Kit Kat 4.4.2 RK3066 (Fully Working)

[uniextra]

Bricked my device trying to install the OMA package. So, after unbricking and flashing bob's 1.7a, I'd like to try installing this rom again, but this time using seperate .img files.

Also, are there any "real" instructions for "properly" installing this ROM. I ask because the first post is a jumble of links, none with instructions and like I said, installing OMA bricked my device last time around, so I'd love to avoid the same outcome again.

I agree, i had to work extra to get this working.

for me a step by step wuld be:

1- Download Links
a- ROM https://mega.co.nz/#!6cJkWDDY!-VT74e...kqkTYcjPm_KVn4
b- Batch tool https://mega.co.nz/#!fJgADI6S!RBael7...XKqKSv_U903xGA

2- Disconect your device from Anything HDMI air remote etc.

3- Hitting reset button conect your device OTG micro USB to your machine and install drivers (Win8 allow unsigned drivers)

4- Open Batch tool and you will see your device recogniced as MaskROM

5- On batch tool, under "Upgrade firmware" select "firmware" (download A) and then hit Erasa Flash and after "Upgrade"

6- Now device should be flashed and able to boot and Android 4.4.2

7- Time to download CWM https://mega.co.nz/#!zNpiSTZB!DIy4BRWSmq29bJU66sSXvuPBxN3H-aHVlfLfglAWA8I

8- select (OMA / CrewRKTablets) CWM Recovery 6.0.3.1 for Android 4.4.2 KitKat on RK tablets (loader Gen2) in packages. Download and install, reboot. You must select the Oma package for full CWM compatibility.

9- Now i recomend installing the last Google Apps to be able to go ART http://forum.xda-developers.com/showthread.php?t=2397942 install by CWM with a keyboard connected using arrows to move


well this is out of my memorey, i flashed a couple weeks ago.. so i might be missing something... i would be nice if someone pastes this on the first page and correct if any error!

[chsmith1976]

Can someone please upload individual .img files for rkflashkit (original link is dead)

Bricked my device trying to install the OMA package. So, after unbricking and flashing bob's 1.7a, I'd like to try installing this rom again, but this time using seperate .img files.

Also, are there any "real" instructions for "properly" installing this ROM. I ask because the first post is a jumble of links, none with instructions and like I said, installing OMA bricked my device last time around, so I'd love to avoid the same outcome again.

[r0ottm]

I try this rom with my original MK808b (RK3066 chip, WF/BT RK903) but after flash room with Rockchip batch tool v1.7, boot ok but have a blinking screen with an small android in upper left corner (I think the initial setup screnn).
I try with Androidtool v2.1, erashing flash and upgrade the room, but same blinking screen after boot.
In bot cases I can enter into the settings and WiFi is disabled and NO bt by the way. There is no way that I can check any other thing because the blinkng screen.

Flashed BalintBanyasz KERNEL (http://www.freaktab.com/showthread.p...l=1#post214775), now boot OK, I can enable WiFi but the performance sucks (almos 5.000 lees in antutu).

Anybody have succes installing in MK808b the 4.4.2 room ???? (RK3066 chip, WF/BT RK903)

There is another room that I can try ???

Best regards.

Hi, I've been facing the same issue with my ug802, I figured out that the window that keeps spawning is located under /system/app/provision.apk and can safely be deleted. There are many ways of doing that, I'll just point out that you can access settings and google play from the upper drop down menus, which work normally, then you should have no problems rooting the device and deleting the file.

BTW Could anyone reupload the OC kernel? Preferably the cwm-flashable zip, since my device's been unable to enter the flash mode since last week, ending up in "mask room mode"(why, anyone? )instead, so I'm unable to flash kernel separately.

Thanks

[aldinezi]

Got it to install on my mk809ii(4.2) via batchtool. but the only problem I have is after a few hours it cuts out(goes black/powers off)been reading posts on here that the problem could be the charger/power adaptor, and as I'm using the adaptor that came with my stick.I read in one post I need a 3/3.5a 5v adaptor, so the hunt is on to find one in the U.K.tried Amazon and **** but no luck so far.anybody on here from the U.K. know where I can find one? If not,its back to 4.2

For me.. sometimes it last for few hours sometimes faster if I run some heavy apps/games. I was using USB port of my TV, and then switched it to a nearby router USB port.. I guess I have to find a right adaptor. I have also tried lowering the top limit for CPU freq at ~800 MHz... but it did not helped. It happens with the stock and with the 4pda ROM.

EDIT: After trying a brand new adapter with 3A and 5V, I got the same issue. Screen just freezes, stucks.. and it looks a little bit pixelated.

Any info regarding this problem, or solutions would be really appreciated? Thank you.

