HPH NT-V8 RK3368 Marshmallow ROM by mo123

[gefattern]

Hi Shomari ,

i really think Mo has no Problem with that , but for sure you can ask him ??? if you want.

I will be very happy if i could Boot without this PIcture only "Android".

I tried but failed i think Sergio Pov. Tool does not Support RK3368 even if it extract it.

Shall i upload a extracted "boot.img" from Mos latest MM for you ??? , or do you have the FW self ???

thanks for Help

gefattern

[Shomari]

Hi Mo ,

i tried to delete the first boot Picture "Nagrace" , but i failed , tried it with Sergio Poverony latest Tool , deleted the Pic , but after build and flash it was still there.

Dont know how to do it.Can you help me with that ??? i want stock "Android" Bootscreen.Maybe you can build one and upload ???

Here is the Pic of the Batt :

I can make you one without the nagrace image, but only with mo123's permission. He puts it there to identify his work, I wouldn't feel comfortable removing that on someone else's box without his blessing. I feel the same way about revealing the ways to remove it in this specific context.

I know you just want the box to not say Nagrace because yours is a Ugoos machine, and not for any inappropriate reasons.

[gefattern]

Hi once more ,

does Sergio Pov. Tool support RK3368 ???


nice Day

gefattern

[gefattern]

Hi Mo ,

i tried to delete the first boot Picture "Nagrace" , but i failed , tried it with Sergio Poverony latest Tool , deleted the Pic , but after build and flash it was still there.

Dont know how to do it.Can you help me with that ??? i want stock "Android" Bootscreen.Maybe you can build one and upload ???

Here is the Pic of the Batt :

[shivattaque]

It should happen automatically the HDMI pass-through when using NTMC or Kodi 17.
Also update the firmware for your audio receiver if it has updated firmware.
Then enable pass-through in NTMC or Kodi 17's settings.
Please let me know if it works.
I'm still trying to find a way to add the sound settings.

Sorry but it does not work in Hdmi passthrough.

I tested with NTMC and FTMC.

It works with ROM HPH NT-V8 ROM V1.6 (Dolby Digital et DTS) but no Marshmallow. (on HPH NT-V8 ROM V1.6 no DTS HD Master / Dolby Digital True HD option)


My equipment: (http://fr.yamaha.com/fr/products/aud..._g/?mode=model)

[mo123]

mo123 , if i flash original ressource ...my original remote work ?

No, it will probably brick your device.
Only Zidoo has the correct driver source code for the remote.

[natzen]

mo123 , if i flash original ressource ...my original remote work ?

[mo123]

Hi,
I have not found the place where it finds Hdmi passthrough setting in android options?

It should happen automatically the HDMI pass-through when using NTMC or Kodi 17.
Also update the firmware for your audio receiver if it has updated firmware.
Then enable pass-through in NTMC or Kodi 17's settings.
Please let me know if it works.
I'm still trying to find a way to add the sound settings.

[mo123]

Hi Mo ,

but UT4 has RTC , it has a small Batt. inside and why the UT3 has not such Problems and the Time stays same ???

Now its to dark for a Picture i make one in Daylight to show you the RTC Batt on UT4.

Something other strange i connected a Fan to the Connector , at the Moment the Box is open , placed him beside the Board ,

did not spend much Attantion for a Moment , the Fan falls to Board only on a Corner , but now the Fan becomes no Power if

i connect him again. The Fan works still i tested him. Can it shorten the Power Settings to OFF ??? Really strange.

What about Xposed and Recovery ??? can i use them ???

once more nice Day

gefattern

If you can see the name of the RTC battery or find out from Ugoos, I can add the driver then maybe the time setting will be remembered without internet access.

[shivattaque]

Hi,
I have not found the place where it finds Hdmi passthrough setting in android options?

[gefattern]

Hi Mo ,

but UT4 has RTC , it has a small Batt. inside and why the UT3 has not such Problems and the Time stays same ???

Now its to dark for a Picture i make one in Daylight to show you the RTC Batt on UT4.

Something other strange i connected a Fan to the Connector , at the Moment the Box is open , placed him beside the Board ,

did not spend much Attantion for a Moment , the Fan falls to Board only on a Corner , but now the Fan becomes no Power if

i connect him again. The Fan works still i tested him. Can it shorten the Power Settings to OFF ??? Really strange.

What about Xposed and Recovery ??? can i use them ???

once more nice Day

gefattern

[mo123]

Hi Mo ,

Until now i had only two Apps that made Problems ; Rootexplorer and Catlog , both not react.Maybe no MM support ? I dont know.

I made a first View because of Translations 99% is good only a few things still to translate like "Ethernet" and some other parts.

But the Clock makes Problems , after every Reboot the Time is changed.Now it was 4:05 / 24H Format / after Reboot / 20:05 .

Only online it turns back to the right Time.


have a nice Day


gefattern

Because tv boxes don't have built-in batteries like PC's to save the time, you need to be online to get the correct time.
Some expensive tv boxes have built-in batteries that can keep the time without an internet connection.

[gefattern]

Hi Mo ,

Until now i had only two Apps that made Problems ; Rootexplorer and Catlog , both not react.Maybe no MM support ? I dont know.

I made a first View because of Translations 99% is good only a few things still to translate like "Ethernet" and some other parts.

But the Clock makes Problems , after every Reboot the Time is changed.Now it was 4:05 / 24H Format / after Reboot / 20:05 .

Only online it turns back to the right Time.


have a nice Day


gefattern

[gefattern]

Hi Mo ,

okay i try , but can u say somthing about Xposed and can i use the TWRP that i used for LP ???

I use W7 32bit Ultimate. / is "Cast" double ???

have a nice Day


gefattern

[mo123]

gefattern
What Windows are you using?
I used Windows 8 but think Net framework was already installed by Windows Update by itself and didn't get any problem.
If you change the strings.xml file manually, you can use Notepad++ to do it since other apps can corrupt the file then I can't use it.

https://notepad-plus-plus.org/download/

Just do the main translations that you can see that are wrong or need improvement when using Android otherwise it would take a few days to do everything.
You can make your own txt file also.
Then I can use the important translations first and later if there are more, then can do a small update again.