[ROM] H96 PRO+ SHMOD 7.1.2 (DDR3/DDR4)

[noxx2]

update: flash the image to sdcard with Burn_Card_Maker.exe
restart and upgrade
but now, black screen. only power light is on

help, please

[bumerc]

Congratulations, you installed a firmware whose bootloader does not support LPDDR3 memory. Look for instructions for shorting the emmc pins and the correct firmware.

[frenkovka]

Can somebody explain me why none of the shmod images work on my CZ-S32-V2.2? Is it because it's not actual Alfawise but unbranded?
I'm trying to flash through sd card, but it fails with each one of the three provided. I get an android logo with red cross halfway through which obviously means it fails.

Thanks

[marcoscreiodeus]

i tested k4 on my S32-v3 (DDR4) with usb burning tool and my box was bricked , i'm lucky ,i found this video https://www.youtube.com/watch?v=Hgw4S6RgRBE and i'm unbricked ....warning for all

It's good to know that my video is helping people.

[natzen]

It's good to know that my video is helping people.

thanks for the video !

[KodiLoaded]

This firmware runs fantastic on the Probox2 Air Plus ( DDR4 ), However the remote no longer works ( Including IR Power Button ) Is there someone or some way this could be fixed would be a great addition to this box ?

[trychlik]

hi, does this rom powers usb in standby/off mode? because of usb bluetooth remote
(now im using celerons rom, but when standby/off, usb goes off too, so i need to power on with ir remote and then use bluetooth)
thanks

[veljazlee]

How to install this rom on gt1 standard? Some mac address error apears during instalation.

[ReaperMan]

***If you are sure this firmware is for you?***
You give little info....
Do you mean this error: mac error license

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/alfawise/716421-how-to-recover-bricked-alfawize-h96-pro-zh01-s912-tvbox-v2-0-green

Newest burn tool should have all licenses included, if you are still stuck you can try these or find another license.zip to extract to your computer.

https://forum.freaktab.com/filedata/fetch?id=716423

https://mega.nz/#!o8w0nKYR!J4_6kjS3j6TsgE1Ytl12OnnHnu8aCHb1AKppmh8xVD0

Extract and copy the contents to the "license" folder where the Amlogic USB Burning Tool was installed to. This is usually "C:\Program Files (x86)\Amlogic\USB_Burning_Tool\license".

Different Firmware links:

https://mega.nz/#F!8qhRRaYJ!2ZA3VLjvLT6wg0IwsTF27g

https://yadi.sk/d/9J-JpwkF3L5SaA

Any operation you do is your responsibility...I just provided links for you.

[Usyusy]

While installing through USB Burning Tool V 2.0.8, "aml_7.1.2_s912_q9377-H96PROPLUS_mac-20180409_shmod-k4-stockbl" i got this error "USB Control setup error" on my bricked 3/32 GB, H96 pro plus {(Board printed as: CZ-S32-V3(DDR4)-2016-12-15(A15)}
red light glows when i connect usb cable to laptop. ,.,.,.,.,.,Any guidance, support please from the honorable experts.

