** ROM ** Polaroid AS10 ** ROOTED + TWRP**

[bigronnich01]

Are you using the Phoenix suite version I have up on the board? It comes with the proper driver install package.

As soon as I get some time I will put together a better custom driver package.


Sent from Tapatalk for iPhone

didnt see one on the board i was using phoenix suite 1.0.4 but im not sure if im setup right after all I have been reading to flash they say the tablets has to be powered off and in usb storage mode I can not seem to get the tablet to that point i have done a hand full of rooting and flashing but this one has me stumped

[guessyet]

didnt see one on the board i was using phoenix suite 1.0.4 but im not sure if im setup right after all I have been reading to flash they say the tablets has to be powered off and in usb storage mode I can not seem to get the tablet to that point i have done a hand full of rooting and flashing but this one has me stumped

With the tablet completely turned off.... unplug the usb cable from the tablet.. press and hold the volume down button... with the volume down button pressed - plug the usb cable into the tablet.. this will bring the tablet up into flash mode...

[bigronnich01]

With the tablet completely turned off.... unplug the usb cable from the tablet.. press and hold the volume down button... with the volume down button pressed - plug the usb cable into the tablet.. this will bring the tablet up into flash mode...

ok going to give that a try (fingers crossed) get back to you in a bit thanks

[bigronnich01]

ok going to give that a try (fingers crossed) get back to you in a bit thanks

I just cannot get this tablet in flash mode I tried holding the vol down and connecting usb cable then i tried holding vol up and connecting usb cable and still nothing i am confused to what im doing wrong any other helpful tips ill try them all :-)

[guessyet]

I just cannot get this tablet in flash mode I tried hg the vol down and connecting usb cable then i tried holding vol up and connecting usb cable and still nothing i am confused to what im doing wrong any other helpful tips ill try them all :-)

you should have been able to get into flash mode... the screen will not come on in this mode.. there will be no signs of the tablet actually being on... the only thing that will let you know it is in FEL mode is a device will show up in the device manager or with phoenix suite running with a rom selected .. phoenix suite will ask if you want to do a format upgrade or normal upgrade...

[etag]

tut?

can i get a basic tut on this?

like install what then what? and purpose of phoenix suite?

[bigronnich01]

you should have been able to get into flash mode... the screen will not come on in this mode.. there will be no signs of the tablet actually being on... the only thing that will let you know it is in FEL mode is a device will show up in the device manager or with phoenix suite running with a rom selected .. phoenix suite will ask if you want to do a format upgrade or normal upgrade...

thank you for sticking with me ill give that a try

[bigronnich01]

you should have been able to get into flash mode... the screen will not come on in this mode.. there will be no signs of the tablet actually being on... the only thing that will let you know it is in FEL mode is a device will show up in the device manager or with phoenix suite running with a rom selected .. phoenix suite will ask if you want to do a format upgrade or normal upgrade...

i am still having a problem flashing recovery i just want to run the teblet info by you to make sure this procedure will work
model-a/s10
soc chip super dual core a20
android 4.2.2
kernel 1.0.0
build number as10-20130827
when running phoenixsuite it still says no device

[bigronnich01]

guessyet.

i am still having a problem flashing recovery i just want to run the teblet info by you to make sure this procedure will work
model-a/s10
soc chip super dual core a20
android 4.2.2
kernel 1.0.0
build number as10-20130827
when running phoenixsuite it still says no device

finally got it to work bad usb cable go figure...thank you for everything

[jimn2tdi]

As of 1/24/14 Polaroid has posted a new firmware update for the A/S series tablets with Google Play. This one seems a little better.

[guessyet]

As of 1/24/14 Polaroid has posted a new firmware update for the A/S series tablets with Google Play. This one seems a little better.

Im downloading them now to see any changes.. I will report back when I get a chance to look them over..

[bigronnich01]

As of 1/24/14 Polaroid has posted a new firmware update for the A/S series tablets with Google Play. This one seems a little better.

Guessyet. Any verdict on new polaroid firmware?

[guessyet]

Guessyet. Any verdict on new polaroid firmware?

they are pretty much the same as the old ones.. except for a different bootloader image with a big S in it.. same kernel with 4.2.2.. it does seem as if southern telco cleaned up their code when compiling it.. but there is no major enhancements that i have found..

I have been torn on time lately because as Electrik stated.. we are working on bringing kitkat to the polaroid devices.. So i have been spending most of my time on doing so.. lol.. its not a quick process .. however, i think most would rather have cm11 than the latest polaroid rom running 4.2.2 with break-fix additions..

I do have cm11(very much a pre-release) built for the devices and I am working on polishing the kernel.. I have been editing the kernel sources to include the latest sources for the hardware (such as the latest mali sources)..

Hopefully, cm11 will be complete for these devices soon..

[bigronnich01]

they are pretty much the same as the old ones.. except for a different bootloader image with a big S in it.. same kernel with 4.2.2.. it does seem as if southern telco cleaned up their code when compiling it.. but there is no major enhancements that i have found..

I have been torn on time lately because as Electrik stated.. we are working on bringing kitkat to the polaroid devices.. So i have been spending most of my time on doing so.. lol.. its not a quick process .. however, i think most would rather have cm11 than the latest polaroid rom running 4.2.2 with break-fix additions..

I do have cm11(very much a pre-release) built for the devices and I am working on polishing the kernel.. I have been editing the kernel sources to include the latest sources for the hardware (such as the latest mali sources)..

Hopefully, cm11 will be complete for these devices soon..

look forward to cm11 for this tablet ,thanks for your time and effort wish i could learn to do this myself..

[jimn2tdi]

they are pretty much the same as the old ones.. except for a different bootloader image with a big S in it.. same kernel with 4.2.2.. it does seem as if southern telco cleaned up their code when compiling it.. but there is no major enhancements that i have found..

I have been torn on time lately because as Electrik stated.. we are working on bringing kitkat to the polaroid devices.. So i have been spending most of my time on doing so.. lol.. its not a quick process .. however, i think most would rather have cm11 than the latest polaroid rom running 4.2.2 with break-fix additions..

I do have cm11(very much a pre-release) built for the devices and I am working on polishing the kernel.. I have been editing the kernel sources to include the latest sources for the hardware (such as the latest mali sources)..

Hopefully, cm11 will be complete for these devices soon..

Great news, we eagerly await its release. Thanks for all your efforts.