New firmware android 9.0 for Amlogic S905x

[hannah]

Does it has wifi/bluetooth support for Nexbox A95x model?

I have installed these ROMs and remote / wifi did not work.

[hannah]

HERE just made android 9 ATV. It loads and works fine. Only with the keyboard you need to install another.

https://mega.nz/#!G8020SIY!N0sB8XbiR...s-1IObWpzibYNo

I have also tested this ROM in my Nexbox A95X 2GB/16GB S905X with WIFI Module AP6330

- I have installed via USB Burning Tool and installation was a success
- Remote and WIFI are NOT working

Please advise what can I do now.

[hannah]

Made a port with the new SC Superceleron ATV Pie firmware.
https://mega.nz/#!L0VizSKZ!JSLDSAhhW...Xw2sqO-BUFw5qY

I have tested this ROM in my Nexbox A95X 2GB/16GB S905X with WIFI Module AP6330

- I have installed via USB Burning Tool and installation was a success
- Remote and WIFI are NOT working

Please advise what can I do now.

[sagert]

I found another way for root rights, but I have not tested yet.

https://forum.xda-developers.com/project-treble/trebleenabled-device-development/phh-treble-root-phhs-superuser-phhusson-t3811563

[toilatoiok]

Hi Sagert thanks for your help,

I use the original version of DaivietPDA.When I flash magisk via the update menu, he prepares the installation,
restarts the box and I receives the error message:

E:Signature verification failed
E:error 21.

I also tested the version X96_Khadas_Vim_Pie_ATV from this thread, root works when i installing Magisk.

But I would like to use the version of daivietpda with WiFi and I must root this rom.

I also tried to patch the boot.img with magisk and then to replace and flash it, But that didn't work.

What possibilities do i have to root this Rom

Hello ! Have you rooted the daivietpda version yet? If not then do it your way only offline! You can update V3 or V4 to root! Version V1 is not rooted!
-
You may need to use a memory card instead of USB!

[sagert]

You replaced the system.partition of the ROM version X96_Khadas_Vim3_Pie with the version of SC-Generic-S905x2-S905x3-USE R-ATV-v1.0-20200103 and repacked it with the AML CustomizationTool?

Yes.

[Genius85]

Yes.Long explain.I took only system.PARTITION from it.I tried to take boot.PARTITION.But it starts with it but when watching a video there is an overload.Still there is twrp which can be ported but it takes a long time.Still in this firmware you need to install AOSP.keyboard.apk after installation.

You replaced the system.partition of the ROM version X96_Khadas_Vim3_Pie with the version of SC-Generic-S905x2-S905x3-USE R-ATV-v1.0-20200103 and repacked it with the AML CustomizationTool?

[sagert]

I will test the ROM.

Can you explain me how do you port the ROM to S905x?

Did you take this version from here: https://forum.freaktab.com/forum/tv-...ndroidtv-build ?

Yes.Long explain.I took only system.PARTITION from it.I tried to take boot.PARTITION.But it starts with it but when watching a video there is an overload.Still there is twrp which can be ported but it takes a long time.Still in this firmware you need to install AOSP.keyboard.apk after installation.

[Genius85]

Made a port with the new SC Superceleron ATV Pie firmware.



https://mega.nz/#!L0VizSKZ!JSLDSAhhW...Xw2sqO-BUFw5qY

I will test the ROM.

Can you explain me how do you port the ROM to S905x?

Did you take this version from here: https://forum.freaktab.com/forum/tv-...ndroidtv-build ?

[Genius85]

Yes, me too

I wrote Daivietpda via Facebook and asked him if he could migrate the wifi driver or if he could root the ROM.
But he doesn't answer.

I have invested so much time and tried so much, but it doesn't work

There must be a way to root this rom.

[langthang]

You can install v3 and v4 updates on Daivietpda and try to set root rights on them.

I got into the same problem: installed DaiViet firmware, update 2, update 3/4. When installing magisk 19.3 via update app the box got into stock recovery with error Signature verification failed

[sagert]

Made a port with the new SC Superceleron ATV Pie firmware.

https://mega.nz/#!L0VizSKZ!JSLDSAhhWtfXbf4wsxdeCMyu9JCO_Xw2sqO-BUFw5qY

[sagert]

Hi Sagert thanks for your help,

I use the original version of DaivietPDA.When I flash magisk via the update menu, he prepares the installation,
restarts the box and I receives the error message:

E:Signature verification failed
E:error 21.

I also tested the version X96_Khadas_Vim_Pie_ATV from this thread, root works when i installing Magisk.

But I would like to use the version of daivietpda with WiFi and I must root this rom.

I also tried to patch the boot.img with magisk and then to replace and flash it, But that didn't work.

What possibilities do i have to root this Rom

You can install v3 and v4 updates on Daivietpda and try to set root rights on them.

[Genius85]

Hi Sagert thanks for your help,

I use the original version of DaivietPDA.When I flash magisk via the update menu, he prepares the installation,
restarts the box and I receives the error message:

E:Signature verification failed
E:error 21.

I also tested the version X96_Khadas_Vim_Pie_ATV from this thread, root works when i installing Magisk.

But I would like to use the version of daivietpda with WiFi and I must root this rom.

I also tried to patch the boot.img with magisk and then to replace and flash it, But that didn't work.

What possibilities do i have to root this Rom

[sagert]

Hi Guys, I have a Nexbox A95x - B7N 2GB-RAM 8GB-ROM and I have the firmaware of daivietpda (aml_upgrade_package-tx5-atv9-ap6212-1GB-2GB.7z) installed. I want to root the device because I want to fix the problem with the wifi. How can I root the firmware? How can I install TWRP and what version do I need. I tried the TWRP 3.2.2 temp to get access, and installed recovery.img (TWRP) from there. But it doesn't work. So far I understood that I first have to install TWRP and then Magisk.zip to get the root rights.

I wrote about this on the last page.

On 4pda there is advice but it is in Russian. But I have not tested this method yet.

https://4pda.ru/forum/index.php?s=&showtopic=774072&view=findpost&p=91068157

I also wrote on the last page how to make a root. That I already used.There is no twrp yet.