M8S PRO W 2G 16G DD3 2018 11 21 rev 2.3 completely bricked

[fred2617]

I programed a new Version for LUUN and Update to recovery my M8s V2.3...

You need with Usb Loader 2.08 and put this image on Short mode ( you can see the image )

https://mega.nz/#!SdxXXAbC!ob80ieq0VCGtpcsQOVeC-pdSOpI73fMPvkSTCTWJ_ig

later you put this update into a USB and update from zip

https://mega.nz/#!7NhRkQgL!3CwLUxflT7k492ejC7jjinA10c7U2Cxk2EzQbMSPt60

FR bonjour faut il souder d?finitivement ou juste pour le flashage de la rom?

EN hello must it solder permanently or just for the flashing of the rom?

[JaV1]

FR bonjour faut il souder d?finitivement ou juste pour le flashage de la rom?

EN hello must it solder permanently or just for the flashing of the rom?

no, you just have to join these points and plug in the usb to turn on the device in flash mode, once you boot you can remove the union and plug in the device

[nikito7989]

I bought the box with Voice Control, but doesn't work. The voice control will work with my remote control after install this firmware?

Nexus ATV firmware with Voice Control https://drive.google.com/file/d/15SB...l1fZT-XKG/view

[felipevmacedo]

Nexus ATV firmware with Voice Control https://drive.google.com/file/d/15SB...l1fZT-XKG/view

Didn't work, stuck at 4%. When upgraded, it stuck at red light :/

[nikito7989]

Didn't work, stuck at 4%. When upgraded, it stuck at red light :/

Nonsense!!!

[felipevmacedo]

Nonsense!!!

When installed the Nexus firmware, bricked the box. After brick, only stuck at 4% on USB Burning Tool.

[fred2617]

no, you just have to join these points and plug in the usb to turn on the device in flash mode, once you boot you can remove the union and plug in the device

ok thank you

[fred2617]

Hello the link for the update mega is dead

it works today thank you

[JaV1]

hey Fred!!

Did you solve the problem?

[fred2617]

hey Fred!!

Did you solve the problem?

yes i can dowload this update but i can't intall this

[JaV1]

what is your motherboard model??

can you upload a image??

[fred2617]

what is your motherboard model??

can you upload a image??

i have mecool m8s po w rev2.3

[JaV1]

you have to follow those steps, and you have to take into account the versions of the files.

After two weeks of trying, I managed to revive the device. but it only works with the original firmware. our device is very special. if you need something I can help you by email or whatsapp.

[fred2617]

thank you this function with the rom luun

[JaV1]

The firmware that I uploaded is a modification that I made myself to be able to update later to the last original firmware, which I attached in the other link.


I'm very glad that you could have it. If you need something or help to update to the latest version, tell me.