vigica c70 dvb s2

[iam]

Hi, for now all is ok, no porblem with openelec, if i want to run android the first boot open automatically recovery and i have to select reboot now and start in original android system, i get connect and tune channels from tvheadend and now i am trying to run oscam, i having problem to connmect with tvheadend

regards

What problems? i have c60s but i do not have sat, i just have the box for resale. But i successfully installed TvHeadEnd, i connected to web interface...
i had problems.... i was getting message that client can not connect to backend, and i was not able to connect to webinterface. But i installed those 3 links i gave you, and after reboot it started to work

to use emulator you also have to enable something in TvHeadEnd..forgot how it called.
Anyways i give you link (russian website)

http://hdbox.ws/amlogic-mx/71-nastroyka-tvheadend-versii-39xxx-dlya-vs-ip015-na-baze-openelec-421.html

you can see it, maybe will help. It's pretty old but i think nothing changed

EDIT: UPS wrong link. Use this one: http://hdbox.ws/amlogic-mx/80-nastro...prosmotra.html

[manu-de]

What problems? i have c60s but i do not have sat, i just have the box for resale. But i successfully installed TvHeadEnd, i connected to web interface...
i had problems.... i was getting message that client can not connect to backend, and i was not able to connect to webinterface. But i installed those 3 links i gave you, and after reboot it started to work

to use emulator you also have to enable something in TvHeadEnd..forgot how it called.
Anyways i give you link (russian website)

http://hdbox.ws/amlogic-mx/71-nastroyka-tvheadend-versii-39xxx-dlya-vs-ip015-na-baze-openelec-421.html

you can see it, maybe will help. It's pretty old but i think nothing changed

EDIT: UPS wrong link. Use this one: http://hdbox.ws/amlogic-mx/80-nastro...prosmotra.html

My problem is that tvheadend not connect with oscam, I enabled it in tvheadend web gui , i am in vitmod 1.2, i will try with 1.5.......

[iam]

My problem is that tvheadend not connect with oscam, I enabled it in tvheadend web gui , i am in vitmod 1.2, i will try with 1.5.......

I recommend using 1.4. I think most stable. 1.5 still alpha.

[manu-de]

I recommend using 1.4. I think most stable. 1.5 still alpha.

bad news friend, i get all working perfect but now openelec dont run, like you..

[iam]

bad news friend, i get all working perfect but now openelec dont run, like you..

sad.. i was thinking maybe my sd card was bad, but looks like this is not the case.
Boot it looks like it just cant boot anymore... previously (if i not msistaken by other OpenElec image which runs from NAND) i was getting some linux error of "Can't Access TTY: Job Control Turned Off" or something like it.

[manu-de]

Yes, I make another sd and bool again but... how many days? ??? Do you try to install permanently in nand?

[iam]

Yes, I make another sd and bool again but... how many days? ??? Do you try to install permanently in nand?

Ye si tried CodeSnake's OpenELEC image, it writes to nand. BUT BE CAREFUL! Once you write it - you can not longer use recovery, so if you write firmware to sd - it wont update. And 90% of times CodeSnake's image just hangs for me and doesnt boot. so need to go back to android, and there were no HOW.

As always -russian websites helped.. found that i have to short 2 specific pins in one chip on board while powering on, so it will SD boot, not from NAND. so you ave to make bootable SD card, write firmware as always and it will flash nand to ANDROID again.

VITMOD for me always was better. CodeSnake's image boots once and thats it. For others it works good. for me -no.

Here the image: http://www.freaktab.com/showthread.p...TV110-MX2-G18)

you need the G18 one.

[Bogart7777]

I bricked my v60 using code snakes

Ye si tried CodeSnake's OpenELEC image, it writes to nand. BUT BE CAREFUL! Once you write it - you can not longer use recovery, so if you write firmware to sd - it wont update. And 90% of times CodeSnake's image just hangs for me and doesnt boot. so need to go back to android, and there were no HOW.

As always -russian websites helped.. found that i have to short 2 specific pins in one chip on board while powering on, so it will SD boot, not from NAND. so you ave to make bootable SD card, write firmware as always and it will flash nand to ANDROID again.

VITMOD for me always was better. CodeSnake's image boots once and thats it. For others it works good. for me -no.

Here the image: http://www.freaktab.com/showthread.p...TV110-MX2-G18)

you need the G18 one.

Hi I bricked my vigica c60 using codesnakes openelec. Can you send me a link to the russian site that show me how to unbrick it. As well did you find a openelec file to run on this box if so can you provide the link. Thanks in advance.

[iam]

Hi I bricked my vigica c60 using codesnakes openelec. Can you send me a link to the russian site that show me how to unbrick it. As well did you find a openelec file to run on this box if so can you provide the link. Thanks in advance.

Hi bogart. now im at work and image is in home's pc. In few hours i will be there and add it here, what pins to short.

