HPH RK3288 ROM v1.2 by mo123 (20141117)

[bluesmanuk]

No, I haven't had the time; however, the M8 (tomato) is rooted and these apps work flawlessly.

At least that eliminates one possible reason for it and a pointer to where there is a potential solution.

[Luxilon]

As an additional step, have you tried fully unrooting as well to see what happens then?

No, I haven't had the time; however, the M8 (tomato) is rooted and these apps work flawlessly.

[bluesmanuk]

unfortunately, simply editing the build prop test-keys did NOT fix the XFINITY Go app crash issue. Still getting "3001:: Error account credentials have expired. Please sign out."

As an additional step, have you tried fully unrooting as well to see what happens then?

[Luxilon]

Mo123,

- Fixed problem with certain cable apps not working, yesGO, Comcast & Xfinity, drm satellite cable apps that have issues with DRM

How did you fix this? I have been scratching my head about this issue and cannot figure it out.

Bob

unfortunately, simply editing the build prop test-keys did NOT fix the XFINITY Go app crash issue. Still getting "3001:: Error account credentials have expired. Please sign out."

[mo123]

Just installed this ROM on my R28.

Just finished testing everything and all works very well indeed.

The Eutelsat[/URL] 4k file is the only file that won't play with just mediacodec enabled in SPMC but that was the same before anyway.

All other videos play well.

Great work

Think that video uses webm or vp9 codec, that isn't used by Mediacodec or something.
Most videos are mkv/avc or hevc, so it won't be a big problem.

[mo123]

Mo123,

- Fixed problem with certain cable apps not working, yesGO, Comcast & Xfinity, drm satellite cable apps that have issues with DRM

How did you fix this? I have been scratching my head about this issue and cannot figure it out.

Bob

In the build.prop file, I replaced all the 'test'-keys entries with 'release'-keys
Saw the thread here - http://www.freaktab.com/showthread.p...ighlight=yesGO
Didn't test it myself, since I don't use that apps.

[bluesmanuk]

Just installed this ROM on my R28.

Just finished testing everything and all works very well indeed.

The Eutelsat[/URL] 4k file is the only file that won't play with just mediacodec enabled in SPMC but that was the same before anyway.

All other videos play well.

Great work

[Finless]

Mo123,

- Fixed problem with certain cable apps not working, yesGO, Comcast & Xfinity, drm satellite cable apps that have issues with DRM

How did you fix this? I have been scratching my head about this issue and cannot figure it out.

Bob

[mo123]

I actually use Bob 1.2 generic RK3288 firmware.
Can i use same RK tool flash with Bob 1.2 rom and replace with yours boot.img, ressource.img, kernel.img and just flash?

Thanks mo123 for support.

You can use my ROM and replace the boot.img, resource.img, kernel.img with the ones from Bob's ROM.
Might loose some wifi tweaks from the boot.img, but don't think it's very noticeable.
The system.img has lots of changes, so not 100% it will work correctly with Tronsmart Images, but it should. Try it, if it doesn't work, you can just flash Bob's ROM back again, very easy.

[mo123]

Hi mo123,
Because I have already installed last Friday 24th of Oct. the latest Nagrace firmware for the HPH 4Gb / 32 Gb box and I've spend some time to reinstall and reconfigure all the Apps that I had before and also all the Addons for XBMC and SPMC, from the backups that I did before upgrading again my box (already done it 4 times now), that I was wondering if I can flash your modded ROM that is based on the firmware that I have installed just by flash the images that you have tweaked without the need to start all over again. Is it possible? Which images should I flash only?
Thanks.

You can flash boot.img for the wifi tweaks.
Can flash system.img for the
- remote files
- XBMC video payback fixes
- For the pre-installed apps
I'm not 100% sure, but the apps I mentioned in the OP will then be replaced eg. SPMC
There are addons for SPMC that you can install that make backups of all the Addons installed or manually backup the userdata folder of SPMC and restore it later, need to show hidden files and enable root access in ES File Manager to see files. Your other installed apps should stay the same, but I cannot guarantee it.
It will be best to flash ROM over again, but try to flash the 3 Image files first and see if it works.
The apps that get pre-installed from the system.img is the only thing that might give problems with your setup.
Hope it helps.

[fmoreira66]

Hi mo123,
Because I have already installed last Friday 24th of Oct. the latest Nagrace firmware for the HPH 4Gb / 32 Gb box and I've spend some time to reinstall and reconfigure all the Apps that I had before and also all the Addons for XBMC and SPMC, from the backups that I did before upgrading again my box (already done it 4 times now), that I was wondering if I can flash your modded ROM that is based on the firmware that I have installed just by flash the images that you have tweaked without the need to start all over again. Is it possible? Which images should I flash only?
Thanks.

[roolmapool]

Yes, just split your latest Tronsmart firmware with the flash tool.
Replace my boot.img, resource.img and kernel.img with your split firmware files.
Then use mkUpdate.bat to make a single Image file to flash to your device.
Try to use the latest 100k4 firmware of your device.
I will try to upload boot.img for Tronsmart devices with my tweaks also.

I actually use Bob 1.2 generic RK3288 firmware.
Can i use same RK tool flash with Bob 1.2 rom and replace with yours boot.img, ressource.img, kernel.img and just flash?

Thanks mo123 for support.

[mo123]

Yes, the camera was connected when I posted the logs.
The only other apps that I am able to see this camera working are the followings:

https://play.google.com/store/apps/details?id=infinitegra.trial.usbcamera

https://play.google.com/store/apps/details?id=com.serenegiant.usbwebcamera

Thanks

Have reported your problem, maybe I'll get a response soon.

[niko]

Have you tried other usb web camera apps from the Play Store?
Most probably the camera has to be enabled correctly in the kernel.
Just to make 100% sure, the camera was connected when you posted the logs?
See also here
http://forum.xda-developers.com/show...8#post47946858

Yes, the camera was connected when I posted the logs.
The only other apps that I am able to see this camera working are the followings:

https://play.google.com/store/apps/details?id=infinitegra.trial.usbcamera

https://play.google.com/store/apps/details?id=com.serenegiant.usbwebcamera

Thanks

[mo123]

Thank you for your support
Please find attached the requested information
Regards

Niko

Have you tried other usb web camera apps from the Play Store?
Most probably the camera has to be enabled correctly in the kernel.
Just to make 100% sure, the camera was connected when you posted the logs?
See also here

http://forum.xda-developers.com/showthread.php?p=47946858#post47946858