X96 Air Amlogic S905X3 Android 9.0 Media Player

[sogoku_vn]

I have a TX3 s905x3 2/16 tv box. Preinstalled firmware is useless so i tried installing other firmwares to test. All other firmwares found in another forum, work but without LAN....(looks like i have a fake TX3??).
I have tried also some firmwares from X96 Air box, and i can confirm that P2 version firmware are REALLY SMOOTH on my box! But front lcd and remote control don't work.
I don't really care about front LCD, but i would appreciate if there is anyone here that can help me fix the remote contol!
Have tried transfering remote.tab(1,2,3) from preinstalled firmware, didn't work.
Tried General.kl from preinstalled firmware, didn't help.
Please anyone?
HAPPY NEW YEAR TO ALL OF YOU GUYS!

Try this. My box TX3 S905x3 2/16
https://drive.google.com/drive/folde...frJY6dzc_ivcl6

[sogoku_vn]

Tanix TX3 have lan 10/100mb,you buy on Bangood or Ali?

https://www.banggood.com/Tanix-TX3-S...r_warehouse=CN

Try this. My box TX3 S905x3 2/16

https://drive.google.com/drive/folders/1lvY6A7YgaVqdqa55WzfrJY6dzc_ivcl6

[jebaga]

I have a TX3 s905x3 2/16 tv box. Preinstalled firmware is useless so i tried installing other firmwares to test. All other firmwares found in another forum, work but without LAN....(looks like i have a fake TX3??).
I have tried also some firmwares from X96 Air box, and i can confirm that P2 version firmware are REALLY SMOOTH on my box! But front lcd and remote control don't work.
I don't really care about front LCD, but i would appreciate if there is anyone here that can help me fix the remote contol!
Have tried transfering remote.tab(1,2,3) from preinstalled firmware, didn't work.
Tried General.kl from preinstalled firmware, didn't help.
Please anyone?
HAPPY NEW YEAR TO ALL OF YOU GUYS!

Tanix TX3 have lan 10/100mb,you buy on Bangood or Ali?

https://www.banggood.com/Tanix-TX3-S905X3-4GB-RAM-64GB-ROM-2_4G-5G-WiFi-Android-9_0-4K-8K-TV-Box-Support-Voice-Control-p-1582531.html?ID=533601&cur_warehouse=CN

[l3g0r]

hi any solution for 2gb ram version and clock led?

I flashed latest lekha7777 v2 but same problem with led. latest atv rom have bluetooth error.Tvbox not bluetooth.

https://4pda.ru/forum/index.php?showtopic=969746&view=findpost&p=92367633

If someday works can display tvbox temp in led clock?

[Hexagon]

I have a TX3 s905x3 2/16 tv box. Preinstalled firmware is useless so i tried installing other firmwares to test. All other firmwares found in another forum, work but without LAN....(looks like i have a fake TX3??).

Take a photo of your board, maybe your box is really different inside.

[dracosc22679]

I have a TX3 s905x3 2/16 tv box. Preinstalled firmware is useless so i tried installing other firmwares to test. All other firmwares found in another forum, work but without LAN....(looks like i have a fake TX3??).
I have tried also some firmwares from X96 Air box, and i can confirm that P2 version firmware are REALLY SMOOTH on my box! But front lcd and remote control don't work.
I don't really care about front LCD, but i would appreciate if there is anyone here that can help me fix the remote contol!
Have tried transfering remote.tab(1,2,3) from preinstalled firmware, didn't work.
Tried General.kl from preinstalled firmware, didn't help.
Please anyone?
HAPPY NEW YEAR TO ALL OF YOU GUYS!

[dracosc22679]

I have a TX3 s905x3 2/16 tv box. Preinstalled firmware is useless so i tried installing other firmwares to test. All other firmwares found in another forum, work but without LAN....(looks like i have a fake TX3??).
I have tried also some firmwares from X96 Air box, and i can confirm that P2 version firmware are REALLY SMOOTH on my box! But front lcd and remote control don't work.
I don't really care about front LCD, but i would appreciate if there is anyone here that can help me fix the remote contol!
Have tried transfering remote.tab(1,2,3) from preinstalled firmware, didn't work.
Tried General.kl from preinstalled firmware, didn't help.
Please anyone?
HAPPY NEW YEAR TO ALL OF YOU GUYS!

[Satbeginner]

Hi, I tried several of the available rom's, and my preference is with the ATV versions.

However, I do have a problem using any of the versions, because I need this box to watch Dutch IP television, NLziet and Ziggo TV.
Both experience buffering and dropped frames.
I looked for causes, and ended with concerns about the used codec.

OMX.amlogic.acv.decoder.awesome

Do other people have similar issues?

Un saludo,

Leo

[Rebellion]

I have flashed the ATV root rom and I have to say that it works correctly, much better than the standard rom

[Voland34]

Hi guys!

Is possible to install a root version from the sd card?

Best Regards and Happy New year!

Yes, i just did using .img file (custom android tv roms at 4pda forum on x96 air) and tutorials using Burn Card Maker. It's worked flawlessly.
happy new year

[Rebellion]

Hi guys!

Is possible to install a root version from the sd card?

