This should be a full 900supersport 1.1 with all the usual fixes etc. Cube have updated the boot loader so I expect we may need to do a little work to get the kernel working in the ROM kit. As such in this ROM kit I've included three different Kernels (1.6 kernel as used in my earlier ROMs and both the stand alone and kernel embedded in boot.img) and the 1.1 and 1.2 boot loaders.
So if you are up for a challenge and want to help make this a full ROM kit rather than a BETA please download.
Instructions
I assume that you already have experience with flashing your cube or else you would not be flashing a BETA. There is always the chance of bricking your tab and screwdrivers may be required to fix.
- Download and unzip
- start the flash tool
- check bootloader and click on the small bot over to the right to allow you to navigate to the 900SupersportROM folder, and select the 1.20 bootloader
- put your cube into flashmode and connect
- erase idb
- flash
If it does not boot at all then put the tab into flash mode and try flashing just the kernel but select the alternate kernel kernel_b.img. Again please post with success/failure.
If it does not boot at all then put the tab into flash mode and try flashing just the kernel but select the alternate kernel kernel_1.6.img. Again please post with success/failure.
If it does not boot at all then put the tab into flash mode and try selecting and flashing boot loader 1.1. Again please post with success/failure.
Last attempt erase IDB and full flash selecting the 1.6 kernel and 1.1 boot loader. if this fails revert to my earlier ROM kit.
Based on the feedback received I will respond and update the ROM kit as required until we have a full ROM kit.
Link removed until I have a tester to work with.
Comment