Log::
[11:00:25 051][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[11:00:25 059][Global][Inf]--Scan usb device
[11:00:25 059][Global][Inf]--Aml scan WorldCup Device
[11:00:25 059][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:00:25 059][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_07921028& rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:00:25 059][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&408b22d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:00:25 059][Global][Inf]-------->[Port0]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port1]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port2]Other device
[11:00:25 059][Global][Inf]-------->[Port3]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port4]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port5]Other device
[11:00:25 059][Global][Inf]-------->[Port6]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port7]Other device
[11:00:25 059][Global][Inf]-------->[Port8]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port9]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port10]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port11]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port12]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port13]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port14]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port15]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port16]NoDeviceConnected
[11:00:25 059][Global][Inf]-------->[Port17]NoDeviceConnected
[11:00:25 059][Global][Inf]--Scan USB host controller complete
[11:00:25 059][Global][Inf]--Update data center with HubMap
[11:00:25 059][Global][Inf]--Update hub1 device data
[11:00:25 059][Global][Inf]--Update HUB1-1
[11:00:25 059][HUB1-1][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-2
[11:00:25 059][HUB1-2][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-3
[11:00:25 059][HUB1-3][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-4
[11:00:25 059][HUB1-4][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-5
[11:00:25 059][HUB1-5][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-6
[11:00:25 059][HUB1-6][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-7
[11:00:25 059][HUB1-7][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-8
[11:00:25 059][HUB1-8][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-9
[11:00:25 059][HUB1-9][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-10
[11:00:25 059][HUB1-10][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-11
[11:00:25 059][HUB1-11][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-12
[11:00:25 059][HUB1-12][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-13
[11:00:25 059][HUB1-13][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-14
[11:00:25 059][HUB1-14][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-15
[11:00:25 059][HUB1-15][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-16
[11:00:25 059][HUB1-16][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-17
[11:00:25 059][HUB1-17][Inf]--Update device path
[11:00:25 059][Global][Inf]--Update HUB1-18
[11:00:25 059][HUB1-18][Inf]--Update device path
[11:00:27 611][Global][War]--User click stop button
[11:00:27 611][Global][Inf]--Enable burning 0
[11:00:29 699][Global][War]--Close tool
[11:00:30 206][Global][Inf]--Burning thread HUB1-1 end run
[11:00:30 206][Global][Inf]--Burning thread HUB1-1 exit
[11:00:30 722][Global][War]--Controler exit
[11:44:26 762][Global][Inf]--Scan usb device
[11:44:26 762][Global][Inf]--Aml scan WorldCup Device
[11:44:26 770][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:26 770][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_07921028& rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:26 770][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&408b22d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:26 770][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port2]Other device
[11:44:26 770][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port5]Other device
[11:44:26 770][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port7]Other device
[11:44:26 770][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port12]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port13]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port14]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port15]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port16]NoDeviceConnected
[11:44:26 770][Global][Inf]-------->[Port17]NoDeviceConnected
[11:44:26 770][Global][Inf]--Scan USB host controller complete
[11:44:26 770][Global][Inf]--Update data center with HubMap
[11:44:32 835][Global][Inf]--User click open button
[11:44:38 380][Global][Inf]--Image path C:\Users\HAFIZ\Desktop\roms\aml_7.1.2_s912_q9377-H96PROPLUS_mac-20180409_shmod-k4-stockbl.img
[11:44:42 382][Global][Inf]--Parsing burning package
[11:44:42 382][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[11:44:42 382][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xm l
[11:44:42 390][Global][Inf]--Get burning key
[11:44:48 278][Global][Inf]--User click start button
[11:44:48 278][Global][Inf]--SetErase
[11:44:48 278][Global][Inf]--Enable burning 1
[11:44:48 278][Global][Inf]--Scan usb device
[11:44:48 278][Global][Inf]--Aml scan WorldCup Device
[11:44:48 278][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:48 278][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_07921028& rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:48 278][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&408b22d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:48 278][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port2]Other device
