Official Android 4.2 for MK802 III

[Trollgeir]

Ok i start tomorrow evening again.

Verstuurd van mijn GT-S5660 met Tapatalk

Alright! Well keep up the good work

[snakekiller]

Alright! Well keep up the good work

ok im back with a idea.

download this.

http://sdrv.ms/14rjJsX

this are the original files from the stock rom.
open my last romkit.
go to the snakerom folder and replace the kernel.img with the original .
look if it flash succesfull.
if you have a download check faill then you must replace the parameter file also with the one from the stock rom.
the problem for the wifi is the kernel that i took from finless with this stick.
so normally it must work now with my modded stock rom

[m4gn3to]

Hi.

I'm not sure if my minipc is the 802III but the case says AK-802 and it has bluetooth, headphone connector, and a reset conector near HDMI port.

I've tried your last rom and it works ok but I don't have bluetooth neither wifi, the wifi does nothing.

My wifi/bluetooth chip is a RK903.

Thanks

[Trollgeir]

Hi.

I'm not sure if my minipc is the 802III but the case says AK-802 and it has bluetooth, headphone connector, and a reset conector near HDMI port.

I've tried your last rom and it works ok but I don't have bluetooth neither wifi, the wifi does nothing.

My wifi/bluetooth chip is a RK903.

Thanks

I believe you either have one of these;

Uhost U2 - RK903 (BCM40183 - Broadcom 4330 Based Chipset) (Bluetooth v3.0)
MK808B - RK903 (BCM40183 - Broadcom 4330 Based Chipset) (Bluetooth v3.0)
Minix Neo X5 - RK903 (BCM40183 - Broadcom 4330 Based Chipset) (Bluetooth v3.0)

I recommend trying to look for roms based on those models, this one isn't for your device.

[m4gn3to]

Thanks I'll search for this ones...

[Flegias]

Wifi doesn't work

Hello,
I bought 5 mk802IIIs Rikomagic and they all have 4.2.2 onboard.

Because of the high resolution of them I decided to downgrade the firmware to 4.1.
Everything goes well except for the wifi. It doesn't work.

I tried every possibile stock and custom ROM but wifi still doesn't work. I reflash the 4.2.2 custom ROM but it's all the same.

Should I take some wifi files from the others devices and copy them on the corrupt one?
Help please!!!

[MattWest]

You proberly have the new version with AP6210 wifi/BTchip so the normal stock FW is not working for You.
Look in the thred: http://www.freaktab.com/showthread.p...ll=1#post98881

RM have 2 dowload links first the AP6210 and secund is for the normal old ones.

I think it no 4.1 FW for the AP6210 but You can always puting down the HDMI to 720P and You geting more CPU for the apps

[Flegias]

You proberly have the new version with AP6210 wifi/BTchip so the normal stock FW is not working for You.
Look in the thred: http://www.freaktab.com/showthread.p...ll=1#post98881

RM have 2 dowload links first the AP6210 and secund is for the normal old ones.

I think it no 4.1 FW for the AP6210 but You can always puting down the HDMI to 720P and You geting more CPU for the apps

Yes, finally I downloaded the firmware for the "RKM" and the wifi works again, thank you.

Even if I put 720P I notice no differences on the screen and this is an important characteristic for me!

I'm going to install this Finless 2.1 ROM http://www.freaktab.com/showthread.p...l=1#post100755

Hope to solve it!
Thank you

[dim]

Even if I put 720P I notice no differences on the screen and this is an important characteristic for me!

Hi. If you want only get another resolution, you can just change it.

1. Open Root Explorer.
2. Go to /system
3. Click on Mount RW (It should appear as Mount RO, that’s when it is correct!)
4. Look for build.prop. Long press on the file and press Open file in Editor
5. Scroll down to ro.sf.lcd_density=160
6. Change the value to 200 (or another). The lower the value, the higher density your screen will have.
7. Click on the Menu button, and Save and Exit.
8. Reboot.

Try to do it. You will have 1080p look like 720p.