----- RECOVERING:

Create bootable microSd card:
Download SDmaker: https://mega.co.nz/#!ABUhhYxY!LlYsUm...HuJak628HjIOKg

download u-boot.bin : https://mega.co.nz/#!AJEgmZIL!BgYPay...uj0I13p9ZsmCvU (put it in the same folder as SDmaker)

run sdmaker, check box to format card, select u-boot.bin file and proceed with sd maker.

After finished download firmware from this link https://mega.co.nz/#!BJ5FERxZ!EZyWtH...4GofPtRmFyBwJ4
extract content to sd card.



----- Booting from sd

Put created sd card into the box.You have to short those 2 pins on chip while powering on box, for 4 secs. you may use small screwdrive or knife:


Box in photo is not Vigica c60S but they are similar at this point, all parts the same.

This will install vigica firmware to your box and you will again have working box.

----- OpenElec from MicroSD:

The image who runs from MicroSD is called VITMOD (by man name Vitaly, he makes many images for many devices).

Here is whole tutorial how to install VITMOD (of coourse use google translate):

http://hdbox.ws/amlogic-mx/69-openelec-s-xbmc-i-tvheadend-dlya-dvb-s2-resivera-g18ref-c-avl6211.html

Here is newer version of VitMoD 1.4 https://yadi.sk/d/RUPp_v80essdh

[buyadegara]

thanks for info

[freddy_krueger]

Hi bogart. now im at work and image is in home's pc. In few hours i will be there and add it here, what pins to short.

----- RECOVERING:

Create bootable microSd card:
Download SDmaker: https://mega.co.nz/#!ABUhhYxY!LlYsUm...HuJak628HjIOKg

download u-boot.bin : https://mega.co.nz/#!AJEgmZIL!BgYPay...uj0I13p9ZsmCvU (put it in the same folder as SDmaker)

run sdmaker, check box to format card, select u-boot.bin file and proceed with sd maker.

After finished download firmware from this link https://mega.co.nz/#!BJ5FERxZ!EZyWtH...4GofPtRmFyBwJ4
extract content to sd card.



----- Booting from sd

Put created sd card into the box.You have to short those 2 pins on chip while powering on box, for 4 secs. you may use small screwdrive or knife:


Box in photo is not Vigica c60S but they are similar at this point, all parts the same.

This will install vigica firmware to your box and you will again have working box.

----- OpenElec from MicroSD:

The image who runs from MicroSD is called VITMOD (by man name Vitaly, he makes many images for many devices).

Here is whole tutorial how to install VITMOD (of coourse use google translate):

http://hdbox.ws/amlogic-mx/69-openelec-s-xbmc-i-tvheadend-dlya-dvb-s2-resivera-g18ref-c-avl6211.html

Here is newer version of VitMoD 1.4 https://yadi.sk/d/RUPp_v80essdh

Yeah thanks for all these tips IAM
so now , why buy wetek when vigica can do the same with lower price ?
does this run on c90s too ?

[iam]

Yeah thanks for all these tips IAM
so now , why buy wetek when vigica can do the same with lower price ?
does this run on c90s too ?

Well sedly but it doesn do the same. I never got stable OpenElec on my Vigica C60S. only from SD card..but after day or so it just doesn boot anymore.
I think the best is to use android. android supports XBMC too, so you have almost the same as OpenElec but bit slower booting.
Also stock android [xbmc) is 720p not 1080p. There are images with 1080p android. Also there is another program XBMC clone, which runs at fullHD, forgot the name, but also 4 letters it's a based on XBMC

[Midou]

Hi friends,
Iam thank you for your explanation.
I possess the same Vigica C70s.
Reading your answer, questions come to mind:
- There's there a possibility to install tvheadend directly on the stock system (android and xbmc) without having to OpenELEC to use the receiver as a server for other terminals, tablet ...? Can you please help me install tvheadend directly without the flash OpenELEC ?
- Why not save the files to a USB flash drive instead of sd card that break problem of data corruption?
Thank you for your answers.

[iam]

Hi friends,
Iam thank you for your explanation.
I possess the same Vigica C70s.
Reading your answer, questions come to mind:
- There's there a possibility to install tvheadend directly on the stock system (android and xbmc) without having to OpenELEC to use the receiver as a server for other terminals, tablet ...? Can you please help me install tvheadend directly without the flash OpenELEC ?
- Why not save the files to a USB flash drive instead of sd card that break problem of data corruption?
Thank you for your answers.

Hi because Tvheadend is xbmc plugin i think there is no difference on what os you install it. I dont use it so i cant tell you how exacly do this, i used only once to test my box and i was trying with openelec.

you my try this articlee http://hdbox.ws/amlogic-mx/69-openel...c-avl6211.html and download tvheadend services maybe it all be good for android.

[Midou]

I tested three tvheaded version posted on the link, none of them work with xbmc on android.

I think it is dsigned for OpenELEC only. I dont find a tvheaded for android xbmc in the net !

Need your help please to do this.