[11:44:48 278][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port5]Other device
[11:44:48 278][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port7]Other device
[11:44:48 278][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port12]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port13]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port14]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port15]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port16]NoDeviceConnected
[11:44:48 278][Global][Inf]-------->[Port17]NoDeviceConnected
[11:44:48 278][Global][Inf]--Scan USB host controller complete
[11:44:48 278][Global][Inf]--Update data center with HubMap
[11:46:42 931][Global][Inf]--Catch DBT_DEVICEARRIVAL
[11:46:42 931][Global][Inf]--Scan usb device
[11:46:42 931][Global][Inf]--Aml scan WorldCup Device
[11:46:42 931][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:46:42 931][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_07921028& rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:46:42 931][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&408b22d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:46:42 931][Global][Inf]-------->[Port0]NoDeviceConnected
[11:46:42 931][Global][Inf]-------->[Port1]\\?\usb#vid_1b8e&pid_c003#5&1ae3a7ce&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:46:42 939][Global][Inf]-------->[Port2]Other device
[11:46:42 939][Global][Inf]-------->[Port3]NoDeviceConnected
[11:46:42 939][Global][Inf]-------->[Port4]NoDeviceConnected
[11:46:42 939][Global][Inf]-------->[Port5]Other device
[11:46:42 939][Global][Inf]-------->[Port6]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port7]Other device
[11:46:42 947][Global][Inf]-------->[Port8]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port9]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port10]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port11]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port12]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port13]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port14]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port15]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port16]NoDeviceConnected
[11:46:42 947][Global][Inf]-------->[Port17]NoDeviceConnected
[11:46:42 947][Global][Inf]--Scan USB host controller complete
[11:46:42 947][Global][Inf]--Update data center with HubMap
[11:46:42 947][Global][Inf]--Insert new hub1
[11:46:42 948][Global][Inf]--Update hub1 device data
[11:46:42 948][Global][Inf]--Update HUB1-1
[11:46:42 948][HUB1-1][Inf]--Update device path
[11:46:42 948][Global][Inf]--Update HUB1-2 \\?\usb#vid_1b8e&pid_c003#5&1ae3a7ce&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:46:42 948][HUB1-2][Inf]--Update device path
[11:46:42 948][Global][Inf]--Begin thread for HUB1-2
[11:46:42 949][Global][Inf]--Burning thread HUB1-2 start
[11:46:42 949][Global][Inf]--Update HUB1-3
[11:46:42 949][HUB1-3][Inf]--Update device path
[11:46:42 949][Global][Inf]--Burning thread HUB1-2 begin run
[11:46:42 949][Global][Inf]--Update HUB1-4
[11:46:42 949][HUB1-4][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-5
[11:46:42 949][HUB1-5][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-6
[11:46:42 949][HUB1-6][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-7
[11:46:42 949][HUB1-7][Inf]--Update device path
[11:46:42 949][HUB1-2][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&1ae3a7ce&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000008cc
[11:46:42 949][Global][Inf]--Update HUB1-8
[11:46:42 949][HUB1-8][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-9
[11:46:42 949][HUB1-9][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-10
[11:46:42 949][HUB1-10][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-11
[11:46:42 949][HUB1-11][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-12
[11:46:42 949][HUB1-12][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-13
[11:46:42 949][HUB1-13][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-14
[11:46:42 949][HUB1-14][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-15
[11:46:42 949][HUB1-15][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-16
[11:46:42 949][HUB1-16][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-17
[11:46:42 949][HUB1-17][Inf]--Update device path
[11:46:42 949][Global][Inf]--Update HUB1-18
[11:46:42 949][HUB1-18][Inf]--Update device path
[11:46:43 002][HUB1-2][Inf]--CloneImageProxy
[11:46:43 002][HUB1-2][Inf]--Connect path=USB xHCI Compliant Host Controller/P0/P1
[11:46:43 002][HUB1-2][Inf]--Start burning...
[11:46:43 060][HUB1-2][Inf]--------------ERASE BOOTLOADER------------
[11:46:43 060][HUB1-2][Inf]--2-2-0-0
[11:46:43 060][HUB1-2][Inf]-------------Download DDR.USB-----------
[11:46:43 060][HUB1-2][Inf]--2-2-0-0
[11:46:43 060][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[11:46:43 566][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[11:46:44 073][HUB1-2][Inf]--Write initial succeed
[11:46:44 073][HUB1-2][Inf]--Upload encrypt at 0xc8100228
[11:46:44 075][HUB1-2][Inf]--ulValue = 0xadfc318c
[11:46:44 075][HUB1-2][Inf]--Read encrypt value succeed
[11:46:44 185][HUB1-2][Inf]--Transfer complete
[11:46:44 188][HUB1-2][Inf]--Run at address 0xd9000000
[11:46:44 192][HUB1-2][Inf]--RunInRam succeed
[11:46:44 255][HUB1-2][Inf]--IOCTL_IDENTIFY_HOST_Handler ret=-5 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: A device attached to the system is not functioning.


