Kit Kat 4.4.2 RK3066 (Fully Working)

[gatorojo]

I did not repack mine. I used Finless flash tool that loads each file individually. I only use the RKtool to "switch" it into download when it did boot or the hard reset when I couldn't get it to boot.

Did you use the 4 or 6bg par file? I never tried the 4Gb but my calculations look correct, but I'll go through them again to to be sure.

Oh and with Finless's tool remember to use the boot file from the extracted 4.4.2 as the one from any other version will not work. needs to be v2.12

I see i'll try to do the same with the unpacked files. Thanks!

[reddragon72]

I've unpacked the image using the tool.. changed the parameter file... repack...

Load the firmware... it does everything but wont boot up...

I've tried the original kk rom and works again...

not a clue, maybe different device...

I did not repack mine. I used Finless flash tool that loads each file individually. I only use the RKtool to "switch" it into download when it did boot or the hard reset when I couldn't get it to boot.

Did you use the 4 or 6bg par file? I never tried the 4Gb but my calculations look correct, but I'll go through them again to to be sure.

Oh and with Finless's tool remember to use the boot file from the extracted 4.4.2 as the one from any other version will not work. needs to be v2.12

[gatorojo]

I've unpacked the image using the tool.. changed the parameter file... repack...

Load the firmware... it does everything but wont boot up...

I've tried the original kk rom and works again...

not a clue, maybe different device...

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Tool for edit param file:
Name software - RK ParamEd
OS -Windows
GUI Language - Eng and Rus
Link http://4pda.ru/forum/dl/post/3899187...ramEd_1.01.rar

Thanks! This can help a lot of users. I see it's an updated version, too.

[reddragon72]

Yes please and can you advise what tool you used

See my post 212 the link is in there.

[KVlady]

Tool for edit param file

Tool for edit param file:
Name software - RK ParamEd
OS -Windows
GUI Language - Eng and Rus
Link http://4pda.ru/forum/dl/post/3899187...ramEd_1.01.rar

[enviro8]

Yes Please

W
UPDATE: I found a tool that extracted the img. working on it to see if I can figure out the parameter file. comparing looks crazy but I think I can figure it out.... maybe Bob can stop by and give me a few pointers....

UPDATE!!!!!!! I figured it out and now have 5.91G of internal app storage! YES!!!!!! now I am going to get my 720 gig USB harddrive setup as the SDCARD and be all set!!!

If anyone wants I can setup the files and upload for 4 and 6 gigs.

Yes please and can you advise what tool you used

[reddragon72]

The instructions are here, from Bob some time ago. http://www.freaktab.com/showthread.p...ull=1#post4054

If reddragon72 shares his parameter edits I can link it in the first post for others to benefit. I know a few users have asked to mod the partitions.

Here is the stock parameter file for the ROM: http://ge.tt/5OeiV9o1/v/0?c

Use the instructions to size partitions to your need.

6GB setup. It only leaves 300mb for the NAND(SDCARD)

FIRMWARE_VER:4.4.2
MACHINE_MODEL:rk31_8089
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x 00008000@0x00004000(kernel),0x00008000@0x0000C000( boot),0x000C000@0x00014000(recovery),0x00100000@0x 00020000(backup),0x00040000@0x00120000(cache),0x00 C00000@0x00160000(userdata),0x00002000@0x00D60000( metadata),0x00002000@0x00D62000(kpanic),0x00100000 @0x00D64000(system),-@0x00E64000(user)

4Gb - but I never loaded this just calculated it so no idea what is left over for NAND

FIRMWARE_VER:4.4.2
MACHINE_MODEL:rk31_8089
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x 00008000@0x00004000(kernel),0x00008000@0x0000C000( boot),0x000C000@0x00014000(recovery),0x00100000@0x 00020000(backup),0x00040000@0x00120000(cache),0x00 800000@0x00160000(userdata),0x00002000@0x00960000( metadata),0x00002000@0x00962000(kpanic),0x00100000 @0x00964000(system),-@0x00A64000(user)


the program to open up the main IMG file was http://www.rockchipfirmware.com/site...G_Mod_Tool.zip

Still working on killing off that 300mb NAND so I can get that 750Gb USB drive in place of it. I am wondering if just adding an actual SDCARD will work. I don't have an extra laying around at the moment so I cannot try it out to see if apps with "extra" downloads can be put on that.