[ultimatexbmc]

Got it to install on my mk809ii(4.2) via batchtool. but the only problem I have is after a few hours it cuts out(goes black/powers off)been reading posts on here that the problem could be the charger/power adaptor, and as I'm using the adaptor that came with my stick.I read in one post I need a 3/3.5a 5v adaptor, so the hunt is on to find one in the U.K.tried Amazon and **** but no luck so far.anybody on here from the U.K. know where I can find one? If not,its back to 4.2

We have never had a problem using these on any Android device that is USB powered and I have been running my MK809II on this PSU for over 12 months with no issue.

http://www.****.co.uk/itm/Belkin-Uni...item19ebaa616e

[sam tyler]

Got it to install on my mk809ii(4.2) via batchtool. but the only problem I have is after a few hours it cuts out(goes black/powers off)been reading posts on here that the problem could be the charger/power adaptor, and as I'm using the adaptor that came with my stick.I read in one post I need a 3/3.5a 5v adaptor, so the hunt is on to find one in the U.K.tried Amazon and **** but no luck so far.anybody on here from the U.K. know where I can find one? If not,its back to 4.2

[KingSombra]

Hmmm. One thing I cannot seem to get to work at all is bluetooth.

Devices seem to pare correctly but do not work at all.

I wonder if the HID in the UG007 ROM is not correct or something.

I wouldnt have any idea on how to go about fixing that.

Would anyone have any ideas?

I backed up to the latest Rikomagic official ROM and bluetooth magically works.

So the UG007 ROM is definately NOT a perfect fit for a MK802IIISB with AP6210.

[rbthompsonv]

G18REF board?

Do you guys know if this will work on the MX clone with the G18REF board?

[KingSombra]

Thank you so much for pointing this one out. It runs smoothly on my mk802iiis(b) with ap6210.

I have been wanting to run kitkat on it, specifically because the new main bar gets out of the way when running KODI and the SPMC vesion of it. So far I have not had a screen problem, (knock on wood. )

Hmmm. One thing I cannot seem to get to work at all is bluetooth.

Devices seem to pare correctly but do not work at all.

I wonder if the HID in the UG007 ROM is not correct or something.

I wouldnt have any idea on how to go about fixing that.

Would anyone have any ideas?

[uniextra]

Location file is down... can anyone upload it again?

thanks!

[chsmith1976]

CWM: Download Arctools https://mega.co.nz/#!zNpiSTZB!DIy4BR...aHVlfLfglAWA8I and select (OMA / CrewRKTablets) CWM Recovery 6.0.3.1 for Android 4.4.2 KitKat on RK tablets (loader Gen2) in packages. Download and install, reboot. You must select the Oma package for full CWM compatibility.

Flashed the OMA CWM on my MK809II, but now I'm stuck in a bootloop into recovery, can't get back to Android, can't backup my current ROM, device not detected in Finless Bob's flash tool, adb inaccessible - total disaster. Any help would be greatly appreciated.

BTW, CWM can't mount anything, hence my apparent lack of options.

Bump...

[KingSombra]

ok showbox reinstalled and working.

the problem i have is on the root process

http://i59.tinypic.com/2e3su0y.png

I donwloaded kingroot
enabled USB to computer and debbuging
connected to PC with Kingroot running
it sees the stick, i hit ROOT and stays like this ages.. until stick reboots

http://i59.tinypic.com/2e3su0y.png

kingroots stays the same after stick reboots... as if it was doing something!
any ideas


EDIT: OK swaped to KingoRoot,
un rooted device first and after rooted agin, process goes well, shows finished screen and inmediatly device reboots, i go to rootchecker and not rooted!


EDIT2: Rooted ...

I can not seem to get kingo root to find I have my mk802iii connected.

EDIT: Never mind I got it. One thing no one seems to mention is that you not only need to turn on USB debugging, turn on connect to PC, but you ALSO need to drag down a message in the upper left and click on the connect message for it to work.

[uniextra]

ok showbox reinstalled and working.

the problem i have is on the root process

http://i59.tinypic.com/2e3su0y.png

I donwloaded kingroot
enabled USB to computer and debbuging
connected to PC with Kingroot running
it sees the stick, i hit ROOT and stays like this ages.. until stick reboots

http://i59.tinypic.com/2e3su0y.png

kingroots stays the same after stick reboots... as if it was doing something!
any ideas


EDIT: OK swaped to KingoRoot,
un rooted device first and after rooted agin, process goes well, shows finished screen and inmediatly device reboots, i go to rootchecker and not rooted!


EDIT2: Rooted ...

[uniextra]

after testing yesterday MK802IIIS runs greate on it.

Only problem found so far is Show Box app crashes.. i need an other good series streaming app

[KingSombra]

There's a firmware with an AP6210 kernel here that's working on my MK802IIIS: http://ugoos.net/index.php?route=pro...download_id=43
Unfortunately it's a bit unstable, every hour or so the screen will go dark (not turn off) and the device will hang requiring me to reboot it.

Is there a kernel source for RK3066 devices with kitkat available somewhere?

Thank you so much for pointing this one out. It runs smoothly on my mk802iiis(b) with ap6210.

I have been wanting to run kitkat on it, specifically because the new main bar gets out of the way when running KODI and the SPMC vesion of it. So far I have not had a screen problem, (knock on wood. )