Tronsmart T428 thermal problem

[Spotopolis]

Hi guys:

After last time we talked about the heatsink, i have contacted the factory immediately and push them to change that, now the t428 has all shipped with aluminum heatsink, check the following photos:...


Only a very few pcs at first will have s0s ones heatsink, if you really have the heat problem, please make sure to contact our customer service, and they will offer you some solution.

Geekbuying

It would also be nice to receive another update on my shipping info. last bit of info I got was it left the dispatch center on 4-25... that was over two weeks ago and I haven't gotten a single update since then.

[s0s]

Hi guys:

After last time we talked about the heatsink, i have contacted the factory immediately and push them to change that, now the t428 has all shipped with aluminum heatsink....

Thank you for your comment.
The heatsink itself is not there problem.
Place the board in a case and you'll see that he is still useable hot.
The problem is that can not be discharged the heat to the outside.

I post my, hope finally successful, action next week.
I have to wait for my ordered parts.

It would also be nice to receive another update on my shipping info. last bit of info I got was it left the dispatch center on 4-25... that was over two weeks ago and I haven't gotten a single update since then.

do not trust the tracking service.
my status:
QUOTE
The shipment has arrived in the destination country
END QUOTE
but my stick is already here

[csjohnny]

The rk3066 device temperature is max 85C.
RK3066 datasheet. http://www.giayee.com/uploadfile/201...6054130906.pdf
42. page Operating temperature min. -40C max. 85C
If the RK3188 device temperature is 52C then no problem.
But need a heatskin.

[s0s]

The rk3066 device temperature is max 85C.
RK3066 datasheet. http://www.giayee.com/uploadfile/201...6054130906.pdf
42. page Operating temperature min. -40C max. 85C
If the RK3188 device temperature is 52C then no problem.
But need a heatskin.

Hi csjohnny
Thanks for the information.
Read my first contribution, at a outsidetemperature of 53.8 crashes the stick.
I could not measure how high the temperature was internally.

[csjohnny]

Hi guys:

After last time we talked about the heatsink, i have contacted the factory immediately and push them to change that, now the t428 has all shipped with aluminum heatsink, check the following photos:


Only a very few pcs at first will have s0s ones heatsink, if you really have the heat problem, please make sure to contact our customer service, and they will offer you some solution.

Geekbuying

This is no good. This not a heatsink. This is a aluminium plate.
That's better than nothing.
A good heat sink is how it works, see the picture:

[csjohnny]

Hi csjohnny
Thanks for the information.
Read my first contribution, at a outsidetemperature of 53.8 crashes the stick.
I could not measure how high the temperature was internally.

Sorry not see. Then is big problem.
My RK3066 device temperature is 55C if playing game and work.

[s0s]

news from the front
on the bottom of the sticks fits really a cool body.
It can be up to 1mm thick
I'm not finished yet but I have to test.
The heat sink has to Antuto 39.8°C
From Monday you continue.



processorside and case with cutout (not perfect but ....)



CPU and memory Heat Sink



side



in housing

[WatchFan1]

Very clever and looking good. Thank you for sharing !

Just a heads-up to everyone.
Be careful and do not click on any of many popup ads where these images
are hosted. Some come up as fake (legit looking) FLASH UPDATE pages and will install
a bunch of junk instantly on your PC if you click on them.
(Happened to my friend who is not that computer savvy and who told me about this thread)

[s0s]

Just a heads-up to everyone.
Be careful and do not click on any of many popup ads where these images
are hosted. Some come up as fake (legit looking) FLASH UPDATE pages and will install
a bunch of junk instantly on your PC if you click on them.
(Happened to my friend who is not that computer savvy and who told me about this thread)

Use a popupblocker (i have FF+ adblock)

[csjohnny]

news from the front
on the bottom of the sticks fits really a cool body.
It can be up to 1mm thick
I'm not finished yet but I have to test.
The heat sink has to Antuto 39.8°C
From Monday you continue.



processorside and case with cutout (not perfect but ....)



CPU and memory Heat Sink



side



in housing

Very good. Congratulations.
If you have a problem, do part of a ventilation system.
http://www.****.com/itm/25mm-Small-F...item35bff762a6

[s0s]

http://www.****.com/itm/25mm-Small-F...item35bff762a6

good to know.
I still do not need a fan, I have several times AnTuTu and the
stability test run, everything without problems or crash.
To the underside still needs a heatsink glued and i think then it's perfect.

[s0s]

got the last parts today



the idea



work in progress (yes yes I know)



finished



so that the topic cooling has done for me here

Edit
Shilds an Logo added

[csjohnny]

got the last parts today



the idea



work in progress (yes yes I know)



finished



so that the topic cooling has done for me here

Edit
Shilds an Logo added

Very cool! Where can I buy a heatsink? What is the temperature when you are playing now?

[s0s]

Where can I buy a heatsink?

For cpu and ram i ripped a very old nvidia grfikcard
the orther try a serach vor 320966208212 on ****

[mustanley]

Here's a mockup with some heatsinks I had. Will have to see if my Arctic Silver thermal epoxy is still any good before I glue them on.