Kit Kat 4.4.2 RK3066 (Fully Working)

[uniextra]

well shortcuting pins 8 and 9 on nand i get the stick recognized by android pc

i try to upgrade but gets to "waiting for loader start" and then fails... tested and the same hapes on rockchip and androidtool

"Download boot start... Download boot success"
"Wait for MaskROM... MaskROM success"
"Test device start.... Test device success"
"Check Chip start... Check chip success"
"Get flashinfo start... Get flashinfo success"
"Prepare IDB start... IDB start success"
"Download IDB start... Download IDB success"
"Reset device start.... Reset device success"
"Wait for loader start... Wait for loader FAIL"


SOLVED: W8 driver reinstalled and anllow unsigned drivers

grate ROM woring on MK802IIIS

[uniextra]

dead

Hi all, im a fool, as there was no a step by step guide in any of the 16 pages i did as it was a mobile

with original JB i downloaded and installed CWM and rebooted, now stick does not boot and i cant get it recognize on windows aswell-

any help plese to revive the thing?

thanks!!

[reddragon72]

Is anyone else having issues with ADB on this ROM?

When I connect to my computer, it doesn't do anything... It doesn't show in Device Manager (Windows 7 x64) and it doesn't try to install drivers. Nothing happens.

I've tried deleting all Android/ADB related drivers from my computer using USBDeview. But still nothing.

try installing pdanet and see if that helps. their drivers usually fix everything... usually.

[fritz122]

is this build rootet ?

[RatTub]

Is anyone else having issues with ADB on this ROM?

When I connect to my computer, it doesn't do anything... It doesn't show in Device Manager (Windows 7 x64) and it doesn't try to install drivers. Nothing happens.

I've tried deleting all Android/ADB related drivers from my computer using USBDeview. But still nothing.

[reddragon72]

At all, thank you Mr. reddragon72 !
But I am really read all your posts before I wrote my request and were valuable for me!
But because I feel that you giving up from trying and because I read a solved such a problem in an other thread ( http://www.freaktab.com/showthread.p...mp-External-SD )
So, I "decid" to asked such a question!
Now, surly, and unfortunately, I will switch back to the finless 1.7a because my usage for the stick is mainly for gaming and I am really want a huge size of memory space for that and I tried folder mount application for moving data to my hard desk but it didn't work!

Thank you for this nice ROM
( Just a note: in this kit Kat ROM when I wake up the device from a sleep, there is no sound at all! I have to reboot to make sound come back again)

I never gave up per say just don't have a lot of need for the device anymore and was kinda bored so I took on the task.

As for the vold.. well... I tired messing with it and no go. It seems the rom is a bit more locked down in other areas. If I have time I may try it again with info from the other thread. Remember not all the roms are the same across all the chips and various vendors. What works there doesn't mean it will work here.

[mertonv]

bluetooth audio support

Any way to add HSP/hfp profiles for Bluetooth audio?
So we can use it for phonecalls on hangouts and "OK google"

Also; anyone tried the team viewer quicksupport app? The remote desktop part?
Why it fails?
I'm already rooted yet it doesn't work

Thanks!

[tfpereira]

Shomari, could you share the source code of the kernel you used with this rom? I needed to add custom support to a touchscreen device, which I can't do without editing the kernel.

Thanks!

[virtualpurple]

I'm not sure which ports are USB2 an which are USB3 to be honest. However, if that were the case, wouldn't the computer fail to recognize the device at all?

[mystguy]

just make sure that u r using usb 2.0 port on your computer... usb 3.0 is not recognized

[virtualpurple]

So strange, I've tried everything I could think of to try and get the imito mx2 into flash mode. I have attempted using Bob's Finless tool for flashing, as well as both the rockchip 1.7 and 2.1. Whenever I try and switch mode to get into flash mode I lose my device entirely, and it isn't recognized again unless I unplug power and then plug back in.

I also constantly get the message "match device type failed! Stop running!" constantly, although rockchip 2.1 says "found one MSC Device".

I have also tried to manually set the Mx2 into flash mode by holding the reset button with a paperclip while plugging the device in. Whenever that happens I get the same result as switching modes. Device is no longer recognized (with 2 different computers) and it will not get recognized again until I cut off and resupply power.

Has anyone got suggestions? It seems I have made far and away the least amount of progress.

Also it appears my device is being mistaken for a samsung galaxy s2 in kingo root...odd.

Thanks,

VP

[virtualpurple]

I've been a little out of the game since flashing one of bob's mods last year sometime.

I am using a Imito Mx2, and for the life of me I cannot figure out how to flash this stuff. I have downloaded kitkat from the first post on the forum, I also have rockchip 1.7 and 2.1

However, from here I keep running into dead ends. Can anyone link me to the flashing method for the mx2?

[acer09]

Sorry let me be more specific I am flashing this kernel Overclocked Kernel - 1080p (try at your own risk - CPU 1608/GPU 400/DDR 600):https://mega.co.nz/#!6N5RVIBD!48i4hG...g85DAQ7LYSUahE and it is doing nothing although it is flashing properly every time with cwm and pc flash tool. Thanks.

Hi,

can I have a link that works?

thanks

[chsmith1976]

CWM: Download Arctools https://mega.co.nz/#!zNpiSTZB!DIy4BR...aHVlfLfglAWA8I and select (OMA / CrewRKTablets) CWM Recovery 6.0.3.1 for Android 4.4.2 KitKat on RK tablets (loader Gen2) in packages. Download and install, reboot. You must select the Oma package for full CWM compatibility.

Flashed the OMA CWM on my MK809II, but now I'm stuck in a bootloop into recovery, can't get back to Android, can't backup my current ROM, device not detected in Finless Bob's flash tool, adb inaccessible - total disaster. Any help would be greatly appreciated.

BTW, CWM can't mount anything, hence my apparent lack of options.

[jockyw2001]

Try to read here
http://www.freaktab.com/showthread.p...l=1#post199394

Gotcha, thanks!

Btw, installed the rom on my MK802IIIS and get a 17283 score in Antutu !