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Thanks reddragon72. Please share the files and instructions if possible

The instructions are here, from Bob some time ago. http://www.freaktab.com/showthread.p...ull=1#post4054

If reddragon72 shares his parameter edits I can link it in the first post for others to benefit. I know a few users have asked to mod the partitions.

Here is the stock parameter file for the ROM: http://ge.tt/5OeiV9o1/v/0?c

Use the instructions to size partitions to your need.

[gopichandpai]

Thanks reddragon72. Please share the files and instructions if possible

[gatorojo]

Well progress has been made. Into a brick wall kinda but made.

UPDATE: I found a tool that extracted the img. working on it to see if I can figure out the parameter file. comparing looks crazy but I think I can figure it out.... maybe Bob can stop by and give me a few pointers....

UPDATE!!!!!!! I figured it out and now have 5.91G of internal app storage! YES!!!!!! now I am going to get my 720 gig USB harddrive setup as the SDCARD and be all set!!!

If anyone wants I can setup the files and upload for 4 and 6 gigs.

Great job Reddragon72! what tool have you used to extract? Maybe you can share those parameters files!

Thanks

[reddragon72]

Well progress has been made. Into a brick wall kinda but made.

Finless 1.35 rom app is up and running. I had to set the supportusb11 to 1 but it now sees the device and flashes it successfully.

Ok so I ran the unit with the 6gig par file and the 4.4.2 "broken out" img files and it took it. But it was stuck on the smart TV logo.

So I tried the reset button on my metal case MX1. Uhm... why does the paperclip seem to be scrapping across components.... one screw and one fingernail later and I had the case open. Inside I found no "button" anywhere.... hmmm red board... hmmmmmmmm UG??? yep! I have the UG board and needed to short the two pins. CRAP!!! oh well moving on.

So after I got it into download mode I ran the RKbatch tool and flashed the 4.4.2 and all was good.

Now back to this par file. So this time I unchecked all but the par file and the 4 IMG files that are accosiated with the 4.4.2 and flashed. SUCCESS!!! wait... nope... I get past the splash and into the rotating circles and that never goes anywhere.

So it seem that this new rom is not playing nice with the par files. Either that or the bootloader needs to be extracted... I simply cannot open the larg 4.4.2 IMG file. All the tools that are supposed to open it up fail. I have the individual img files from someone on here in page 3 or 4 or 5, don't remember, So can anyone extract the whole thing and uploaded it for me?

I am really curious and want to keep trying. I'll be working on my barn today but as I take breaks I'll look for posts.

Thanks

UPDATE: I found a tool that extracted the img. working on it to see if I can figure out the parameter file. comparing looks crazy but I think I can figure it out.... maybe Bob can stop by and give me a few pointers....

UPDATE!!!!!!! I figured it out and now have 5.91G of internal app storage! YES!!!!!! now I am going to get my 720 gig USB harddrive setup as the SDCARD and be all set!!!

If anyone wants I can setup the files and upload for 4 and 6 gigs.

[Shomari]

The parameter file would be the best route for whatever partition changes you're going to make if stability is a factor. You won't get any 'suprises' down the line so make sure you fully understand what you're doing if you choose another route.

I recommend Link2SD not apps2sd and use the following guide for best results

http://forum.xda-developers.com/showthread.php?t=1432459

[reddragon72]

Still no go with Finless flash tool so no parameter file yet.

I did learn the RKbatch tool needs a setting in the ini file for lowlevelusb=true as soon as I did that it connected.

Same for Netflix, no HD just 480.

AS for the rom it seems stable and decent.

Gonna try Apps2SD next but I don't like that app much as it is finicky.

[gatorojo]

Internal memory Size

Hey, still working flawless at my device. What i would like to know if there is any possibility to increase system space from default 2gb to 4gb as in the finless rom?