[11:46:44 255][HUB1-2][Err]--CheckFileRunState failed
[11:46:44 255][HUB1-2][Inf]--Failure : 1, FailureMax : 3
[11:46:44 274][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[11:46:44 274][Global][Inf]--Scan usb device
[11:46:44 274][Global][Inf]--Aml scan WorldCup Device
[11:46:44 276][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:46:44 276][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_07921028& rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:46:44 276][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&408b22d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:46:44 277][Global][Inf]-------->[Port0]NoDeviceConnected
[11:46:44 277][Global][Inf]-------->[Port1]NoDeviceConnected
[11:46:44 277][Global][Inf]-------->[Port2]Other device
[11:46:44 278][Global][Inf]-------->[Port3]NoDeviceConnected
[11:46:44 278][Global][Inf]-------->[Port4]NoDeviceConnected
[11:46:44 278][Global][Inf]-------->[Port5]Other device
[11:46:44 278][Global][Inf]-------->[Port6]NoDeviceConnected
[11:46:44 279][Global][Inf]-------->[Port7]Other device
[11:46:44 279][Global][Inf]-------->[Port8]NoDeviceConnected
[11:46:44 279][Global][Inf]-------->[Port9]NoDeviceConnected
[11:46:44 279][Global][Inf]-------->[Port10]NoDeviceConnected
[11:46:44 280][Global][Inf]-------->[Port11]NoDeviceConnected
[11:46:44 280][Global][Inf]-------->[Port12]NoDeviceConnected
[11:46:44 280][Global][Inf]-------->[Port13]NoDeviceConnected
[11:46:44 280][Global][Inf]-------->[Port14]NoDeviceConnected
[11:46:44 280][Global][Inf]-------->[Port15]NoDeviceConnected
[11:46:44 280][Global][Inf]-------->[Port16]NoDeviceConnected
[11:46:44 280][Global][Inf]-------->[Port17]NoDeviceConnected
[11:46:44 280][Global][Inf]--Scan USB host controller complete
[11:46:44 280][Global][Inf]--Update data center with HubMap
[11:46:44 280][Global][Inf]--Update hub1 device data
[11:46:44 280][Global][Inf]--Update HUB1-1
[11:46:44 280][HUB1-1][Inf]--Update device path
[11:46:44 280][Global][Inf]--Update HUB1-2
[11:46:44 280][HUB1-2][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-3
[11:46:44 281][HUB1-3][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-4
[11:46:44 281][HUB1-4][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-5
[11:46:44 281][HUB1-5][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-6
[11:46:44 281][HUB1-6][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-7
[11:46:44 281][HUB1-7][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-8
[11:46:44 281][HUB1-8][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-9
[11:46:44 281][HUB1-9][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-10
[11:46:44 281][HUB1-10][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-11
[11:46:44 281][HUB1-11][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-12
[11:46:44 281][HUB1-12][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-13
[11:46:44 281][HUB1-13][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-14
[11:46:44 281][HUB1-14][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-15
[11:46:44 281][HUB1-15][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-16
[11:46:44 281][HUB1-16][Inf]--Update device path
[11:46:44 281][Global][Inf]--Update HUB1-17
[11:46:44 281][HUB1-17][Inf]--Update device path
[11:46:44 282][Global][Inf]--Update HUB1-18
[11:46:44 282][HUB1-18][Inf]--Update device path
[11:46:44 609][Global][Inf]--Catch DBT_DEVICEARRIVAL
[11:46:44 609][Global][Inf]--Scan usb device
[11:46:44 610][Global][Inf]--Aml scan WorldCup Device
