Blacklist of locked Down Version´s of RK3188 CPU

[unaszplodrmann]

Hm. You are not a reprasentive of Rockship?
Okay, I'm kidding.

I previously said Rockchip were clearly being devious with regard to the RK3188T. Remember? You defended them in response... Are you a representative of Rockchip?

And I replace the word fraud with two words: clever business. Sounds more friendly.

I still prefer 'devious', myself.

But let me know, when you found the Model T with specifications on the homepage of Rockship.

Let me know when your sarcasm becomes appropriate.

[JDfense]

I'm on it, too.

First success with Wasser kitkat ROM and ut1 stock kernel.
Full booting, no wifi, no bt, no ethernet and a bad screen size or bad flickering with some of the resolutions.. If I find not a better combination, you get the dmesg from this.

JDfense

[d33]

Can boot KK using kernel-ut1.img from wasser KK rom, and using 2-3 custom minix x7 roms!
Cannot boot KK with ANY other kernel!

P.S: Your last 6210 no override kernel, gives me distortion on boot animation and then reboor. NO BOOT again :-(

So it seems the best route for CS968 support is to approach Wasser. He is aware of the override methods.

[dracosc22679]

Can boot KK using kernel-ut1.img from wasser KK rom, and using 2-3 custom minix x7 roms!
Cannot boot KK with ANY other kernel!

P.S: Your last 6210 no override kernel, gives me distortion on boot animation and then reboor. NO BOOT again :-(

[d33]

Shall i also post DMESG of my CS968 booting KitKat using UT1 and minix X7 kernels (wifi no working) ?

Yes, please.

For clarity.

1. You can boot your CS968 into Kitkat with custom kernels from Wasser or stock kernels from Minix?
2. You can/can't boot your CS968 into KitKat using my kernels?

[dracosc22679]

Shall i also post DMESG of my CS968 booting KitKat using UT1 and minix X7 kernels (wifi no working) ?

[d33]

Blacklist of locked Down Version´s of RK3188 CPU

If and when you find a Kitkat kernel that boots then post the DMESG and I can build an override for you


Sent from my iPhone using Tapatalk

[JDfense]

Yes, I checked it again today. finless kitkat beta does loop with or without your kernels for kitkat.
Maybe I need another kitkat rom.
I will check the minix x7 kitkat now again.

JDfense

[d33]

Yes, of course it is one of the stock ROMs 4.22 for ap6210 cs968 with 720p and upscaled (I think) 1080p.

Or you mean something else with the two display controller. The cs968 has a hdmi and AV out.

JDfense

So when you said none of MY KK kernels boot you meant no KK kernel boots?

Have you ever installed a KitKat ROM and had it boot?

[JDfense]

This kernel uses dual display


<6>[ 0.531144] lcdc0 is used as external display device contoller!
<6>[ 0.537768] lcdc1 is used as primary display device controller!

... and is a jelly bean kernel? It certainly isn't built with the KK sources leaked

I can see it has been built with "T" frequencies:

• ddrfreq: normal 456MHz video 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 222MHz
• mali freq table :Mali: 128,Mali: 179,Mali: 223,Mali: 297,Mali: 297,Mali: 446,Mali:

So 1.4/446/460 same as the limits in the leaked KK beta sources.

Yes, of course it is one of the stock ROMs 4.22 for ap6210 cs968 with 720p and upscaled (I think) 1080p.

Or you mean something else with the two display controller. The cs968 has a hdmi and AV out.

JDfense

[d33]

Any future people that test all I think we need to know is the fastest stable kernel and the leakage level from DMESG

Digger: 1.6 GHz with leakage level 6000
valzja: 1.6 GHz with leakage level 6000
mikele: 1.6 GHz with leakage level 4000
Norbert6: 1.7 GHz with leakage level 4000

dracosc22679: 1.6Ghz (460MHz RAM) with leakage level 5000

[d33]

I understood. I have posted you the dmesg before. Here...

http://www.mediafire.com/view/78up1o3xudgfxfk/dmesg_cs968__720p_locked_1.42Kernel.txt

None of your kitkat kernels booted complete, but I'll check it again.
If anything will boot complet, I'll send the dmesg.
Thx, d33.

JDfense

This kernel uses dual display


<6>[ 0.531144] lcdc0 is used as external display device contoller!
<6>[ 0.537768] lcdc1 is used as primary display device controller!

... and is a jelly bean kernel? It certainly isn't built with the KK sources leaked

I can see it has been built with "T" frequencies:

• ddrfreq: normal 456MHz video 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 222MHz
• mali freq table :Mali: 128,Mali: 179,Mali: 223,Mali: 297,Mali: 297,Mali: 446,Mali:

So 1.4/446/460 same as the limits in the leaked KK beta sources.

[JDfense]

Nope.

The lower binned units were given the T designation and were etched as such to avoid confusion. Rockchip clearly did not commit fraud. Some consumer device manufacturers and resellers are committing fraud, however. It is especially devious were the device manufacturer or reseller sold devices based on the T variant at the same retail price as units based on the standard RK3188, even though Rockchip sold them the T for less.

Hm. You are not a reprasentive of Rockship?
Okay, I'm kidding.
And I replace the word fraud with two words: clever business. Sounds more friendly.

But let me know, when you found the Model T with specifications on the homepage of Rockship.

JDfense

[JDfense]

JDefense has ANY KitKat kernel booted completely on your device? If so post the DMESG.

The kernel below is a test for another person but should do for you too. After you post the standard DMESG try this and post DMESG from this too.

NB. I haven't worked out how to override GPU yet. Too few people have provided output and I don't have a 'T' device nor unlimited time.

I understood. I have posted you the dmesg before. Here...

http://www.mediafire.com/view/78up1o3xudgfxfk/dmesg_cs968__720p_locked_1.42Kernel.txt

None of your kitkat kernels booted complete, but I'll check it again.
If anything will boot complet, I'll send the dmesg.
Thx, d33.

JDfense

[d33]

I asked similar question before.
Could you compile a kernel with only slightly clock increasement for the RAM and GPU. Let the cpu clock on 1.4GHz.
When this kernel will boot complete the cs968, we will have some proof that every T model could run with your T-model kitkat sources, even the weakest t-cpu.


JDfense ----> Nexus 7 ▶ 2013

JDefense has ANY KitKat kernel booted completely on your device? If so post the DMESG.

The kernel below is a test for another person but should do for you too. After you post the standard DMESG try this and post DMESG from this too.

NB. I haven't worked out how to override GPU yet. Too few people have provided output and I don't have a 'T' device nor unlimited time.