DOWNLOAD AVAILABLE snakerom UG007 II based on a finless imito mx1/2 1.7a rom

[hitman72]

ops, thank you. it's difficult to convert kernel.img in .zip format for clockworkmod recovery (just to try and test different kernel)? thank you again

edit: ok found method thank's leolas :-) thank you again to all :-)

[Abducted]

Finally got around to flashing this to my UG007-II.

Really like the looks, gives it a more modern feel.

Not sure if i notice anything about the performance scripts, it's very fast and responsive (with 1080p overclock kernel) but so was the Finless MX1/2 ROM.

Haven't noticed any problems so far. Great work!

[3r1s0n]

hi. who tell me how i can connect my UG007 II to pc to flash this FW?

[snakekiller]

hi. who tell me how i can connect my UG007 II to pc to flash this FW?

go to this thread for downloading the new rom.

http://www.freaktab.com/showthread.php?5006-snakegenmod-based-on-neotv-1-9

inside the folder you have a read me file .
follow this for installing the drivers.

[3r1s0n]

go to this thread for downloading the new rom.

http://www.freaktab.com/showthread.php?5006-snakegenmod-based-on-neotv-1-9

inside the folder you have a read me file .
follow this for installing the drivers.

So there is error 509

[3r1s0n]

go to this thread for downloading the new rom.

http://www.freaktab.com/showthread.php?5006-snakegenmod-based-on-neotv-1-9

inside the folder you have a read me file .
follow this for installing the drivers.

So there is error 509
But i need to know one thing. I try to conn
ect stick with my pc, but nothing . I try to use different cables (original from nokia and not original) pc doesnt see my stick.

[snakekiller]

So there is error 509
But i need to know one thing. I try to conn
ect stick with my pc, but nothing . I try to use different cables (original from nokia and not original) pc doesnt see my stick.

in settings on the stick go to usb and tick , connect to pc
added a skydrive link

http://sdrv.ms/12Htrb9

[3r1s0n]

in settings on the stick go to usb and tick , connect to pc
added a skydrive link
http://sdrv.ms/12Htrb9

i try to use finless manual for ug802:
To put the UG802 into flash mode the easy way:
1) Remove any SDcard you may have installed.
2) Connected the supplied USB cable from the device OTG port to your PC.
It will power up and windows may detect the device. DO not worry about that. We need it powered up.
3) In the ROM kit run the ROM FLash Tool.exe.
4) You should see at the bottom it says "Found RKAndroid Mass Storage USB"
If it does not say that go into settings and make sure that
a) USB storage is turned ON
b) Under developer options, USB debugging is turned off
5) Once it says "Found RKAndroid Mass Storage Usb" in the flash tool click the "Reboot to Flash Mode" button.
6) Wait up to at least 10 seconds. The unit should reboot and the screen for the UG802 will be black (no ouptut).
7) If the unit does not reboot to a blank screen, repeats steps above
Congrats! You are now in flash mode! To get out of it at any time just unplug the USB power to the UG802.
It will boot back up normally out of flash mode.


If reboot to flash mode does not work, then use this alternate proceedure.
In my ROM kit is another folder called alternate_reboot_to_flash_tool
This is the RKBatch tool. Run this tool and the 1 box should be pink.
If it is not pink again make sure:
a) USB storage is turned ON
b) Under developer options, USB debugging is turned off
Once you have a pink box, Click the "switch" button at the bottom and this should put it into flash mode.
Close this RKBtach tool now.
4 step of this manual dont work for my stick.

[snakekiller]

if you love my tweaks on this rom .
i maked one with a rom from neomode too.
on neomodes rom is the mac adress good (name instead of 0000000000000)
i just uploaded a new update with more tweaks en ui mods.

here is the link to the topic

http://www.freaktab.com/showthread.php?5006-snakegenmod-based-on-neotv-1-9-for-UG007II-or-imito-MX1-MX2&p=67502&viewfull=1#post67502

[snakekiller]

someone reported a blurry netflix issue with this rom.
i said try the modded snakegen rom from neomode .
he reported back thats everything works perfect now .