[11:46:44 611][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:46:44 611][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_07921028& rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:46:44 611][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&408b22d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:46:44 612][Global][Inf]-------->[Port0]NoDeviceConnected
[11:46:44 613][Global][Inf]-------->[Port1]\\?\usb#vid_1b8e&pid_c003#5&1ae3a7ce&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:46:44 614][Global][Inf]-------->[Port2]Other device
[11:46:44 614][Global][Inf]-------->[Port3]NoDeviceConnected
[11:46:44 614][Global][Inf]-------->[Port4]NoDeviceConnected
[11:46:44 615][Global][Inf]-------->[Port5]Other device
[11:46:44 615][Global][Inf]-------->[Port6]NoDeviceConnected
[11:46:44 616][Global][Inf]-------->[Port7]Other device
[11:46:44 616][Global][Inf]-------->[Port8]NoDeviceConnected
[11:46:44 616][Global][Inf]-------->[Port9]NoDeviceConnected
[11:46:44 616][Global][Inf]-------->[Port10]NoDeviceConnected
[11:46:44 616][Global][Inf]-------->[Port11]NoDeviceConnected
[11:46:44 616][Global][Inf]-------->[Port12]NoDeviceConnected
[11:46:44 616][Global][Inf]-------->[Port13]NoDeviceConnected
[11:46:44 617][Global][Inf]-------->[Port14]NoDeviceConnected
[11:46:44 617][Global][Inf]-------->[Port15]NoDeviceConnected
[11:46:44 617][Global][Inf]-------->[Port16]NoDeviceConnected
[11:46:44 617][Global][Inf]-------->[Port17]NoDeviceConnected
[11:46:44 617][Global][Inf]--Scan USB host controller complete
[11:46:44 617][Global][Inf]--Update data center with HubMap
[11:46:44 617][Global][Inf]--Update hub1 device data
[11:46:44 617][Global][Inf]--Update HUB1-1
[11:46:44 618][HUB1-1][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-2 \\?\usb#vid_1b8e&pid_c003#5&1ae3a7ce&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:46:44 618][HUB1-2][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-3
[11:46:44 618][HUB1-3][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-4
[11:46:44 618][HUB1-4][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-5
[11:46:44 618][HUB1-5][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-6
[11:46:44 618][HUB1-6][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-7
[11:46:44 618][HUB1-7][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-8
[11:46:44 618][HUB1-8][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-9
[11:46:44 618][HUB1-9][Inf]--Update device path
[11:46:44 618][Global][Inf]--Update HUB1-10
[11:46:44 619][HUB1-10][Inf]--Update device path
[11:46:44 619][Global][Inf]--Update HUB1-11
[11:46:44 619][HUB1-11][Inf]--Update device path
[11:46:44 619][Global][Inf]--Update HUB1-12
[11:46:44 619][HUB1-12][Inf]--Update device path
[11:46:44 619][Global][Inf]--Update HUB1-13
[11:46:44 619][HUB1-13][Inf]--Update device path
[11:46:44 619][Global][Inf]--Update HUB1-14
[11:46:44 619][HUB1-14][Inf]--Update device path
[11:46:44 619][Global][Inf]--Update HUB1-15
[11:46:44 619][HUB1-15][Inf]--Update device path
[11:46:44 619][Global][Inf]--Update HUB1-16
[11:46:44 619][HUB1-16][Inf]--Update device path
[11:46:44 619][Global][Inf]--Update HUB1-17
[11:46:44 619][HUB1-17][Inf]--Update device path
[11:46:44 619][Global][Inf]--Update HUB1-18
[11:46:44 619][HUB1-18][Inf]--Update device path
[11:46:44 755][HUB1-2][Err]--[11:46:44 755][HUB1-2][Inf]--Failure : 2, FailureMax : 3
[11:46:45 262][HUB1-2][Err]--[11:46:45 262][HUB1-2][Inf]--Failure : 3, FailureMax : 3
[11:46:45 308][HUB1-2][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[11:46:45 308][HUB1-2][Inf]--Close device handle 0x000008cc