Zoomtak T8 and M8 official firmwares

[LawlessPPC]

just found invented an unbrick method for the M8 http://freaktab.com/forum/tv-player-...unbrick-method

[LawlessPPC]

V3.4.1 firmware Antutu score 31604

[stane1983]

First post updated with 3.4.2 firmware for T8v2 and M8. T8v1 firmware I don't have, will upload when I get it.

Stane1983

[stane1983]

First post updated with 3.4.0 firmware for T8v1 devices.

[jellywobbles]

First post updated with 3.4.2 firmware for T8v2 and M8. T8v1 firmware I don't have, will upload when I get it.

Stane1983

Thanks Stane - much appreciated

[kgm316]

Hi guys what is the best way to root the T8 i have tried a few diffferent firmwares but using zoomtak now

[londonshore]

new t8 plus is out going to get me one

[jellywobbles]

Has anyone removed the motherboard on a Zoomtak M8 (black metal box model)? Looks like the only entry point is via 4 small screws in the plastic back panel that holds all of the connectors?

Got one here that has been damaged in transit - something rattling around inside

[deke417]

Has anyone removed the motherboard on a Zoomtak M8 (black metal box model)? Looks like the only entry point is via 4 small screws in the plastic back panel that holds all of the connectors?

Got one here that has been damaged in transit - something rattling around inside

There are 5 screws on plastic back panel, one is hidden under a little round sticker (QCpass) which is close to the middle. Hope this helps

[jellywobbles]

Thanks very much for your reply

Sent from my Galaxy Note 3 using Tapatalk 2.

[Brad808]

I have T8 latest firmware w/ kodi wizard but its on an SD card. PM me if you have an idea on how to get it to you.

[Brad808]

Hi,

I talked to Zoomtak SW engineer about doubts which device is which.

Here are list of Zoomtak S802 devices:

• T8 (single band wifi - 8188eu, without bluetooth)
• T8 V2 (dual band wifi with bluetooth)
• M8 (dual band wifi with bluetooth)

T8 V2 and M8 devices uses same firmware (as it's same hardware in different packaging).

There are two ways of identifying T8 device. 1st, if you don't have Bluetooth settings in Settings app, you have T8 (first version), otherwise T8 V2. 2nd, on bottom of box should be written on sticker V2 which stands for T8 V2 version.

Install instructions:
Download all files, put them to root of sdcard and power device on with recovery button pressed or select .zip file from Upgrade app inside Android.

These are not mine firmwares so I don't accept feature requests lol, but you can write some feedback here, maybe Zoomtak staff will read this thread

Zoomtak firmware 3.4.2:

• T8 V2 & M8 - stane1983.com

Zoomtak firmware 3.4.0:

• T8 V2 & M8 - stane1983.com
• T8 V1 - stane1983.com

Hi thought I should state for the record that I have a T8 that has no V2 on the bottom but does have dual wifi and bluetooth. Its a used unit from Amazon so I dont know if its been upgraded or what. Im a newb buy I dont think firmware alone will enable 5.8ghz wifi.

[smidy]

I have aT8 that seems to be different. I assume a V1 as single band wifi but it has bluetooth? . I have flashed new V2 firmware and now have no wifi only lan (it appears but will not switch on)

Any ideas anyone?

[JustMe]

reflash it v2 then, did you have bluetooth prior flashing?

• T8 (single band wifi - 8188eu, without bluetooth)
• T8 V2 (dual band wifi with bluetooth)
• M8 (dual band wifi with bluetooth)

[smidy]

Yes I had only single band wifi and bluetooth prior to flash. So only 2,4 ghz wifi and no 5ghz. S thats whats confusing as does not say T8 V2 on base.