HPH NT-V8 RK3368 Marshmallow ROM by mo123

[gefattern]

Hi Mo ,

thanks for answer , good i flash the 1.2 Version now , first impressions are good , but Time&Date still goes back to 16.1.2011 (offline)

the ntp sync Function and App i test later.

The German Translation need still corrections , did u really used my "HpHLauncher Translations ??? I know that "Alle Aufgaben Mörder" is

not from me and total wrong.If u add one German word like "eines" this means : The tasks of a Killer , this is not right .

I wrote "Alle Prozesse reinigen" , Android has nothing to do with killing human.

The System need corrections too , i report later , the two title of " Töne&Benachritigungen" are wrong " Benachrichtigungen" is right.

A few things more must be changed ,the Rest is good.

Nice that u want to make a "UgoosVersion" of your Rom , i hope that it will be used by many Users.You know i always debloat my Roms

and change many Apps that i prefer , even build.prob changes for Device.


have a nice Day

Greetings


gefattern

[shivattaque]

Kodi 17:

https://ufile.io/07d321

https://ufile.io/a6b85

RKMC:

https://ufile.io/ad7e9

https://ufile.io/1fca4

[Shomari]

... those logs are showing nasty segfaults due to Play Services.

BTW, RK's implementation of IEC HD audio is currently terrible. The only builds I've seen that can properly initialize the sink cause major video issues (not with that silly RKcodec, but with mediacodec, although RKcodec is a bust to begin with). Doesn't look good unless RK changes its tune on actually supporting public apis instead of putting its resources in its dead end RKcodec.

[mo123]

OK, Those logs will help a lot for SPMC. Last one, can you do RKMC with all the debug logging settings from post #137 and post the log and then just after that the Syslog logs again and upload the zip. I'm going to report it to try to find the cause of the whole pass-through problem. Maybe it is just something small to change.

[shivattaque]

https://ufile.io/b6cc0

Sorry for the extras but I did not understand how it worked

[mo123]

{Please flash this boot.img and then test pass-through again in RKMC, Kodi 17 and 'Video' player.
https://mega.nz/#!1cFAERjY!BrBwxCJ7g...T-mLt54ra_BAMw
Change the location of the boot.img by clicking the last block.
The location in the second column must be 0x00008000 and only boot selected in the first column.
Click Run to flash.}

https://ufile.io/f1f74

https://ufile.io/714ef

One extra thing you can do that will really help.
Install Syslog

https://play.google.com/store/apps/details?id=com.tortel.syslog

Then root from Android Settings - Accessibility Options - Root system and restart

In Kodi 17/18 and RKMC - System - System - Logging
Enable all these
-Enable event logging
-Enable component specific logging
-Specify component specific logging - Choose Verbose logging for FFmpeg libraries, Verbose logging for the audio component, Verbose logging for the Video component.

Then run the video tests again.
After testing in 2 different Kodi's eg. Kodi 17.0 and RKMC(important to try RKMC)
Then run Syslog app and choose to get all logs.
It will ask for root access, say yes.
Then press get logs again.
Upload the zip file with the logs.

(Check that 'number of channels' in Kodi audio settings is set to 2.0 again)

[shivattaque]

{Please flash this boot.img and then test pass-through again in RKMC, Kodi 17 and 'Video' player.
https://mega.nz/#!1cFAERjY!BrBwxCJ7g...T-mLt54ra_BAMw
Change the location of the boot.img by clicking the last block.
The location in the second column must be 0x00008000 and only boot selected in the first column.
Click Run to flash.}

https://ufile.io/f1f74

https://ufile.io/714ef

[lnchu]

Try a different USB port.
Don't use USB ports on the front of a PC or laptop, use back USB ports.

Yes, I tried both the front and back USB ports. Also using another windows PC still cannot connect to the device.

[mo123]

I successfully flashed your v1.1 from the original zidoo firmware, so drivers and flash tool are correctly installed. The flashing steps also OK. I again test it out with the rk3188 cs968 and immediately get device =loader and Id=2 on port2 . Tried many times still not found for the v1.1 device.

Try a different USB port.
Don't use USB ports on the front of a PC or laptop, use back USB ports.

[lnchu]

Are the drivers installed correctly?
Hold a paperclip in the reset hole, connect a USB to USB cable to the OTG USB port of the X6 and connect the other end to the PC.
Connect the power while still holding in the paperclip.
Release the paperclip.
http://blog.zidoo.tv/2015/11/how-to-...oo-x6-pro-box/

I successfully flashed your v1.1 from the original zidoo firmware, so drivers and flash tool are correctly installed. The flashing steps also OK. I again test it out with the rk3188 cs968 and immediately get device =loader and Id=2 on port2 . Tried many times still not found for the v1.1 device.

[Jura46]

Новый загрузочный ОК
Waiting for ugoos!

[mo123]

Hi Mo ,

thanks for answer , so it is not important if i use 11.3 or 12.3 Version and why making a Ugoos Version , or did i understood something wrong. Do you mean the Build.prob changes or what ???

The most i can do by my self but not the "not parse"Parts , it still says HPH in GoggleAccount , but i am not sure i have to check.


have a nice Day

Greetings

gefattern

The 12.3 version fixes the Google Play not opening on the 11.3 version.
The Ugoos version will have all HPH removed and their apps, so it will be slightly different.

[mo123]

I can load the v1.2 image using the flash tool but cannot found any load device after pushing the reset button with the power unplugged then plugged in again. Tried with an cs968 for testing purpose ,load device found right away.

Are the drivers installed correctly?
Hold a paperclip in the reset hole, connect a USB to USB cable to the OTG USB port of the X6 and connect the other end to the PC.
Connect the power while still holding in the paperclip.
Release the paperclip.

http://blog.zidoo.tv/2015/11/how-to-flash-zidoo-x6-pro-box/

[gefattern]

Hi Mo ,

thanks for answer , so it is not important if i use 11.3 or 12.3 Version and why making a Ugoos Version , or did i understood something wrong. Do you mean the Build.prob changes or what ???

The most i can do by my self but not the "not parse"Parts , it still says HPH in GoggleAccount , but i am not sure i have to check.


have a nice Day

Greetings

gefattern

[lnchu]

I can load the v1.2 image using the flash tool but cannot found any load device after pushing the reset button with the power unplugged then plugged in again. Tried with an cs968 for testing purpose ,load device found right away.