Beelink SEA I TV Box Realtek 1295 Quad Core CPU - 2GB+16GB

[mrcina2102]

Yes i know, but when i look at youtube videos, every device on video has memory usage somwehere around 35-45%. Can someone tell me is this normal or should i report this to Beelink?

[superceleron]

well maybe someone with the 2/16 can help you!

[KingNothing]

With a new cable, I have managed to install superceleron SCV2 !
Sorry for lost time for all of you...

[rfmanning]

No HDMI audio output.

Powered down SEA I, 32GB a few days ago after watching a video on KODI 17. Upon power up, I have no audio (HDMI). No mouse click, no video audio. Restored box to original factory. Still no HDMI audio. Connected Bluetooth headphones; audio via Bluetooth headphones. Connected SPDIF cable to sound system; have audio through SPDIF to sound system.

So, no HDMI audio (video only).
audio via Bluetooth headphones
audio through SPDIF to sound system

HDMI was working, audio and video. Now, video only.
Changed HDMI cable to new cable.
Changed HDMI input to TV to verified working input.
Checked TV settings to verify CEC was operational. TV sees SEA I box in setup.
Tried all HDMI settings on SEA I settings menu.
Reset to factory settings via settings menu.

I am at a loss to correct this.

[superceleron]

With a new cable, I have managed to install superceleron SCV2 !
Sorry for lost time for all of you...

Glad it work out

No HDMI audio output.

Powered down SEA I, 32GB a few days ago after watching a video on KODI 17. Upon power up, I have no audio (HDMI). No mouse click, no video audio. Restored box to original factory. Still no HDMI audio. Connected Bluetooth headphones; audio via Bluetooth headphones. Connected SPDIF cable to sound system; have audio through SPDIF to sound system.

So, no HDMI audio (video only).
audio via Bluetooth headphones
audio through SPDIF to sound system

HDMI was working, audio and video. Now, video only.
Changed HDMI cable to new cable.
Changed HDMI input to TV to verified working input.
Checked TV settings to verify CEC was operational. TV sees SEA I box in setup.
Tried all HDMI settings on SEA I settings menu.
Reset to factory settings via settings menu.

I am at a loss to correct this.

That is weird, did you go to sound settings to check the setting is ok(hdmi)?

[rfmanning]

That is weird, did you go to sound settings to check the setting is ok(hdmi)?

I tried all the settings in the HDMI menu. Even reset to factory.

[superceleron]

I tried all the settings in the HDMI menu. Even reset to factory.

i mean the sound menu, its there the place where you change the hdmi spdif etc..
But audio is only on videos? on every video app?

[rfmanning]

i mean the sound menu, its there the place where you change the hdmi spdif etc..
But audio is only on videos? on every video app?

Yes, Sound > HDMI output > (Now set to RAW),
S/PDIF Output (Now set to LPCM 2CH),
Playback effect (Now set to OFF),
Only Output over S/PDIF (Now set to OFF).
HDMI Rx Audio Format PCM
Media Volume near Max



The present state of the box is at a factory reset, NO apps installed. I have a couple videos on the hard drive. I can access them via the built in file explorer. The file explorer will play them via HDMI (video only) and audio output to the Bluetooth headphones or speaker bar / system via S/PDIF. I can not even get mouse clicks over HDMI. And yes, I can hear the mouse clicks via Bluetooth headphones and Speaker system connected via S/PDIF. I just can't get any sound via HDMI.

Oh, yeah, the quick test for sound, aside from the mouse clicks, I've been using is the built-in game; Fishing Joy. No audio on it either. There should be the music accompaniment.

I stand corrected. I no longer have any audio from any source. Bluetooth and SPDIF no longer works.

[Sunam]

I no longer have any audio from any source. Bluetooth and SPDIF no longer works.

Well, it is unlikely that all three sound outputs simultaneously suffered a hardware malfunction. So, if it is a software problem, you could start flashing available firmwares to see if it helps. There are not many ROMs available so far: 101, 102, 103 (103 OTA), plus two SCV custom ROMs by superceleron (based on 102 and 103 OTA). I suggest you start with 103 firmware or superceleron's SCV2.

[superceleron]

Yes, Sound > HDMI output > (Now set to RAW),
S/PDIF Output (Now set to LPCM 2CH),
Playback effect (Now set to OFF),
Only Output over S/PDIF (Now set to OFF).
HDMI Rx Audio Format PCM
Media Volume near Max



The present state of the box is at a factory reset, NO apps installed. I have a couple videos on the hard drive. I can access them via the built in file explorer. The file explorer will play them via HDMI (video only) and audio output to the Bluetooth headphones or speaker bar / system via S/PDIF. I can not even get mouse clicks over HDMI. And yes, I can hear the mouse clicks via Bluetooth headphones and Speaker system connected via S/PDIF. I just can't get any sound via HDMI.

Oh, yeah, the quick test for sound, aside from the mouse clicks, I've been using is the built-in game; Fishing Joy. No audio on it either. There should be the music accompaniment.

I stand corrected. I no longer have any audio from any source. Bluetooth and SPDIF no longer works.

Well your box have a hw problem!

[blinkone]

SEA I_104MO is out via OTA





No change log

[KAA]

mine nothing

[Sunam]

mine nothing

Same here, 32 Gb version. Looks like they are correcting something in firmware 104, maybe they've found some critical bugs or are adding features like a new logo...
UPD: firmware 104 MO finally arrived via OTA :-)

[KAA]

chrome crash firmware 104MO

[mrcina2102]

I have problem with newest OTA update of firmware 104MO released on May, 9th. When i download it and press install, after few seconds i got an error as shown in the picture. I have removed everything from the box (SSD, usb dongle) before installation. Maybe anyone can help?