Kit Kat 4.4.2 RK3066 (Fully Working)

[Shomari]

Hi Shomari,
I'm curious in how could you get such a high AnTuTu scores ~15000 for RK3066 based device?
My UG007 1st.(with MTK wifi/BT)is flashed with kernel from your post#159 now and shows me the same score like stock kernel with Overlay dissabled.
All tweaks mentioned by you have been implemented too.

How are you so sure your configuration is a 1:1 match with mine? I can assure you, it's not.

But I couldn't reach higher than ~12500.
What is your AnTuTu version?

The latest, and I just ran a test for kicks and it came back 14935. I can go much higher, this is just what's proven to be stable.

And why in your screenshots GPU descriptions were shown as Mali-T604 or PowerVR SGX 544MP?

Because I utilize GLTools graphics optimizer to boost graphics performance in my tv sticks. I've covered this and how in many threads, even the one's where I'm accused of doctoring screenshots. (kind of like now)

Were these images from you smartphone/tablet(with Amlogic/Samsung chip) and you just wrongly posted them here?

No.

These pictures definitely don't refer to RK3066 w/MTK chipset.
Expain me please, because I have newer seen such a miracle before and it makes me crazy
I use AnTuTu V4.5.1 and my real score is here
[ATTACH=CONFIG]7168[/ATTACH]
Kind regards

You can't pose a question around a definitive statement. It's either you want an answer, or you're providing the answer(s) for me - which you are.

I use GLTools to emulate features and that requires spoofing of the internal GPU to achieve desired results.

I make several modifications to the ramdisk in boot.img and system.img; along with some performance boosting live configurations as well.

I faced similar questions (though much worse) when I used to post in the MK devices section regarding my MK808B tweaks. A fiasco erupted and I was accused of all sorts of villainy for overclocking my MK808B 4.2.2 when most users insisted this was an impossible feat.

Users whom I've helped privately have been able to get similar scores and sometimes higher. It takes patience and persistence not anything magical or fantastic. I hope this clears this up and I don't end up with another mess of interactions like I did in the MK section.

[digger]

Wierd performance

Hi Shomari,
I'm curious in how could you get such a high AnTuTu scores ~15000 for RK3066 based device?
My UG007 1st.(with MTK wifi/BT)is flashed with kernel from your post#159 now and shows me the same score like stock kernel with Overlay dissabled.
All tweaks mentioned by you have been implemented too.
But I couldn't reach higher than ~12500.
What is your AnTuTu version?
And why in your screenshots GPU descriptions were shown as Mali-T604 or PowerVR SGX 544MP?
Were these images from you smartphone/tablet(with Amlogic/Samsung chip) and you just wrongly posted them here?
These pictures definitely don't refer to RK3066 w/MTK chipset.
Expain me please, because I have newer seen such a miracle before and it makes me crazy
I use AnTuTu V4.5.1 and my real score is here

Kind regards

[reddragon72]

[QUOTE=enviro8;204322]

I tried his tool.... then I searched again. Found the same package with 8 version in it. Then I searched deeper in the rabbit hole and BOOM! I found a new version 4.2.80.00 and low and behold it works!!/QUOTE]

I have tried the Tools V4.2.80.00 but whatever I do I get the following error when I try to open any .img such as system.img or boot.img "Uncorrect name or system patch, space character was found!"

What am I doing wrong?

I am using a MX! with RK3066 updated to KitKat and have extracted the .img files (boot, system, kpanic, user, etc) as per the Finless procedure.

The tool is designed for the main IMG file not the individual broken out files boot,system, etc.

Load up the main img that contains the whole image(which is linked on the first page) then load that at the top. Once you unpack that you can then unpack and edit the remaining and then repack everything.

The extracted boot.img can be found in the temp/boot/boot.img.unkrnl.dump directory.
Once you have edited what you wanted then go back into the firmware tools app and hit build. Your newly built boot.img file can now be found in temp/android/image

One thing to note don't close the firmware tool app. you can always reopen the app and reopen the project but I find it easier just to leave it open.

have fun!!!

