[Rom] Android 10 for S912

[ReaperMan]

Android 10
(Desert names are dropped?)

Lineage OS Android 10 AOSP
.
***Untested***
Dev: sergej_a_g
Lineage-17.1 Android 10 AOSP to Mecool BB2 Pro 493 MB
.
https://4pda.ru/forum/index.php?show...64998&st=19360
.

"WiFi and bluetooth.
The stock control panel turns the set-top box on and off,
Lan 1000 works.
There are no gaps.Apk install from the Files application.

Checked on MECOOL BB2 PRO 3/16."

(Flash via TWRP- as Google translated)

https://yadi.sk/d/i-cBLeuSQTWJXQ

.

Original Platform, base firmware.

LineageOS 17.1

(patches from Andy Yan)

• https://4pda.ru/forum/index.php?showtopic=892755&st=18160#entry93807981

Attention:

the assembly is fully compatible with Treble patches, the only difference is in the presence of the file / system / phh / secure. With normal vendors, it starts without any patches and even in Enforced mode, just like AOSP from Phh. If your LineageOS from Andy starts, but LOSQ does not, then try to delete the "secure" file

Bugs:

with the exception of fixes, the same as on LineageOS 17.1 from Andy Yan (in some cases the broadcast on TV does not work and the offline charging mode does not work normally; calls via BT do not go with some headsets; problems with GPS, etc., etc.)

2020-10-10
lineage-17.1-treble_a64-bgS_to_MECOOL BB2 PRO_by_sergej_a_g.img (with Gapps )

https://yadi.sk/d/5Rgv8QcntO_MGg

Acknowledgments:

@phhusson, @AndyCGYan and Treble community


2020-13-10

lineage-17.1 Android 10 AOSP Arm64to MECOOL BB2 PRO

WiFi and bluetooth.
The stock control panel turns the set-top box on and off,
Lan 1000 works.

Console does not turn on from the remote control
Bluetooth headphones connect and work, but when viewing the connection settings, these settings are crashed.

After starting, we swipe up from the bottom to unlock the screen. Otherwise, the console will fall asleep in a minute.
In the settings, the "Screen" item, we change the idle time before the console goes to sleep.

https://4pda.ru/forum/index.php?show...64998&st=19580


lineage-17.1-treble_arm64_bvS_to_MECOOL BB2 PRO_by_sergej_a_g_v2.7z

https://yadi.sk/d/IfNCtmMZZo9PzA

GAPPS (ARM64-Android 10-Micro?) are installed separately from here.


2020-07-08
Dev: Vasily Shevchuk

Info: (with subtitles )

https://youtu.be/cMPdpTJ75wA

Android 10 to Mecool BB2 Pro -2020-09-13:
https://mega.nz/file/fIcBXCBY#RTtLXh1zBKsS6YQbmQI_OkAdnaEghhxOrK5MvDeqG 2M

Really good contributions, the firmware is a bit damp (raw , "a work in progress")


2020-15-10
Dev: Q8pro

Lineage-17.1 Android 10 AOSP with gapps


(Install from SD Card)
https://yadi.sk/d/3VNI0Pg1_KYfCA

[ReaperMan]

Reserved

[ppromo47]

I have tried the one posted by sergej_a_g on 4PDA, both A11 and A10, both worked perfect on my device, only if it was ATV ROM would have stick to it

Android 11 AOSP to MECOOL BB2 PRO

https://4pda.ru/forum/index.php?showtopic=764998&view=findpost&p=100305862

Scroll one page ahead and you will find lineage-17.1 Android 10 AOSP to MECOOL BB2 PRO from the same dev


I just had to unpack the Rom, apply LPRAM patch and repack it, worked on my TX92 S912 3GB/32GB LP RAM device... cheers

[Kamengc]

any 64bit ATV11 version for H96pro to test? I cannot wait to try it out.

[ReaperMan]

I have not seen anything new. The Mecool BB2 Pro is very similar to H96 Pro+; I do not know how well that would work with the H96 Pro.
Android 10 has a couple of firmwares, "work in progress", that may be developed first?

[ReaperMan]

lineage-17.1-treble_arm64_bvS_to_MECOOL BB2 PRO_by_sergej_a_g_v2.7z

https://yadi.sk/d/IfNCtmMZZo9PzA

[12brian81]

Disregard. I don't see where I can delete a post.

[ppromo47]

lineage-17.1-treble_arm64_bvS_to_MECOOL BB2 PRO_by_sergej_a_g_v2.7z

https://yadi.sk/d/IfNCtmMZZo9PzA

Phhusson has released latest version of treble build, I don't have access but can you ask Sergey to try ATV version with latest build?

[ppromo47]

Any news on A10 progress, I heard google now need AV1 codec A10 onwards, I hope that wont block the progress

[koruma4949]

H96 pro plus android 10 lazım

[ReaperMan]

Android 9 is stable and works well. (I think....only 10bit x265 or AV1 encodes ( level/profile?) can have problems?) .

[koruma4949]

I need h96 pro plus android 9.

[koruma4949]

i need h96 pro plus android 9. I cannot find the software. thanks

[mAtvXk]

h**ps://slimboxtv.ru/h96-pro-plus/

[koruma4949]

android 10 error