[ROM] Ugoos AM6 ATV_by_Sasvlad ( AndroidTV 9.0 )

[Sasvlad]

Updated to AM6 Android TV+CoreElec by Sasvlad 0.2.8+ Dualboot

[owhbaem]

hi mo123 can you screenshot your magisk safetynet. i doing twice. but it kept failed on integrity and ctsprofile.

[mo123]

??????all well now. maybe im pressing wrong button.

first, im flashing update through usb by stock recovery. after success, im able to boot+ i see magisk not install.
??????after that i shut down and pressing the maskrom button. im flashing ATV_by_Sasvlad. all downloaded file are gone (i dont care much) its like new again. thanks a lot for giving support mo123

Glad you got it working.
If you want to make a backup of your apps and their data to easily restore later if you do a full reflash, you can try
https://apkpure.com/migrate-custom-r.../balti.migrate or

https://f-droid.org/packages/dk.jens.backup/

Then save it on a flash drive to have a backup.

[owhbaem]

Are you using the latest flash tool?
https://androiddatahost.com/wp-conte...l_v2.1.7.3.zip
Are you using a thick USB A Male to USB A Male Cable
Using Windows 8 and not Windows 10?
Try to load an earlier firmware and also connect the power cable quickly.
I also got an error once when I connected the powered power cable slowly lastly.

Or use
https://chinagadgetsreviews.com/down...er-v2-0-2.html

??????all well now. maybe im pressing wrong button.

first, im flashing update through usb by stock recovery. after success, im able to boot+ i see magisk not install.
??????after that i shut down and pressing the maskrom button. im flashing ATV_by_Sasvlad. all downloaded file are gone (i dont care much) its like new again. thanks a lot for giving support mo123

[mo123]

i got this error 0x10401001 Romcode/BL2_boot stage error, at 3%

i think, i soft brick my am6. anything that can restore back without using usb burning tools?

Are you using the latest flash tool?
https://androiddatahost.com/wp-conte...l_v2.1.7.3.zip
Are you using a thick USB A Male to USB A Male Cable
Using Windows 8 and not Windows 10?
Try to load an earlier firmware and also connect the power cable quickly.
I also got an error once when I connected the powered power cable slowly lastly.

Or use

https://chinagadgetsreviews.com/download-amlogic-burn_card_maker-v2-0-2.html

[owhbaem]

Whole flashing takes about 5 minutes.
Make sure you are using a decent quality cable, correct power supply and no things running on the PC that can interfere with flashing or USB port power(power saving disabled).
Then try to flash again.

i got this error 0x10401001 Romcode/BL2_boot stage error, at 3%

i think, i soft brick my am6. anything that can restore back without using usb burning tools?

[mo123]

how long does it takes to flash? for example, im flashing am6 .0.2.8. img. it is correct? because i got bootloop before this. it is normal stuck at 3%: download UBOOT for 10 minute?

Whole flashing takes about 5 minutes.
Make sure you are using a decent quality cable, correct power supply and no things running on the PC that can interfere with flashing or USB port power(power saving disabled).
Then try to flash again.

[owhbaem]

how long does it takes to flash? for example, im flashing am6 .0.2.8. img. it is correct? because i got bootloop before this. it is normal stuck at 3%: download UBOOT for 10 minute?

[mo123]

hi. kindly advise me, how to make this device detected on burning tools? i install the driver, put the image, and plug in USB A, but the device does not detected. is there any reset button? i dont see 1.

Install Amlogic Burning Tool.
Load the firmware and click Start.
Press and hold a paperclip or toothpick in the bottom top hole of the AM6.
Connect a USB A to USB A cable to a back USB port on your PC and the other to the OTG port, marked in blue on the AM6.
Now connect the power cord to the AM6 while still holding the paperclip/toothpick.
Wait for the firmware to load and finish.

[owhbaem]

hi. kindly advise me, how to make this device detected on burning tools? i install the driver, put the image, and plug in USB A, but the device does not detected. is there any reset button? i dont see 1.

[mo123]

after installing magisk, i got ctsprofile:false
basic integrity : false.

im not doing right?

You also have to follow the instructions I posted you quoted yourself 2 posts before.

[owhbaem]

after installing magisk, i got ctsprofile:false
basic integrity : false.

im not doing right?

[ClarkKent]

one last thing, does having google certified can make am6 play netflix in 4k?

or anything that can change widevine L3 to L1?

It'll help. And certainly can't hurt. How you going to do that? Please advise us when you're successful. The fingerprint change through magisk was successful, but didn't help me a lot. Tho I won't say I was able to fully test it.

[owhbaem]

Make device Google Certified to fix some streaming apps to work
Inside Magisk Manager
Go to Downloads and install MagiskHideProps.
Restart
Now from a terminal app(https://apkpure.com/terminal-emulato...al.androidterm) type
props and press enter
Press 1 to change the fingerprint
Press f to pick a fingerprint
Pick one with Android 9 device like Mecool or Xiaomi then press 1 then 2 again.
Press y to accept then y again to reboot.
Go back into props and select Simulate device then press s and y to restart.
Select all the different entries to emulate of the device, just say no to restart for each one, when you changed all 6 or 7 entries then you can restart for the last one.

To fake the wifi, you can install Xposed or EdXposed inside MAgisk Manager and then install the FakeWifi module to use wifi as an ethernet connection so games like Asphalt can work correctly.

one last thing, does having google certified can make am6 play netflix in 4k?

or anything that can change widevine L3 to L1?

[mo123]

hi. im new here. i received am6 plus yesterday. can i flash this rom and also can i make magisk work in stock rom?

Yes, all the instructions are already posted here.