If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Add touch screen support for Six Axis/Joy Center to my ROMs
Unfortantelly I wasn't that luck... I tried everything and no matter what, I always get 0 255 0 255 and the touch doesn't work. I tried diferent cables, projector and TV set (the TV is a 3D Samsung TV, so it's quite new...) and nothing, I cannot make touch profiles to work no matter what.
Maybe I made something wrong when I added the touch.ko module.... but when I do LSMOD I can see it, so don't think so.... is it possible that order of display in the modules when u do the LSMOD is important ? or any other ideas/suggestion to try ....?
Unfortantelly I wasn't that luck... I tried everything and no matter what, I always get 0 255 0 255 and the touch doesn't work. I tried diferent cables, projector and TV set (the TV is a 3D Samsung TV, so it's quite new...) and nothing, I cannot make touch profiles to work no matter what.
Maybe I made something wrong when I added the touch.ko module.... but when I do LSMOD I can see it, so don't think so.... is it possible that order of display in the modules when u do the LSMOD is important ? or any other ideas/suggestion to try ....?
Thanks !
Have you tried Lewy's ROM V2.2.2 yet? Touch module already added into ROM you don't need to add it. I also connect my MK808B to projector. My Sixaxis app (V0.6.4) said Touch module type B 0 1920 0 1080. You should try this way to make sure you have Touch module inside your ROM.
Have you tried Lewy's ROM V2.2.2 yet? Touch module already added into ROM you don't need to add it. I also connect my MK808B to projector. My Sixaxis app (V0.6.4) said Touch module type B 0 1920 0 1080. You should try this way to make sure you have Touch module inside your ROM.
I upgraded to lewys 2.2.2 720p. No luck still 0 255 0 255. Lends credence to it's a TV(Display Device) specific issue. I hate HDMI and Bluetooth. 2 of the worst tech specs to be implemented. Broken in so many ways... sorry... rant... Possibly the sixaxis app could be updated. I've emailed them but no response.
Anyone get successfully optemizing any touch only game with wired xbox controller through Bt/Joy Center app after adding touch modules. For me it doesnt work but sixaxis work good. I am using latest finless 1.7b rom.
I did ithe HYBRID Lewy ROm 720p
It also worked on my MK808B.
Confirmed both BOB`s 1.7 720p ROM after CWM touch.zip
and LEWy HYBRID 2.2.2 720p ROM work flawlessly with sixaxis
touch emulation.
ricont
Well it's started to work as of Lewy Hybrid mk808b 720p 2.2.3. I get 0 1920 0 1080 instead of 0 255 0 255 now. Yes 1080p on the 720p. Although I think by default the 720p rom still boots up at 1080p. I need to play with it some more.
Well it's started to work as of Lewy Hybrid mk808b 720p 2.2.3. I get 0 1920 0 1080 instead of 0 255 0 255 now. Yes 1080p on the 720p. Although I think by default the 720p rom still boots up at 1080p. I need to play with it some more.
I spoke too soon. I did a reboot (changed power supply) and it fell back to 0 255 0 255. Have confirmed that the 0 255 0 255 is an indicator of it not working. Tried rebooting with the HDMI cord not attached but no luck. I get the impression a setting gets overwritten maybe? N64oid runs better on 2.2.3 so that's good.
I spoke too soon. I did a reboot (changed power supply) and it fell back to 0 255 0 255. Have confirmed that the 0 255 0 255 is an indicator of it not working. Tried rebooting with the HDMI cord not attached but no luck. I get the impression a setting gets overwritten maybe? N64oid runs better on 2.2.3 so that's good.
Just an input.
It happen also on my MK808B it showed 0 255 0 255, I tried different resolution and rebooted
after each resolution setting, it did not recover with the reboot.
What i did was to return to the resolution it was working before and completely shutdown
the stick and totally removed the power.
I power ON again and the 0 1980 0 1080 returns back.
Some things stay persistent on a warm reboot. It takes a full power off to empty RAM. I am not talking NAND which is always persistent but the RAM.
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
Just an input.
It happen also on my MK808B it showed 0 255 0 255, I tried different resolution and rebooted
after each resolution setting, it did not recover with the reboot.
What i did was to return to the resolution it was working before and completely shutdown
the stick and totally removed the power.
I power ON again and the 0 1980 0 1080 returns back.
FYR
ricont
hrm, Well I set it back to the default 1920x1080 1080p setting the rom defaulted to. I powered down with the power button on the bottom bar. Selected Shutdown. Removed the USB cord from the power supply and put it back in. Didn't do the trick. Maybe I need to power down for some time? I tried some variations all including the above actions like making sure the hdmi was not plugged in and clearing data on the sixaxis app. I also tried uninstalling the six axis app. Powering down as above and installing again. Something is sticking....
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment