspon]

how do i turn off the boot animation on a95x max tv box? its kinda annoying and loud

You don't. At least until there's a safe way to replace the boot animation. I don't have audio attached yet, but I guess there's an audio track with the boot animation and it's embedded in the boot animation file.

If we could load TWRP as the recovery file we could replace it, but there's no working TWRP for our A95X MAX. (I used TWRP to change the bootanimation for my phone.) It may be possible to replace the bootanimation with the Flashify app or maybe with a terminal emulator.

And I just found an app called Boot Animations for Superuser. You might check it out; I've never used it. You may have to find a replacement boot animation.

There is a file in /system/bin called "bootanimation", but I don't know anything about its usage.

If you actually like the A95X MAX boot animation and you could get the original file for the boot animation, you could remove the audio file, then put it back... but it sounds risky.

[doktorspon]

2-Check your(from Settings>>ABOUT;

>Version

8.0.1

>Android security patch level

June 5,2018

>Kernel version

4.9.76(gcc version 6.3.1 20170109(Linaro GCC 6.3-2017.02))
ubuntu@google-server #2
Wed Jan 9 10:14:12 CST 2019

>Build

A95X_MAX_B-8.1.0-201903041010

That's all exactly the same as mine. (Just as a confirmation.)

frose6565, I don't know why yours is March 1, but I'd guess that it isn't significant. It maybe that the supplier got the firmware upgrade earlier, when you got yours. I wouldn't worry at the moment. When the wheels start falling off, let us know!