[ROM] Ugoos AM6 ATV_by_Sasvlad ( AndroidTV 9.0 )

[blacks]

Hello Sasvlad,

First I would like to say thank you for all the hard work that you have done.

I ordered my UGOOS AM6 back in October 2019 with the intention of flashing your rom as soon as I got it.

After receiving the beast (UGOOS AM6) it was like a dream come true it had all the functionalities a guy could ask for but I ran in to one problem,I could not get your rom flash on my box.
i searched and searched and I finally got it working after months of looking and I wanted to share this so that you can update your initial post or at least someone can see it in case they runs in to this same problem.

First of let me start by saying my initial problem was that my computer (Windows 10) never recognized my Android device when I connected both of them using USB BURNING TOOL .

Now in order to get that fix I had to disable the driver signature enforcement when your on Windows 8.1 and 10. ( This was the only thing I never tried so my guess is this is what was stopping my pc from recognizing my android device)

When you do this step then and only then can we do what was posted by mo123 on page 5 # 73, which is

Install Amlogic Burning Tool.
Load the firmware and click Start.
Press and hold a paperclip or toothpick in the bottom top hole of the AM6.
Connect a USB A to USB A cable to a back USB port on your PC and the other to the OTG port, marked in blue on the AM6.
Now connect the power cord to the AM6 while still holding the paperclip/toothpick.
Wait for the firmware to load and finish.

Hopes this helps.

Now that that’s over I have a one problem with the rom so far is that Netflix is showing me an error which says “ This version of Netflix app is not compatible with your device (-13).

Can you or someone some me or explain to me how to fix this please?

Edit on the 22-04-2020: I forgot to mention that while installing Amlogic Burning Tools I plugged up and powered on my UGOOS AM6 in order for it to see what drivers it needed for my device.

???????After installing Amlogic Burning Tool I plug out and Took off my device and then I started tuning the steps that mo123 suggested on page 5 starting by the step that says loading firmware.

[m1pnk]

hey sasvlad.... im trying to install a backup from one box to another via a backup file from box 1 onto box 2 so will have same apps and settings ... im getting the "no partitions selected error" can you point me in the right direction to fix... many thanks

[BOBAJS]

And how to activate it please or run it

[Sasvlad]

Hi Sasvlad, I have a question about TWRP. I have the first installation of AM6_dce_ATV_by Sasvlad_v.0.3.1 DualBoot and I wonder whe TWRP is stored or need to be installed? When is used and how. I'm new to it.

TWRP is already in this firmware.

[BOBAJS]

Hi Sasvlad, I have a question about TWRP. I have the first installation of AM6_dce_ATV_by Sasvlad_v.0.3.1 DualBoot and I wonder whe TWRP is stored or need to be installed? When is used and how. I'm new to it.

[BOBAJS]

Hi mo123, i did reflash of ATV AM6_dce firmware from Sasvlad v.0.3.1 Dualboot and again when I set SSH in CoreELEC reflesh Nightly to 9.2.2. Ok will be official. Dual Boot works in Estuary look, I use Confluence and it doesn't work there. Can this be changed?
Overall Firmware is very good.

[Sasvlad]

All this was the night version, but after the reboot the official FW 9.2.2 was recorded and there is no longer a dual boot.

Create an overrides.xml file with the following contents:

<? xml version = "1.0" encoding = "UTF-8"?> <overrides> <override action = "RebootToAndroid"> <action> System.ExecWait ("/ usr / sbin / rebootfromnand") </action> <action > XBMC.Reboot () </action> </override> </overrides>

Put it in the Userdata folder.
And in the settings of the skin of the power menu, create a new item with the action: RebootToAndroid

[BOBAJS]

All this was the night version, but after the reboot the official FW 9.2.2 was recorded and there is no longer a dual boot.

[mo123]

Hi Sasvlad, today I uploaded your ATV AM6_dce by Sasvlad v.0.3.1 Dualboot firmware to my Ugoos AM6 Plus. SD card and toothpick. After uploading and reset Android ran and then restarted on dualboot to CoreELEC night version. After the next reset, but CoreELEC went into the official version 9.2.2 and I can not get back to Android. What should I do for dualboot back. I am sorry for my bad English

In CoreELEC power off menu there is a setting 'Reboot to nand'.
That boots back to Android.
If it's missing then you need to reflash the firmware.

[BOBAJS]

Hi Sasvlad, today I uploaded your ATV AM6_dce by Sasvlad v.0.3.1 Dualboot firmware to my Ugoos AM6 Plus. SD card and toothpick. After uploading and reset Android ran and then restarted on dualboot to CoreELEC night version. After the next reset, but CoreELEC went into the official version 9.2.2 and I can not get back to Android. What should I do for dualboot back. I am sorry for my bad English

[Quietsch]

@ Sasvlad your Firmware with my AM6 Plus is much more better than my Shield. Its now resting in the bedroom

[Sasvlad]

Updated: AM6_dce Android TV by Sasvlad v.0.3.1 Dualboot

[eseze]

Hi,

I have just tested the TWRP included in ROM version 0.3.1 - as far as I can see by now it's running smoothly.

THANKs a lot!

Keep on staying healthy ...

Best regards
eseze

[Sasvlad]

Hi Sasvlad,

is the new version of TWRP now included in ROM 0.3.1 or is it still the stock recovery?

Thank you in advance - stay healthy
eseze

Yes!
Thank you.

[eseze]

In recent versions, improved TWRP is back again.

Hi Sasvlad,

is the new version of TWRP now included in ROM 0.3.1 or is it still the stock recovery?

Thank you in advance - stay healthy
eseze