Kit Kat 4.4.2 RK3066 (Fully Working)

[Shomari]

Same problem when I changed runtime to ART. Everytime I start the TV stick, it will spend a lot of time optimising installed apps for ART. I had to change the runtime back to dalvik as I was afraid all that optimising might kill the flash storage. Is anybody else facing similar problems and knows how to fix it?

...fix for this is in the first post.

[pajopasa]

I had the exact same problem. I used Setcpu to lower my settings - haven't had a freeze since...

My device frizes 5 seconds after boot.
Only apears in the tv saying SMART TV and then frizes
I thinks that my problem is the ram at 600
If i put the stock kernel, it boots fine.
Help me Shomari

[fireplayer]

oh and for those of us wanting VPU...

I still have found no working tun.ko - so hotspot shield and openvpn can't do their job....until someone has a working one - I have found a superb and free program that actually somehow allows tunneling without messing w proxies - it's called Hola Better Internet! It's on the play store. And I'm watching Doctor Who on BBC iPlayer right now :-)

Just a tip. I have no connections to the app or its makers personally...

[fireplayer]

I had the exact same problem. I used Setcpu to lower my settings - haven't had a freeze since...

Ok Shomari.
In the first place i install this one

Overclocked Kernel - 1080p (try at your own risk - CPU 1608/GPU 400/DDR 600):https://mega.co.nz/#!6N5RVIBD!48i4hG...g85DAQ7LYSUahE

and what you are saying is that i install this one to try

OC Kernel - CWM flashable:http://ge.tt/8IXOyRn1/v/0?c

Correct?

Well, after this i did what you said i install the kernel by CWM.
The device boot but a few seconds in the android luncher it frezes.
I think my device can´t handle the CPU 1608/GPU 400/DDR 600
The most i think it can handle is CPU 1500/ GPU 400/ DDR 533
Can you help me doing a KERNEL with this CPU 1500/ GPU 400/ DDR 533 ????
Thanks for it.

[mowgli80]

UG007 semi success

Was able to flash the rom on to my UG007. Everything including OC kernel works fine except one thing. The rom is not saving some of my settings. I have a 1080p screen. I disabled overlay and set lcd density to 240. However the display is always scaled down after booting and I need to scale it up in settings->display. Same problem when I changed runtime to ART. Everytime I start the TV stick, it will spend a lot of time optimising installed apps for ART. I had to change the runtime back to dalvik as I was afraid all that optimising might kill the flash storage. Is anybody else facing similar problems and knows how to fix it?

[ikerg]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

I am pretty new to the Android world but I would like to upgrade my 808 to kitkat. Which files do you recommend from the first posting? I need a little hand holding

Just the ROM (the link from mega ....which states "faster")
You will need the rom flasher (v2.1) and the windows drivers.



Enviado desde mi GT-I9300 mediante Tapatalk

[rbptrsn]

I am pretty new to the Android world but I would like to upgrade my 808 to kitkat. Which files do you recommend from the first posting? I need a little hand holding

[pajopasa]

Ok Shomari.
In the first place i install this one

Overclocked Kernel - 1080p (try at your own risk - CPU 1608/GPU 400/DDR 600):https://mega.co.nz/#!6N5RVIBD!48i4hG...g85DAQ7LYSUahE

and what you are saying is that i install this one to try

OC Kernel - CWM flashable:http://ge.tt/8IXOyRn1/v/0?c

Correct?

Well, after this i did what you said i install the kernel by CWM.
The device boot but a few seconds in the android luncher it frezes.
I think my device can´t handle the CPU 1608/GPU 400/DDR 600
The most i think it can handle is CPU 1500/ GPU 400/ DDR 533
Can you help me doing a KERNEL with this CPU 1500/ GPU 400/ DDR 533 ????
Thanks for it.

[Shomari]

I think my device don't like the 600 ddr speed
Shomari can you please try to make a kernel with 533 ddr ?
I will test it for if you like.
I ask you something also, do you think that make the GPU at 466 will make any difference???
Something like this CPU 1608/GPU 466/DDR 533
Thanks for the great rom.

...haha I think the one you flashed is 650mhz. 600 runs fine; use the CWM flashable one in the first post.

I don't know of anyone that has overclocked the GPU above 400mhz and run the RK3066 stable in a tv stick at 1608 & DDR above 300. The kernel in the first post has the GPU at 400 and DDR at 600 - those are the highest stable clock speeds for RK3066 in our devices.

400mhz is the highest you can expect a stable ROM, and trust me - I've had them run up to 650mhz GPU but eventually the ROM goes haywire.

If not we can try a 533 or 548 DDR speed for yours.

[pajopasa]

I flashed my device with the Overclocked Kernel - 1080p (try at your own risk - CPU 1608/GPU 400/DDR 600) but sadly it does boot but freezes in the first picture saying SMART TV
I think my device don't like the 600 ddr speed
Shomari can you please try to make a kernel with 533 ddr ?
I will test it for if you like.
I ask you something also, do you think that make the GPU at 466 will make any difference???
Something like this CPU 1608/GPU 466/DDR 533
Thanks for the great rom.

[ikerg]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

I think you're the second one in the last few days to rip your antenna off. On my iMito MX1 I seriously have no clue how the reset button has survived literally hundreds of flashes.

Could you try to pair your imito mx1with your mobile by BT?

Enviado desde mi GT-I9300 mediante Tapatalk

[Wingchundub]

DONE IT.
Gave up on doing drivers and found an easier way of doing it to save the hassle.
Simply downloaded MOBOROBO, installed it, connected imito to pc, Moborobo then installed drivers.
Then i uninstalled moborobo as no other use for it.
Started KINGOROOT and it had no issues.
Unroot first then clicked root and all good, Now rooted.
CWM installed now with arctools.
Thank you for your guidance, much apprecaited.

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Thanks a milliom, my iMito MX1 is running super smooth, jellybean wasnt doing it. Sadly I ripped off my wifi antenna and I also damaged my reset button.

I think you're the second one in the last few days to rip your antenna off. On my iMito MX1 I seriously have no clue how the reset button has survived literally hundreds of flashes.

[droid4lif3]

Thanks a milliom, my iMito MX1 is running super smooth, jellybean wasnt doing it. Sadly I ripped off my wifi antenna and I also damaged my reset button.

[Wingchundub]

Now after connecting correctly, i geet new device found i.e RK3066 with yellow icon.
Then i go to update drivers which came with rockchip batchtool, but it fails to find them thou i am pointing to correct win7 x86 folder?