Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Blacklist of locked Down Version´s of RK3188 CPU

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • meklen
    replied
    sorry for bad english, D33, could you compile your kernel 18 ovveride to work with usb lan 88772b for mk908ii?

    Leave a comment:


  • meklen
    replied
    [QUOTE = d33; 154204] Я подозреваю, что ограничение GPU находится в прекомпилирована в драйвер Мали, что мы не имеем источника для. Вы можете проверить это, если хотите, чтобы доказать, что я правильно / неправильно. Найти на самом деле старый диск и захватить два Мали водителей от Sys / модулей, то переименовать те, в текущем диске и скопировать старые на их месте. Боб был будем смотреть на это тоже, но мы все много на, и незначительное увеличение GPU разница очень незначительна. [/ QUOTE]

    ​sorry for bad english, D33, could you compile your kernel 18 ovveride to work with usb lan 88772b for mk908ii?

    Leave a comment:


  • d33
    replied
    Originally posted by mikele View Post
    Hello d33

    What About increasing the frequency of the GPU for models "T" ? and incidentally, CPU voltage increasing for "T" models ?
    I suspect that GPU limitation is in the precompiled into the Mali driver that we don't have source for. You can test this out if you like to prove me right/wrong.

    Find a really old ROM and grab the two mali drivers from sys/modules, then rename the ones in your current ROM and copy the old ones in their place.

    Bob was going to look at this too but we've all a lot on, and a minor increase in GPU makes very little difference.

    Leave a comment:


  • mikele
    replied
    Hello d33

    What About increasing the frequency of the GPU for models "T" ? and incidentally, CPU voltage increasing for "T" models ?
    Last edited by mikele; 09 March 2014, 00:42.

    Leave a comment:


  • digger
    replied
    Originally posted by d33 View Post
    I removed as it was non-booting


    Sent from my iPhone using Tapatalk
    O.K. no problem.

    Leave a comment:


  • d33
    replied
    Blacklist of locked Down Version´s of RK3188 CPU

    I removed as it was non-booting


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • digger
    replied
    Originally posted by d33 View Post
    I did - Jdefense has already tested and it didn't boot. I'm going to get Lew20041 to help me build the kernels and the app.
    d33,
    O.K. but what kernel you were speaking about? Am I blind?

    Leave a comment:


  • d33
    replied
    Originally posted by digger View Post
    Hi d33,
    I would be glad to contribute for the test you ask about.
    What test kernel do you mean?
    Do you need it to be flashed with stock 4.2.2 (Jelly Bean) FW?
    I did - Jdefense has already tested and it didn't boot. I'm going to get Lew20041 to help me build the kernels and the app.

    Leave a comment:


  • digger
    replied
    Originally posted by d33 View Post
    Can someone that know's what they're doing with flashing kernels, flash this test 4.2.2 kernel and if it boots post me the DMESG? It is supposed to be a 'stock' TV Box Jelly Bean kernel but with my code to dump the eFuse registers. Flash your normal kernel back after the test.

    If it works we can detect T-kernels without having to open the box.

    Please dont flash this if you are not 100% happy about flashing and restoring your current 4.2.2. kernel for this quick test. Imagine the worst!

    I'm unable to run any test myself until Friday night and this is my first JB kernel.
    Hi d33,
    I would be glad to contribute for the test you ask about.
    What test kernel do you mean?
    Do you need it to be flashed with stock 4.2.2 (Jelly Bean) FW?

    Leave a comment:


  • d33
    replied
    Blacklist of locked Down Version´s of RK3188 CPU

    Drat. Thanks it'll have to wait to the weekend them
    Thanks


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • JDfense
    replied
    No, choice d33.
    Your JB kernel doesn't boot stock rom for cs968. Flashing was fine without error, after that formatting in the stockrecovery works, then reboot into black screen.

    JDfense

    Leave a comment:


  • JDfense
    replied
    I can do it.

    JDfense

    Leave a comment:


  • d33
    replied
    Can someone that know's what they're doing with flashing kernels, flash this test 4.2.2 kernel and if it boots post me the DMESG? It is supposed to be a 'stock' TV Box Jelly Bean kernel but with my code to dump the eFuse registers. Flash your normal kernel back after the test.

    If it works we can detect T-kernels without having to open the box.

    Please dont flash this if you are not 100% happy about flashing and restoring your current 4.2.2. kernel for this quick test. Imagine the worst!

    I'm unable to run any test myself until Friday night and this is my first JB kernel.
    Last edited by d33; 04 March 2014, 10:06.

    Leave a comment:


  • d33
    replied
    NEOMode's app doesn't work. I have his source code and I'll fix it but:

    1. I have a ridiculously long list of things people would like already
    2. Bob needs my support which comes first
    3. The hotel I'm staying in this week blocks the HDMI ports so I can't work on my hobby in the evenings

    Sorry all

    Leave a comment:


  • petro_ionut
    replied
    Re: Blacklist of locked Down Version´s of RK3188 CPU

    Originally posted by petro_ionut View Post
    Help me please, i have a mk908II, with NEOMODE's app says its real RK3188, but in kitkat finless 2.0, with no kernel i was able to get more than 1.4ghz. Can anyone tell me why, or witch kernel should i use? Thanks.

    Sent from my HTC One


    Sent from my HTC One

    Leave a comment:

Working...
X