HPH RK3288 ROM v1.2 by mo123 (20141117)

[Hocine.Merouane]

Mistake

[mo123]

I am so sorry in advance to bother you.
but I really need help. Please, could someone help me?

my UGOOS is 4g/32G with the following firmware:
UT3_rooted_19.09.2014.img from ChinaGadgetsReviews.
This is one file of 450 MB.

So first, is this ROM suitable for the rest of the procedure ?

secondly, how do I use my own Resource.img and Boot.img during the flash of mo123 ROM ?

You can just flash the whole ROM.
Follow the instructions carefully.
If it doesn't work, look at #97. I uploaded the Ugoos boot.img and resource.img.
The HPH and Ugoos use the same hardware and firmware, so it shouldn't be an issue.

http://www.freaktab.com/showthread.php?18706-HPH-RK3288-ROM-v1-2-by-mo123-(20141117)&p=249705&viewfull=1#post249705

If you want to split your firmware
1. Open AndroidTool and go to 3rd tab, 'Advanced Function'
2. Then 'Firmware', Select your update.img file
3. Select 'Unpack' to unpack the firmware.

[mo123]

The SPMC playback is really good, no issues or crashes seeking in videos anymore and better 4K playback.
Remember to also restore Solo Launcher's 2 backups.
Solo Launcher is completely free and some of it's features are only available in paid Nova Launcher.

Can also release an SPMC addons update if interested. PM me the addons you want included, try to limit it to free, non-adware included addons.

Also want to make an app package but can't seem to find a working TWRP/CWM for RK3288 at the moment.

Very important to do a clean wipe, 'lowerformat' and use default parameter file, rk3288-3.10-uboot.parameter to avoid soft-bricking your device.

[Hocine.Merouane]

Also uploaded ROM to Solidfiles, filesize should be 489MB.

No need to substitute anything with files from 1.3.35 ROM, this is based on V1.3.35_141112 stock ROM.
Only use default parameter file - rk3288-3.10-uboot.parameter from v1.2 ROM. It is 4GB. Other parameter files will soft-brick your device since partition sizes are different.

ROM v1.2 flashed correctly to HPH 16GB & 32GB and should work without any modifications to Ugoos UT3.
If not working on Ugoos UT3, try these files.
http://www.mediafire.com/download/8x.../UT3_Files.rar

I am so sorry in advance to bother you.
but I really need help. Please, could someone help me?

my UGOOS is 4g/32G with the following firmware:
UT3_rooted_19.09.2014.img from ChinaGadgetsReviews.
This is one file of 450 MB.

So first, is this ROM suitable for the rest of the procedure ?

secondly, how do I use my own Resource.img and Boot.img during the flash of mo123 ROM ?

[fmoreira66]

Can you post the rom on the first thread or its already posted? I only see the older Rom for download, it make me confused

In the 1st post of mo123 you can find the download link for the latest ROM here:

Download link:
...
New: HPH RK3288 v1.2 2014/11/17 Here or Here

EDIT: Too late. I see that you also found it.

Please provide feedback if you successful flash the ROM in your box because I have the same and yesterday although I try many times I could pass the grey boot man...

Thanks

[Shadi86]

Srry I see the download link now thnx

[Shadi86]

Can you post the rom on the first thread or its already posted? I only see the older Rom for download, it make me confused

[Shadi86]

Will test the rom on my 4g/32

[Shadi86]

Yes I think so also

[mo123]

Hdmi CEC it's very good feature I have already asked tina if the Rk3288 chip support hdmi cec but maybe she forget to answer, btw maybe mo123 know anything

The hardware supports it, but not sure if a software setting/update also need to be implemented.

[mo123]

Hi mo123, I'm unable to download from Solidfiles because my antivirus do not like that site.
Are you able to provide a download link via Google Drive?
If not I will try to download again from Mediafire and hope for the best... :-)
Thanks.

You can download from different filehosts using jdownloader.org or Mipony.net
Yes the filesize is 489MB.
Maybe disable AV while downloading and flashing ROM.
Remember to also format before flashing the ROM.

[Shadi86]

Sv: HPH RK3288 ROM v1.0 by mo123 (20141026)

Hello Mo123,

Very nice job!
I install your rom 'from scratch' (i turn on format lower option) with R28 2Go/16Go ... 100% OK.

Just one point, Virtual unplug hdmi app isn't working in kitkat rom... just in JB rom.
So, i guess to turn off DRM control, you have to patch /sys/devices/virtual/switch to 0 directly in source (before compilation), or find another way. Hardwareguru dev knows a way. He use it for last KK rom for Minix X7.

Other point, is CEC supported in your last rom?

Thx.

Hdmi CEC it's very good feature I have already asked tina if the Rk3288 chip support hdmi cec but maybe she forget to answer, btw maybe mo123 know anything

[fmoreira66]

Also uploaded ROM to Solidfiles, filesize should be 489MB.

No need to substitute anything with files from 1.3.35 ROM, this is based on V1.3.35_141112 stock ROM.
Only use default parameter file - rk3288-3.10-uboot.parameter from v1.2 ROM. It is 4GB. Other parameter files will soft-brick your device since partition sizes are different.

ROM v1.2 flashed correctly to HPH 16GB & 32GB and should work without any modifications to Ugoos UT3.
If not working on Ugoos UT3, try these files.
http://www.mediafire.com/download/8x.../UT3_Files.rar

Hi mo123, I'm unable to download from Solidfiles because my antivirus do not like that site.
Are you able to provide a download link via Google Drive?
If not I will try to download again from Mediafire and hope for the best... :-)

EDIT: The new download from Mediafire has: 489 MB (512.840.006 bytes) do you confirm it is the correct size?

Thanks.

[roolmapool]

Hello Mo123,

Very nice job!
I install your rom 'from scratch' (i turn on format lower option) with R28 2Go/16Go ... 100% OK.

Just one point, Virtual unplug hdmi app isn't working in kitkat rom... just in JB rom.
So, i guess to turn off DRM control, you have to patch /sys/devices/virtual/switch to 0 directly in source (before compilation), or find another way. Hardwareguru dev knows a way. He use it for last KK rom for Minix X7.

Other point, is CEC supported in your last rom?

Thx.

[mo123]

Hi mo123, if I understood correctly you are saying that I should take your entire ROM and just substitute the boot.img and resource.img with the ones comming with the latest Nagrace HPH firmware 1.3.35, correct? And what about parameters? Should I use the 4Gb Userdata from Nagrace HPH firmware 1.3.35 or does not matter?
How can I check that I do not have a corrupted version of your ROM?
I will download it again just to have a fresh start.
Thanks.

Also uploaded ROM to Solidfiles, filesize should be 489MB.

No need to substitute anything with files from 1.3.35 ROM, this is based on V1.3.35_141112 stock ROM.
Only use default parameter file - rk3288-3.10-uboot.parameter from v1.2 ROM. It is 4GB. Other parameter files will soft-brick your device since partition sizes are different.

ROM v1.2 flashed correctly to HPH 16GB & 32GB and should work without any modifications to Ugoos UT3.
If not working on Ugoos UT3, try these files.

http://www.mediafire.com/download/8xsd11px8rs4rsk/UT3_Files.rar