[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

[Flashaholic]

I don't know what will help, but what I would do is start fresh. I found a link to the MX firmware from a site, though some mentioned another site that costs money. Here's the free one. https://mega.nz/#!AlVUnDQa!gRBryRmS7...94x1CybBwdpgMI and here's the website. http://chinagadgetsreviews.blogspot....422-stock.html . Drop it on an sd card, following the toothpick method. Do a cache wipe, etc before you get started. Then toothpick again with codesnake's version, or put libre elec on. Good luck!

Thanks for your reply.
However for some reason i cant get my box into recovery mode.
All i get is a blue screen saying no signal.
Any ideas how to solve this?
thanks once again.

[startreksuite]

I don't know what will help, but what I would do is start fresh. I found a link to the MX firmware from a site, though some mentioned another site that costs money. Here's the free one. https://mega.nz/#!AlVUnDQa!gRBryRmS7...94x1CybBwdpgMI and here's the website. http://chinagadgetsreviews.blogspot....422-stock.html . Drop it on an sd card, following the toothpick method. Do a cache wipe, etc before you get started. Then toothpick again with codesnake's version, or put libre elec on. Good luck!

[Flashaholic]

This is the device I'm using by the way. Thanks.

[Flashaholic]

Evening. I updated to Nemises 5weeks ago. All been working fine. But today had to reboot box and now the box is stuck on the Openelec logo with writing at the top left saying......

Can't access tty; job control turned off.

So tried a fresh install of nemesis kodi Jarvis. The box starts to flash, it boots up with Openelec logo. But there is no kodi Jarvis. The screen just goes grey.

So I decided to go back to Codesnake 6.0.3 Insengard. Box flashed straight away. Now I have a problem where the playback is very stuttery and also I can't select resolution 1080. Adjusted hw acceleration etc still no joy. As for selecting 1080 resolution iv never had this problem in the past. .

It would be very appreciated if I could be advised on what to do to solve these issues above.

Or even someone could post a file to revert back to android and start all over again.


Thanks..👍

[startreksuite]

There's a rumor floating around that he is working with the wetek company for their openelec boxes. Otherwise, I don't know.

[mcowher]

Is Codesnake no longer providing upgrades to this device?

I am very happy with the Nemsis upgrade provided, but am just wondering.

[startreksuite]

That's the one. I felt the need to upgrade due to the exodus addon requiring it.

[Flashaholic]

Here is the .tar link that ruppert was asking for

https://mega.nz/#!Aw0ViB6Q!uPVdqz9VSpzyEgFXmY3QjJWK7G-s6HNh42a_YQBNx-Q

Is that kodi Jarvis 16.0?

[Flashaholic]

thank you flashaholic that was very nice of you to post it for me i was looking all over the net for a copy


edit: hi flashaholic I just downloaded the file but I don't think i see a .tar file I think this is the full update am I right I was looking for his .tar file to drop in my update folder I think with this file I will have to do a full toothpick flash am I right about this ??? again thank you for your help

My mistake. Sorry. Hope you get it sorted.

I'm sure that's the update tar file I used.

Go with Startreksuite link. 👍

[startreksuite]

You're welcome!

[ruppert]

Thank you

[startreksuite]

Here is the .tar link that ruppert was asking for

https://mega.nz/#!Aw0ViB6Q!uPVdqz9VSpzyEgFXmY3QjJWK7G-s6HNh42a_YQBNx-Q

[ruppert]

thank you flashaholic that was very nice of you to post it for me i was looking all over the net for a copy


edit: hi flashaholic I just downloaded the file but I don't think i see a .tar file I think this is the full update am I right I was looking for his .tar file to drop in my update folder I think with this file I will have to do a full toothpick flash am I right about this ??? again thank you for your help

[Flashaholic]

Hi nemsis can you please repost the 7.0 tar file link again the link a page back is not working I want to update my codesnake 6.03 copy to your newer version of kodi and I can't find the update tar file anywhere thank you or anyone else on here that can post me a working link

Here is the file.

https://mega.nz/#!Yd5HhSIZ!BPv_AvYiwRMlhk8CcspvWm0XWBeIdjX4JS0dNs6I8Zg

[ruppert]

Hi nemsis can you please repost the 7.0 tar file link again the link a page back is not working I want to update my codesnake 6.03 copy to your newer version of kodi and I can't find the update tar file anywhere thank you or anyone else on here that can post me a working link