X96 Air Amlogic S905X3 Android 9.0 Media Player

[Satbeginner]

I will send you a temporary link, wait a few minutes

Try this one:

https://drive.google.com/open?id=1BEMTThAOc75eXtfEFMwEXHZIL2s0nY_z

and let me know if you could download it

[Satbeginner]

Hi Friend TWRP Link does not work. Do you have this version somewhere to send me?

I will send you a temporary link, wait a few minutes

[johny163]

Hi, these are the few basic steps:

This will erase everything you have on the box.
It depends whether you already have TWRP recovery as a result of previous ROM's you have installed.

Both the ROM and TWRP can be dowloaded from here: https://4pda.ru/forum/index.php?show...#entry93085504
(I use Google Chrome browser, it has the translate build in, so I can "read" Russian :-)

ROM Link: https://drive.google.com/drive/folde...qeiPHv8uVwbp0w

TWRP Link: https://4pda.ru/forum/dl/post/183565...31_AML_ViT.zip



- prepare an Micro SD-card with both TWRP and the ROM on it.

- boot into recovery by holding the reset inside the 3.5mm and power on;

- load TWRP from SD-card if you do not have TWRP installed but still stock recovery;

- if you already have a TWRP recovery, skip the loading of TWRP;

- using the loaded TWRP install the ROM you also have on the SD-Card.

- Let the install complete;

- now reboot

This is basically it.

Let me know how you get on.

BTW, I still run the SLIMBOX-N5MAX-X3-ATV-OTA-for-20191119 version , I will install the ATV 2.1 myself tomorrow, to test that one too.

Success,

Leo

Hi Friend TWRP Link does not work. Do you have this version somewhere to send me?

[Satbeginner]

Thank you very much my friend I will be waiting

Hi,

I now have installed the 2.1 version of the ROM, and it goes well so far.
I think it might be even a bit more "fluid" than the previous one, also WiFI has good results.

So in short this is what I did:

put both ZIP-files on an SD.
Reboot into stock recovery
Update from EXTernal to load TWRP
Inside TWRP slide to the right using an Airmouse
INSTALL the ROM from SD storage (Select bij TWRP button right down corner)

Good luck,

Leo

[Satbeginner]

Thank you very much my friend I will be waiting

Hi, these are the few basic steps:

This will erase everything you have on the box.
It depends whether you already have TWRP recovery as a result of previous ROM's you have installed.

Both the ROM and TWRP can be dowloaded from here: https://4pda.ru/forum/index.php?show...#entry93085504
(I use Google Chrome browser, it has the translate build in, so I can "read" Russian :-)

ROM Link: https://drive.google.com/drive/folde...qeiPHv8uVwbp0w

TWRP Link: https://4pda.ru/forum/dl/post/183565...31_AML_ViT.zip



- prepare an Micro SD-card with both TWRP and the ROM on it.

- boot into recovery by holding the reset inside the 3.5mm and power on;

- load TWRP from SD-card if you do not have TWRP installed but still stock recovery;

- if you already have a TWRP recovery, skip the loading of TWRP;

- using the loaded TWRP install the ROM you also have on the SD-Card.

- Let the install complete;

- now reboot

This is basically it.

Let me know how you get on.

BTW, I still run the SLIMBOX-N5MAX-X3-ATV-OTA-for-20191119 version , I will install the ATV 2.1 myself tomorrow, to test that one too.

Success,

Leo

[johny163]

I will try to do a quick step-by-step guide later.

Thank you very much my friend I will be waiting

[Satbeginner]

How and what to upload ? Will you help me my friend?

I will try to do a quick step-by-step guide later.

[johny163]

Yes there is, I'll try to attach a picture

How and what to install it ? Will you help me my friend?

[Satbeginner]

Please check me. Is there a menu in Polish / Poland?

Yes there is, I'll try to attach a picture

[johny163]

I have a P2 4GB 64GB 1000Lan and use this ROM:

https://4pda.ru/forum/index.php?show...#entry93085504

I use the SlimBox ROM

Please check me. Is there a menu in Polish / Poland?

[Satbeginner]

If I have the name X96 Air P2 in Settings, do I need to look for the same Firmware "P2"? Can I upload P3? Can anyone help me with this in a queue so as not to damage?

I have a P2 4GB 64GB 1000Lan and use this ROM:

https://4pda.ru/forum/index.php?show...#entry93085504

I use the SlimBox ROM

[johny163]

Read a previous post by satbeginner, (that's me) .
I run a rooted, reasonably clean ROM from the Russian site 4pda, I am happy with it.
The original ROM is craperdepap!!

Good luck,

Leo

If I have the name X96 Air P2 in Settings, do I need to look for the same Firmware "P2"? Can I upload P3? Can anyone help me with this in a queue so as not to damage?

[Satbeginner]

Will I find such an update somewhere on the internet? I ordered on Aliexpress and the seller doesn't speak anymore. My device is X96 Air_P2

Read a previous post by satbeginner, (that's me) .
I run a rooted, reasonably clean ROM from the Russian site 4pda, I am happy with it.
The original ROM is craperdepap!!

Good luck,

Leo

[johny163]

That is because the firmware uses old Android 9 code where the Bluetooth.apk is faulty, but it is fixed in newer Android 9 AOSP code. Tell your Vendor they need to supply you with a Firmware update or get a Refund.

Will I find such an update somewhere on the internet? I ordered on Aliexpress and the seller doesn't speak anymore. My device is X96 Air_P2

[savvas]

P1, P2, P3 hwersion clean, stable ATV9 rom: https://4pda.ru/forum/index.php?show...#entry91789616

Hi,
I have a brand new X96 Air P3 with Rom: 20191204 - 1754.
I tried the custom Rom "X96Air_P3_20191220-2048_ATV9_davietPDA_v1.5". Didn't like it, a lot of USELESS apps!!!! Much more than the official. Removed same day.
Why the don't create simple and light Roms, and after anyone can add his prefered individual apps. (Gapps and a file manager are enough)

Unfortunately the official rom stuck every time I try to set different txt size on settings, and can fix it only by factory reset! After 3 flashes I let it as is.