Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Look for boxtv A95x S912 A2 ROM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Look for boxtv A95x S912 A2 ROM

    A1_s912_v3_1 20170117//////A1s912(A2) 3G/32


    Last edited by feras1989; 22 December 2020, 01:03.

    #2
    ?????

    Comment


      #3
      Originally posted by feras1989 View Post
      Maybe Try Search Engine

      Big GooooooooooooooooooooooA1_s912_v3_1 20170117//////A1s912(A2) 3G/32

      Add Factory Firmware to the end

      See where you are Directed Too




      Comment


        #4
        Device is suspended when you boot up, you downloaded ROMs and are not compatible Thank you

        Comment


          #5
          Is there any help?

          Comment


            #6
            Nexbox A95X A2



            Lots of firmware! Below is option for Android 9

            Should work for your China Box. (I think android 7 bootloader/firmware should be applied first to your box)
            Make sure you know how to Unbrick your China Box before testing. Read everything..before jumping in.

            Android 9
            Dev:tehcno
            https://4pda.ru/forum/index.php?show...40#entry997191 13

            Slimbox-ATV-TANIX-TX92-Qualcomm_QCA9377_1000-ver10.2


            Slimbox-AOSP-TANIX-TX92-Qualcomm_QCA9377_1000-ver10.2





            WiFi works very fast.
            Ethernet: Untested
            Bluetooth: Does turn on..untested
            USB: Hard drive transfer was 14 MBs (tested at setup). After a few reboots..or system setting- average 250KB up to 4 MB transfers.....
            Playstore: Did not properly see my purchased apps until restored by Titanium Backup.
            Viper4Android: Missing codecs and still must be turned on after reboot. Sound is great and Extra Loud is deafening.

            Remote:..Turns box, on anything else..untested
            Air Mouse: Rii i8+(2019) required sc keylayout files to work properly.
            TWRP: Untested but may require recovery patch to install(dev).
            Backdrop: Occasionally will send no signal..my Vizio TV shuts off after several minutes. China box is still running.
            CEC: Turned off: But must turn off TV and then immediately China Box, or box will reboot. Turn on TV- China Box starts up.

            Comment


              #7
              Software does not match. With this device I upgraded it but it stops when flashing.
              Thank you

              Comment


                #8
                Did you flash Android 7 first, (simplest way to get "Bootloader"?

                Then update to Android 9 (Uncheck "Erase Bootloader"?

                Either way 4pda link is for your China box, lots of Firmware there.

                Comment

                Working...
                X