Best Regards and Happy New year!

[Satbeginner]

I have 2 units of X96 Air s905x3 4GB/64GB units that I play with. Here are some firmware tweaking feedbacks :

1. Flashing firmwares:
P1 - Works smoothly, Bluetooth works quickly, no other significant issues, BUT TV Box front LED doesn't work anymore after some time.
P2 - Everything works, but not as smoothly.
P4 - Works smoothly, but Bluetooth doesn't work and hangs.

.....)

Hello, do I understand it right: you have a P1 version that you installed on a 4GB/64GB 1000Mb box?
Could you please share this versions for me?
Is this an Android 9.0 "normal" or Android TV 9.0?

Un saludo from Spain,

Leo

[trojullo]

Hi all,

the FW as back-upped by nvuphi is the best!!!!


As far as I can see now the previous X96Air_P2_20191017-1917 FW release IS NOT Android TV, but just a (cripple) Android 9.0 :-(

The backup from the nvuphi post IS a real Android TV.

I used the stock recovery that I could boot into using the "Power Menu" apk, enabled me to boot the TWRP.
From there I made a backup, just to be sure.

Next I downloaded the FW from nvuphi and used 7-ZIP to unrar it on my Windows machine.
I did put it on the SC card as described, but TWRP could only find my own backup, it refused to look on the SD card where the downloaded FW was.
As it turned out, my own backup was on the internal storage of the X96Air, and not on the SD card?

Anyway, I did boot like normal and moved the downloaded and extracted backup FW to the internal storage, next to my own backup.

From there I used "Power Menu" again to boot into recovery, to load TWRP again.
This time TWRP did see both my own backup AND the downloaded one :-) that I needed.

I restored the downloaded one and that ended successfully, so I initiated a reboot with my fingers crossed.........

Yes, Yes, Yes!!

Now the X96Air_P2 IS A REAL ANDROID TV box :-)

In the previous version the WiFi would only see 5.8GHz when I used channels below #100, and that has not changed, but I can live with that.

I am a happy (Christmas) bunny now playing again with my X96Air

Un saludo from Spain,

Leo

Veo que escribes desde España, pero imagino que lo que leo lo escribiste en Ingles y es google el que hace una traducción que no termino de entender. ¿podrias darme instrucciones (para torpes muy torpes) en castellano de como has hecho el proceso?
Gracias de antemano

[Satbeginner]

Hi all,

the FW as back-upped by nvuphi is the best!!!!


As far as I can see now the previous X96Air_P2_20191017-1917 FW release IS NOT Android TV, but just a (cripple) Android 9.0 :-(

The backup from the nvuphi post IS a real Android TV.

I used the stock recovery that I could boot into using the "Power Menu" apk, enabled me to boot the TWRP.
From there I made a backup, just to be sure.

Next I downloaded the FW from nvuphi and used 7-ZIP to unrar it on my Windows machine.
I did put it on the SC card as described, but TWRP could only find my own backup, it refused to look on the SD card where the downloaded FW was.
As it turned out, my own backup was on the internal storage of the X96Air, and not on the SD card?

Anyway, I did boot like normal and moved the downloaded and extracted backup FW to the internal storage, next to my own backup.

From there I used "Power Menu" again to boot into recovery, to load TWRP again.
This time TWRP did see both my own backup AND the downloaded one :-) that I needed.

I restored the downloaded one and that ended successfully, so I initiated a reboot with my fingers crossed.........

Yes, Yes, Yes!!

Now the X96Air_P2 IS A REAL ANDROID TV box :-)

In the previous version the WiFi would only see 5.8GHz when I used channels below #100, and that has not changed, but I can live with that.

I am a happy (Christmas) bunny now playing again with my X96Air

Un saludo from Spain,

Leo

[Satbeginner]

This Android TV 9 Firmware (FW) is cooked by DaiVietPda (from Vietnam). For commercial purposes, retailers in Vietnam are limited to sharing outward. I tried to extract FW from my box as a backup of TWRP so I could install it to another box through the Restore command of TWRP as well.
Note: only applies to X96Air_P2_20191017-1917
I am not responsible for the risks you encounter when installing or losing the warranty.

Prepare:
- Insert SD Card to TF slot
- Download TWRP_3.2.2_Android_9.0.zip and save to SD Card
- Download My Backup FW, extract it and and copy to the card, the path to the firmware on the card should look like this: TWRP\Backups\1234567890\2015-01-01--07-26-31_X96Air_P2_20191017-1917\many files.

(Before starting experiments with firmware, it is recommended to make a full backup of your firmware with TWRP. Tick everywhere except for the system image and vendor image sections, because they are duplicated.)

Through the Power menu app or Reset (hold reset button - inside AV hole - when pluging power), we go in stock recovery
Move the mouse Apply Update From EXT.
Update From SDcard.
Browse to and click on the file TWRP_3.2.2_Android_9.0.zip
As TWRP boots up, click "Restore / Restore", browse to the firmware located, until you see the sections for recovery, tick should be everywhere, swipe and the firmware has install.

Hi, I have a X96Air P2 with the 20191017-1917 release installed.
The way I understand, you got the newer firmware , but for the restore using TWRP I have to name it like the old one?