[enviro8]

[QUOTE=reddragon72;204308]I tried his tool.... then I searched again. Found the same package with 8 version in it. Then I searched deeper in the rabbit hole and BOOM! I found a new version 4.2.80.00 and low and behold it works!!/QUOTE]

I have tried the Tools V4.2.80.00 but whatever I do I get the following error when I try to open any .img such as system.img or boot.img "Uncorrect name or system patch, space character was found!"

What am I doing wrong?

I am using a MX! with RK3066 updated to KitKat and have extracted the .img files (boot, system, kpanic, user, etc) as per the Finless procedure.

[reddragon72]

On windows use SergioPoverony's tool to unpack.

I tried his tool.... then I searched again. Found the same package with 8 version in it. Then I searched deeper in the rabbit hole and BOOM! I found a new version 4.2.80.00 and low and behold it works!!

Thanks for making me look againx2

So I did a quick test and the fstab.rk....unkown file can be made to kill off the internal link!!

Now I just have to figure out the string to get the usb HD to come up as the NAND. I did it once and I'll do it again.

Once I get the string I'll also figure out the external_sd in case anyone wants to use a microSD as the NAND.

Check back tomorrow as tonight I have chores to do with my horses so I wont start this trek till 9AM central US.

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Well another brick wall has been hit.

I simply cannot find a single tool to extract boot.img that works.

So to make the adjustments to ini files you must unpack the boot.img and then the ramdisk. Only issue is I have found not one app in Windows that works.

trying to get Ubuntu setup now or even a tutorial for Android.

On windows use SergioPoverony's tool to unpack.

[reddragon72]

Well another brick wall has been hit.

I simply cannot find a single tool to extract boot.img that works.

So to make the adjustments to ini files you must unpack the boot.img and then the ramdisk. Only issue is I have found not one app in Windows that works.

trying to get Ubuntu setup now or even a tutorial for Android.

[Shomari]

Wifi drivers are proprietary and built into the rockchip kernel. So, no dice..

[reddragon72]

what about those with Realtek RTL8188CUS wifi chipsets ? (RTL8192CU uses the same driver too)
any way to make wifi work?

For drivers I beleive you must inject them into the system.img file and then they will be available but they may not be picked up by the kernel so something else need to be done to the ini file.

You will have to wait for someone with more knowledge than me on this one.

[mite_jan]

what about those with Realtek RTL8188CUS wifi chipsets ? (RTL8192CU uses the same driver too)
any way to make wifi work?

[reddragon72]

That didn't worked out either Shomari, so what i've tried was change the original file with dragon's digits and that finally works!

I've tested both 4 and 6 gb files

You can download them from here: Parameters

I hope those can help

Already rooted again and upload FusedLocation.apk to my device

Thanks again guys for yout help!

Glad they got that straight for you. Yea you have to copy and paste into the current file. Creating a new one in Windows wont work.

I am still working on the swap over from the internal NAND to the USB drive. No luck as it seems they no longer use the vold.fstab files.... I am digging deeper into the system files and still nothing. All the ini files are useless so I am stumped but not out.

Once I find out how to swap the USB into the NAND slot I'll post up. A USB 2.0 harddrive is faster that an SDCard and every bit as fast as the internal RAM. My 4.1.1 setup was awesome with the 6Gb app storage and the USB harddrive.

[Pampam]

Do dis also works on the minix x5

[gatorojo]

4gb and 6gb parameters files

That didn't worked out either Shomari, so what i've tried was change the original file with dragon's digits and that finally works!

I've tested both 4 and 6 gb files

You can download them from here: Parameters

I hope those can help

Already rooted again and upload FusedLocation.apk to my device

Thanks again guys for yout help!

[Shomari]

Still no luck, can you please paste the parameters inside a code tag, i think on the copy from forum post its the problem.

Thanks again!

Use this file, it uses the changes from above http://ge.tt/9fbStJo1/v/1?c

[gatorojo]

Still no luck, can you please paste the parameters inside a code tag, i think on the copy from forum post its the problem.

Thanks again!