MK 802 IIIs hang

[nimir]

I install firmware snakerom, previously I had original 4.1.1 and i go to bootloader from terminal.
Now after first bootking new rom everything was ok, but next boot it hang, I cannot switch to bootloader only to recovery.
MK not start when it is connected to laptop.
Can anybody halp me?

[snakekiller]

I install firmware snakerom, previously I had original 4.1.1 and i go to bootloader from terminal.
Now after first bootking new rom everything was ok, but next boot it hang, I cannot switch to bootloader only to recovery.
MK not start when it is connected to laptop.
Can anybody halp me?

did you change something to the system between first and second boot?

[nimir]

wi fi setting google account some basic...

[snakekiller]

wi fi setting google account some basic...

first after reflash go to settings/storage.
mount the internal nand and format it.
and do then a reboot.

[nimir]

how to reflash when I can not see my mini in my computer?

[nimir]

@snakekiller now I can not start system so I can't format nand
What to do?

[snakekiller]

how to reflash when I can not see my mini in my computer?

in the package you have a folder alternate reboot.
see this prog. your stick.
if not you must put your stick to maskrom mode.see picture.
this do you , to open the case and schortpin the dots with a small screwdriver or something
HOLD IT.
and connect the device to the pc. like you connect it for flashing.
you will see that the flashtool says found rk maskrom device.
if not you do not hold the 2 dots good enough.
try again than.
if you have succes click erase idb.
then tick the loader.
then click on run.
after that your stick is flashed again.


its the 2 round dots you must shortcut.
for maskrom mode.

[nimir]

flash tool not see minipc
so... i have brick

[nimir]

computer not recognize android, even not see any device... like switched off..

[snakekiller]

flash tool not see minipc
so... i have brick

just shortpin the 2 dots like on the picture and you can flash it again .
because your pc will see the device.
i do it all the time for testing stuff.

[nimir]

flash tool not see device

Nothing ... my mk is dead

[snakekiller]

flash tool not see device

Nothing ... my mk is dead

you don't do it right then.
have you 2 mini usb ports?
sow yes try the other one while you shorts the pins.

[snakekiller]

you don't do it right then.
have you 2 mini usb ports?
sow yes try the other one while you shorts the pins.

or take another usb cable.

[nimir]

I checked 3 cables... and nothing.. I heard so not only I have this issue..
Just loosing of money..

[snakekiller]

I checked 3 cables... and nothing.. I heard so not only I have this issue..
Just loosing of money..

its not my rom if that is what you mean i just reflashed it again on my stick .
and rebooted 3 times after reflashing and boots always fine .